 | University of Virginia record February, 1911 |  |
Drawing and Shop-Work.
Drawing: Mechanical and Projection Drawing:—Projections of
cubes, prisms, and pyramids in simple positions; method of revolving
the solid into new positions; method of changing the planes of projection;
projections of the three round bodies in simple positions and
in revolved positions; sections by planes parallel to the planes of projection;
sections by inclined planes; developments of prisms, pyramids,
cylinders, and cones; intersections of polyedra and curved surfaces;
distances from a point to a point or a plane or a line; angles between
planes and lines. (One unit).
Shop-Work: Wood-Work, Forging and Machine-Work:—The candidate
must present valid certificates covering at least 240 hours of competent
instruction with adequate appliances in these topics. About 80
hours should be devoted to wood-work, 40 to forging, and 120 to machine-work.
He should be familiar with the usual shop processes, the standard
methods of work, and the properties of the ordinary constructive materials.
(One unit).
In these units, which may be offered by students of engineering only,
a practical examination in drawing and in shop-work is given to validate
the certificate of training.
| University of Virginia record February, 1911 | |