University of Virginia Library

Search this document 
  

collapse section 
  
  
  
  
collapse section1. 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
collapse section1. 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
collapse section3. 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
collapse section4. 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
collapse section5. 
  
  
  
  
  
  
  
  
  
  
  
  
collapse section6. 
  
  
  
  
  
  
  
  
  
collapse section7. 
  
  
  
  
  
  
  
collapse section8. 
  
  
  
  
  
  
  
  
  
collapse section9. 
  
  
  
  
  
  
  
  
  
  
  
collapse section10. 
  
  
  
  
  
  
  
  
  
  
  
  
  
collapse section11. 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
collapse section 
  
  
  
collapse section 
  
  
  
collapse section 
  
  
collapse section 
  
  
  
  
  
collapse section 
  
  
  
  
  
  
  
  
collapse section 
  
  
  
  
  
  
  
collapse section 
  
  
  
  
collapse section 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
collapse section 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
collapse section 
  
  
  
  
  
  
  
collapse section 
  
  
  
  
  
  
collapse section 
  
  
  
collapse section 
  
  
  
  
collapse section 
  
  
  
collapse section 
  
  
  
collapse section 
  
  
  
  
collapse section 
  
  
  
  
  
  
  
  
  
collapse section 
  
  
collapse section 
  
  
  
  
collapse section 
  
  
  
  
  
  
  
  
  
collapse section 
  
  
  
  
  
  
  
Glossary
collapse section 
  
  
  
  
  
  
collapse section 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

Glossary

abacus:

the upper member (usually a flat slab) of the capital of a column that supports
the architrave: in the Tuscan, Doric, and Ionic orders a square flat plate but in
the Corinthian and Composite variously cut and ornamented

andiron:

one of a pair of metal supports for firewood used on a hearth and made of a
horizontal bar mounted on short legs with usually a vertical shaft surmounting
the front end.

arch:

a curved span across an opening

architrave:

the lowest division of an entablature resting in classical architecture
immediately on the capital of the column, or the molding around a rectangular
opening (as a door or window)

astragal:

a narrow half-round molding; also a projecting strip on the edge of a folding
door

bat:

a sun-dried brick

bead:

a projecting rim, band, or molding

bond-timber:

horizontal pieces, built in stone or brick walls, for strengthening them

burr:

a clinker

capital:

the uppermost member of a column or pilaster crowing the shaft and taking the
weight of the entablature, and often richly carved

cavetto:

a concave molding having a curve that roughly approximates a quarter circle

chimney-breast:

the projecting part of the wall between the chimney-flue and the room

chimney-shaft:

a chimney-stalk

chimney-stalk:

the part of a chimney which rises, detached, from a house-top

clinker:

overburned or partly vitrified bricks

coffer:

a sunken panel in a ceiling or soffit, of ornamental character, usually decorated
in the centre with a flower or the like; the spaces between the heads of the
modillions and mutules

Composite:

relating to or being a modification of the Corinthian order combining angular
Ionic volutes with the acanthus-circled bell of the Corinthian

cope-stone:

one of the stones forming the coping of a wall

coping:

the uppermost course of masonry or brickwork in a wall, usually made of a
sloping form to throw off rain

cornice:

the molded and projecting horizontal member that crowns an architectural
composition, or a top course that crowns a wall

corona:

a member of the cornice, above the bed-moulding and below the cymatium,
having a broad vertical face, usually of considerable projection; also called drip
or larmier

course:

a continuous layer of bricks or stones of uniform height in a wall or foundation

cross style:

id est, stile

cymatium:

an ogee, an Ionic colute

dado:

the block or cube, with plane faces, forming the body of a pedestal, between the
base moldings and the cornice; also the finishing of wood running along the
lower part of the walls of a room, made to represent a continuous pedestal,
strictly applied only to the flat surface between the plinth and the capping; also
a cornice or dado molding, the capping or surbase

dentils:

small rectangular blocks under a classical cornice

entablature:

the upper section of a wall or story that is usually supported on columns or
pilasters and that in classical orders consists of architrave, frieze, and cornice

facing:

a layer of stone or brick applied to the face of an external wall

fillet:

a narrow flat architectural member, either a flat molding separating others, or
the space between two flutings in a shaft

flagstone:

naturally stratified slabs of stone used for paving

flute:

a rounded groove, specifically, one of the vertical parallel grooves on a
classical architectural column

