The University of Virginia record :: February 1, 1934

[1] WILLIAM MYNN THORNTON, B.A., LL.D.	Emeritus Professor of Applied Mathematics
[1] FRANCIS PERRY DUNNINGTON, C.E., E.M.	Professor of Analytical and Industrial Chemistry (retired)
ROBERT MONTGOMERY BIRD, B.A., B.S., Ph.D.	Professor of Chemistry
WILLIAM HARRISON FAULKNER. M.A., Ph.D.	Professor of Germanic Languages
JOHN LLOYD NEWCOMB, B.A., C.E., Sc.D.	Professor of Civil Engineering
LLEWELLYN GRIFFITH HOXTON, B.S., B.A., M.A., Ph.D.	Professor of Physics
WALTER SHELDON RODMAN, M.S., S.M.	Professor of Electrical Engineering
TIPTON RAY SNAVELY, M.A., Ph.D.	Professor of Economics
WILBUR ARMISTEAD NELSON, B.S., M.A.	Corcoran Professor of Geology
GARDNER LLOYD CARTER, M.A., Ph.D.	Professor of Chemistry
ALBERT JULIUS BARLOW, B.A., C.P.A.	Professor of Commerce and Business Administration
W. PATTON GRAHAM, M.A.	Professor of Romanic Languages
JOSEPH KENT ROBERTS, M.A., Ph.D.	Professor of Geology
JOHN HOWE YOE, M.S., M.A., Ph.D.	Professor of Chemistry
ARTHUR FERGUSON BENTON, M.A., Ph.D.	Professor of Chemistry
EDWARDS WATTS SAUNDERS, Jr., C.E.	Professor of Applied Mathematics
ARTHUR FRANCIS MACCONOCHIE, B.Sc. (Engrg.) London	Professor of Mechanical Engineering
EARNEST JACKSON OGLESBY, M.A.	Professor of Engineering Mathematics
CHARLES WAKEFIELD PAUL	Associate Professor of Public Speaking
FREDERICK LYONS BROWN, M.A., Ph.D.	Associate Professor of Physics
JAMES SHANNON MILLER, Jr., B.S., B.A., E.E.	Associate Professor of Electrical Engineering
CHARLES HENDERSON, E.E.	Associate Professor of Experimental Engineering
CHARLES NEWTON HULVEY, M.S., LL.B.	Associate Professor of Commercial Law
LAUREN BLAKELY HITCHCOCK, S.M., Sc.D.	Associate Professor of Chemical Engineering
GEORGE WASHINGTON SPICER, B.A., Ph.D.	Associate Professor of Political Science
DUNCAN CLARK HYDE, M.A., Ph.D.	Associate Professor of Economics
FREDERIC TURNBULL WOOD, B.A., Ph.D.	Associate Professor of Germanic Philology
ORESTE RINETTI, Ph.D.	Associate Professor of Italian
HERMAN CARL HESSE, B.S., M.E.	Associate Professor of Engineering Drawing
ARTHUR AUGUST PEGAU, M.A., Ph.D.	Assistant Professor of Geology
FRANZ KARL MOHR, M.A., Dr.Jur.	Assistant Professor of Germanic Languages
HUGH MILLER SPENCER, B.A., M.S., Ph.D.	Assistant Professor of Chemistry
THADDEUS BRAXTON WOODY, M.A.	Assistant Professor of Spanish
FREDERICK TRACY MORSE, M.E., E.E.	Acting Assistant Professor of Mechanical Engineering

Service Fellows and Instructors

James Charles Alexander, B.S.	Chemistry
Richmond Thomas McGregor Bell, B.S., Ph.D. (Instructor)	Chemistry
James Webb Cole, Jr., B.S.Chem.	Chemistry
Thomas Bigelow Crumpler, M.S.	Chemistry
Richard Royston Fell, B.S.	Chemistry
Carl Keister Fink, B.S.Ch.E.	Chemistry
Elliott Guthrie Fishburne, B.S., LL.B. (Instructor)	Commercial Law
John Wilson Flowers, M.S.	Physics
Henry Louis Forbes, Jr., B.S.Ch.E.	Chemistry
Allan Talbot Gwathmey, B.S., S.B.	Chemistry
Frederick Taylor Holmes, B.A.	Physics
Frank Leland Howard, B.S.Com., M.S. (Instructor)	Cost Accounting
George Ephraim Hunsberger, M.A. (Research Fellow)	Economics
Fred Shank Palmer, B.S.Chem.	Chemistry
Whitfield Price, B.A.	Chemistry
Lawrence Reginald Quarles, B.S.E.	Physics and Electrical Engineering
Richard Wingfield Quarles, B.S.E.	Chemistry
John Joseph Smith, M.A.	Economics
William Monroe Spicer, B.S.	Chemistry
Alfred Herbert Stuart, B.S.	Chemistry
Joseph Lee Vaughan, M.A. (Instructor)	English
Matthew Volm (Instructor)	German

Assistants

Gordon Keith Carter	Freshman Applied Mathematics and Sophomore Engineering Mathematics
Ellis Conn	Experimental Engineering
Stanley Womack Dinwiddie	Chemistry
Stonewall Jackson Doswell, Jr.	Field-work and Freshman Engineering Mathematics
Howard Berryman Edwards	English and Freshman Engineering Mathematics
Tazewell Wayne Edwards, Jr., B.S.E.	Civil, Experimental and Mechanical Engineering
David Milton French	Chemistry
John Spencer Glunt	Field-work
Ashton Little Godley, B.S.E.	Railway Field, Sophomore and Senior Applied Mathematics
William Milligan Irvine, Jr.	Freshman Applied Mathematics
Marion Randolph Lytton, B.S.	Chemistry
Luther Samuel Miller, B.S.E.	Freshman Applied Mathematics and Experimental Engineering
William Seddon Cabell Nelson	Junior Applied Mathematics
Aubrey Edwin Palmer	Civil Engineering
William Walker Payne	Field-work and Freshman Engineering Mathematics
Thomas James Peterson, B.S.E., E.E.	Sophomore Engineering Mathematics, Junior and Senior Applied Mathematics
Charles Pleasants Roberts, B.S.	Chemistry
John Hunter Robinson	Mechanical Engineering
George Chester Seward, B.A.	Business Speaking
Chester Earl Stahl, B.S.E.	Electrical Laboratory
Stockton Graeme Turnbull, Jr.	Chemistry

ENTRANCE REQUIREMENTS

For admission to the Freshman Class in the Department of Engineering
the candidate must be at least sixteen years old. He must present a certificate
of honorable withdrawal from the school last attended, or other valid
proof of general good character. He must further satisfy the Dean of the
Department of Engineering as to his adequate preparation for the work by
passing the Entrance Examinations specified below or by the presentation
of equivalent certificates of preparation signed by an official of a recognized
institution of collegiate rank, or by the principal of an accredited public
high school or of an accredited private secondary school. An applicant for
admission from outside of Virginia may be required to supplement his application
by an interview with a representative of the University. The topics
required for entrance and their values in units are as follows, the unit being
one year's work on the subject in an accredited high school:

English A.—Grammar and Grammatical Analysis	1
English B.—Composition and Rhetoric	1
English C.—Critical study of Specimens of Literature	1
Mathematics A1.—Algebra to Quadratics	1
Mathematics A2.—Quadratics, Progressions, Binomial Formula	1
Mathematics B.—Plane Geometry	1
Mathematics C.—Solid Geometry	½
Mathematics D.—Plane Trigonometry	½
History.—Ancient; Medieval; English; American (any one)	1
Electives	7
Total	15

High school students who expect to study Engineering are advised to
include among their electives at least one Foreign Language (Latin or French
or German), one Science (Chemistry or Physics with adequate laboratory
work) and an additional unit of History. Other electives which may be
profitably offered are History of English and American Literature, Greek,
Botany, Zoölogy, Physical Geography.

A candidate may be admitted as a Conditioned Student in spite of some
deficiencies in required entrance subjects, provided these are not such as
will impair the integrity of his work, but he must submit not less than 15
units. No such candidate will be conditioned except upon subjects actually
taught in this University, nor will any candidate be conditioned on more than
2 units; and all conditions must be absolved before the beginning of the
next session after initial registration. Courses taken for the removal of entrance
conditions may in no case be counted as part of the work credited
for any degree. No conditions will be allowed in English A or B or in
Mathematics A1, A2, or B.

As the table of Entrance Requirements shows, the full High School
course in Mathematics is required for entrance to the Department of Engineering,
but unfortunately the graduates of the High Schools are often deficient
in Solid Geometry and Plane Trigonometry and can be admitted only
upon conditions in those subjects. High School principals are advised to urge
their graduates, with this status, to attend a Summer Session at the University
before entering the Department of Engineering so that these deficiencies
may be overcome. If the prospective student finds it impossible to attend
a Summer School previous to his regular matriculation, a course has
been planned which will allow him to make up his deficiencies by taking work
in the Summer School following his first year in Engineering. This course
provides for Trigonometry, Solid Geometry and College Algebra in the three
terms of the regular session, with the other work as outlined for the regular
student, and in addition, in the two terms of the Summer School, Analytical
and Coördinate Geometry are taken. Such a program will prepare the student
for Sophomore standing and will save him from the failure usually encountered
by students who attempt to make up the deficient work in regular
session in addition to the full course of required subjects.