frieze:

the part of an entablature between the architrave and the cornice, or a sculptured
or righly ornamented band (as on a building), or a band, line, or series
suggesting a frieze

gable:

the vertical triangular end of a building from cornice or eaves to ridge

girt measure:

measurements that take into account the entire surface, including depressions
and projections

hame:

one of two curved projections which are attached to the collar of a draft horse
and to which the traces are fastened

hearth:

the paved or tiled floor of a fireplace on which a fire is made

impost:

the upper course of a pillar or abutment, frequently projecting in the form of an
ornamental moulding or capital, on which the foot of an arch rests

lintel:

a horizontal architectural member spanning and usually carrying the load above
an opening such as a window or door

listel:

a narrow band in architecture: a fillet

metopes:

the recessed portion alternating with fluted triglyphs on the frieze

mezzo-rilievo:

a sculpture or carving in which the figures project half their true proportions
from the surface on which they are carved

modillions:

projecting brackets or blocks placed in series under the corona of the cornice in
the Corinthian, Composite and Roman Ionic orders

molding:

a decorative recessed or relieved surface, or a decorative plane or curved strip
used for ornamentation or finishing

mutule:

the modillion proper to the cornice in the Doric order; a projection upon the
soffit of the Doric corona

necking:

a small molding near the top of a column or pilaster

ogee:

a moulding consisting of a continuous double curve, convex above and concave
below; a cyma reversa

ovolo:

a rounded convex molding

pale:

one of the stakes of a palisade; picket

paling:

a fence of pales or pickets; wood for making pales; a pale or picket for a fence

pantiles:

roofing tiles transversely curved to an ogee shape, one curve being much larger
than the other; when laid on the roof the greater part of their surface forms a
concave channel for the descent of water, while one side forms a narrow convex
ridge, which overlaps the edge of the adjoining tile

pedestal:

the support or foot of a late classic or neoclassic column

pediment:

a triangular space forming the gable of a 2-pitched roof in classic architecture;
also a similar form used as a decoration

penciling:

lines of white or other color drawn along a mortar joint on a brick wall

peristyle:

a colonnade surrounding a building or court; also an open space enclosed by a
colonnade

picket:

a pointed or sharpened stake, post, or pale

pier:

a vertical structural support as in the wall between two openings, or a pillar or
pilaster, or a vertical member that supports the end of an arch or lintel

pilaster:

an upright architectural member that is rectangular in plan and is structurally a
pier but architecturally teated as a column and that usually projects a third of its
width or less from the wall

pillar:

a firm upright support for a superstructure, or an ornamental column or shaft,
often standing alone for a monument

perch:

a solid measure used for brick or stone containing a lineal perch in length (a
pole or rod) and one and one-half feet in breadth and one foot in thickness, but
greatly varying according to materials and locations

plinth:

the abacus of the capital of a column; also the uppermost projecting part of a
cornice or of a wall; also the lower square member of the base of a column or
pedestal; also the projecting part of a wall immediately above the ground

pump-stock:

the body of a pump

press:

a closet or cupboard

renge:

a sieve or strainer

setter:

a workman who lays stone or brick in a building

snatch block:

a block that can be opened on one side to receive the bight of a rope

soffit:

the under horizontal face of an architrave or overhanging cornice

stile:

one of the vertical members in a frame or panel into which the secondary
members are fitted

surbase:

a boarder or molding immediately above the base or lower paneling of a
wainscoted room; also a cornice or series of moldings above the dado of a
pedestal, podium, etc.

tine:

the tongue or clapper of a bell which strikes it on the inside and causes it to
sound

trace:

either of two straps, chains, or lines of a harness for attaching a horse to
something (as a vehicle) to be drawn

trimmer:

is a short beam framed across an opening to carry the ends of those joists which
cannot be extended across the opening of a stair-well or hearth; also, a brick-
trimmer

triglyph:

the fluted portion alternating with the recessed metopes on the frieze

valley:

the line at which two sloping roofs meet

venetian blind:

wooden shutter made of thin vertical slats of wood, for an external shield of windows or doors

volute:

a spiral or scroll-shaped form, or a spiral scroll-shaped ornament forming the
chief feature of the Ionic capital

wood brick:

a block of wood cut to the size and shape of a brick, inserted in the interior
walls of a building as a hold for joinery