A candidate may be admitted as a Special Student, without formal
examination, provided he is more than twenty years old if a Virginian and
not less than twenty-three years old if a non-Virginian, and gives evidence
of serious purpose and of fitness to pursue with profit the courses for which
he is registered. No special student may be a candidate for any degree. No
conditioned student may register later as a special student.

ADMISSION OF WOMEN

Women are admitted as candidates for the Engineering Degrees but not
as Special Students. A candidate must be at least twenty years old on the
birthday preceding matriculation; must present certificates showing graduation
from an accredited public high-school, or not less than four years' attendance
in an accredited private school, with credit for not less than 15 college
entrance units obtained at least two years before admission to the University;
and must in addition show by proper certificate the completion in
a standard college, subsequent to the credit obtained for 15 entrance-units,
of at least 30 session-hours (60 semester-hours), of courses of college grade,
in not less than eighteen calendar months.

ADVANCED STANDING

Under the elective system of the University of Virginia, a student who
has completed courses of college or university grade in other institutions of
learning on mathematical or scientific subjects may be excused from attendance
upon these courses by the Dean, with the advice and consent of the
professor in charge, and will then be registered for the more advanced work,
provided the full entrance requirements have been satisfied.

In order to secure College Credit upon such courses toward a degree in
Engineering from the University, the applicant must show—

1. That the courses offered are coextensive with the corresponding
courses as given in the University of Virginia.

2. That his grades on them were not below the 75 per cent. pass-mark
of this University.

Such credits may be granted by the faculty upon the recommendation of
the Dean and the professors in charge; but are automatically revoked by
the failure of the student to pass in the more advanced courses in the related
topics.

Advanced standing in the technical engineering subjects of higher grade
than those of the Sophomore year will not be given except to graduates of
other institutions offering technical engineering instruction and then only
upon special consideration of each application for such advanced standing.
No degree in Engineering will be awarded for less than one full year's work
in a regular session of this University and the work of a candidate's last
year must be performed in residence here.

The same rules apply to Credits on Summer School Courses; except that
for courses in the Summer School of this University the examination questions
must be prepared by the professor in charge of the regular course, and
the answers must be read and graded by him.

Students, suspended from other universities, are not granted college
credits on courses previously passed, except upon explicit recommendation
of the suspending university, and after such additional tests as this
Engineering Faculty may impose.

Credits on Practice-Courses, in Drawing, or Field-work may be granted
to applicants who have gained in professional practice the training which these
courses represent. Such applicants must file with the Dean proper certificates
from the official under whom the work was done and must in every
case pass an additional practical test on the subjects for which credit is
desired.

College credit is not granted for high-school work.

PROGRAMS OF STUDY

The candidate who has satisfied the requirements for entrance as above
defined is matriculated as a student of Engineering and admitted to the Freshman
Class. The studies of this class comprise lecture courses in English,
Mathematics, Applied Mathematics, and Chemistry with associated laboratory
courses in Chemistry, Drawing, and Field-work. All Freshmen have the
same courses except those majoring in Chemical Engineering, who pursue a
slightly different course in Chemistry for the second half-year.

For advancement to the Sophomore Class the student must have completed
at least two-thirds of his Freshman work. Upon entering this class
the students majoring in Mechanical Engineering begin their specialized work,
while all others except those in Chemical Engineering pursue identical courses
of study through the year. On entering the Junior year each student elects
his specialty. At this time the students of Mechanical Engineering must
choose either the power or the aeronautical option. The courses thereafter
diverge according to the major subject chosen by the student. Programs of
study for each degree are given below.

The courses are so ordered that the specified entrance requirements are
adequate for the work of the Freshman Year. Each succeeding year presupposes
the completion of the work for all the foregoing years. Students are
advised to adhere strictly to the regular programs. The arangements specified
in them have been carefully planned and are the best. Departures from the
curriculum will in almost every case produce conflicts in lecture hours or
laboratory periods and may cost the student a year's time. Haphazard election
is discouraged and in extreme cases will be prohibited. No student will
be registered for a course unless, in the opinion both of the Dean and of
the professor, his preliminary training has fitted him for the profitable pursuit
of that course.

Students are especially advised against the attempt to crowd too many
studies into their scheme of work, and are warned that admission to advanced
courses will be granted only to those who have adequate mathematical and
scientific training to profit by them. Men overloaded with work, too great in
volume or in difficulty for their powers, suffer inevitable discouragement
and incur almost certain failure.

Changes of classes with transfer of fees may be made, subject to the approval
of the Dean, within two weeks after the beginning of any term. Thereafter
such changes may be made only by special order of the faculty, and then
without transfer of fees.

Upon the completion of the four years' course as defined in any one of
the Programs of Study, the faculty will award to any student in regular and
honorable standing the degree of Bachelor of Science in Engineering. Upon
the completion of the additional Graduate Course in a satisfactory manner
the faculty will award the appropriate degree of Chemical Engineer, Civil
Engineer, Electrical Engineer, or Mechanical Engineer.

The five-year curriculum has been adopted at the University of Virginia
in view of the impressive and growing demand from practicing engineers and
industrial leaders that Schools of Engineering should enlarge the field of
study to embrace more of the humanities and better opportunities for student
research, to the end that the graduates may be better fitted to undertake their
duties as engineers and citizens.

COURSES OF INSTRUCTION

The Subjects of Instruction in Engineering are grouped into classes, each
designated by a distinctive number for each term, the lecture and laboratory
courses being likewise differentiated. This grouping follows the arrangement
shown below:

Humanities	1 to 99
Mathematics	100 to 199
Physics	200 to 299
Chemistry and Chemical Engineering	300 to 399
Geology	400 to 499
Applied Mathematics	500 to 599
Experimental Engineering	600 to 699
Civil Engineering including Field-work	700 to 799
Mechanical Enginering including Aeronautics	800 to 899
Electrical Engineering	900 to 999

Lecture courses are listed in the first fifty numbers of all classes; laboratory
or practice courses are listed in the second fifty numbers of all classes.
The same numbers are used in schedules of lecture hours, laboratory periods
and examination days.

HUMANITIES

1-2-3: English:

12:30-1:30, M. W. F.

2:30-5:30, M.

First term: Composition, with frequent themes and parallel reading in
scientific literature. Second term: The short report and letter writing.
Third term: The composition of technical papers with especial reference
to the long report. (Fall, Winter, Spring.)

Mr. Vaughan and Mr. H. B. Edwards.

7-8-9: Business Speaking:

Section I, 8:30-9:30, M. W. F.

Section II, 8:30-9:30, T. Th. S.

This course is intended to fit engineers for effective speaking in the
modern business world. It includes the principles of persuasive speaking,
various types of business talks, radio and telephone speaking, and a detailed

treatment of the personal conference. This training is required of all
Juniors. (Fall, Winter, Spring.)

Associate Professor Paul and Mr. Seward.

10-11-12: Economics:

10:30-11:30, M. W. F.

First and second terms: Survey of the principles of economics. Third term:
The bearing of these principles upon present American conditions. Instruction
will be given by lectures, assigned readings, reports, and discussions. (Fall,
Winter, Spring.)

Optional course, for all except Chemical Engineering students, in place of
which a 3-session-hour course in Modern Language (40-41-42), French, German,
Italian or Spanish may be chosen.

Professor Snavely, Associate Professor Hyde, Mr. Hunsberger and Mr.
J. J. Smith.

13-14-15: Commercial Law:

11:30-12:30, T. Th. S.

A detailed study of the fundamental and important, rather than the technical,
principles of those subjects of which knowledge is necessary in ordinary commercial
transactions. (Fall, Winter, Spring.) Optional for Government (16-17-18)
or History (31-32-33).

Associate Professor Hulvey and Mr. Fishburne.

16-17-18: Government:

9:30-10:30, T. Th. S.

A description and comparison of the principles and essential features of the
governments of the United States, England, France, Germany, and Switzerland,
with especial emphasis on the characteristics of the American Constitutional
system and the operation of Congressional government. (Fall, Winter, Spring.)
Optional for Commercial Law (13-14-15) or History (31-32-33).

Associate Professor Spicer.

21-22-23: Cost Accounting:

9:30-10:30, M. W. F.

First term: Theory and practice in General Accounting. Second and third
terms: Application of accounting principles to various types of manufacturing and
engineering enterprises. (Fall, Winter, Spring.)

Professor Barlow and Mr. Howard.

26: Engineering Economics and Specifications:

9:30-10:30, T. Th. S.

Lectures, parallel reading and written work dealing with the economic considerations
involved in engineering problems and specifications for engineering
structures. Special emphasis is placed upon the general problem of economic
selection of methods, machinery and apparatus in the several engineering fields.
Questions of first cost, depreciation, rates for service, etc., will be treated. Complete
specifications are required from each student, subjects being chosen particularly
from the special field of study of each individual student. (Spring.)

Acting Assistant Professor Morse.

31-32-33: History:

A college course in history to be chosen by the student and approved by
the Faculty of Engineering. (Fall, Winter, Spring.) Optional for Commercial
Law (13-14-15) or Government (16-17-18).

34-35-36: Elective:

A graduate-year humanistic course chosen from Philosophy, Architecture,
Fine Arts, or other subject approved by the Faculty of Engineering. (Fall,
Winter, Spring.)

40-41-42: Modern Language:

8:30-9:30 or 9:30-10:30 or 12:30-1:30,

M. T. W. Th. F.

A college credit course in modern language chosen between French, German,
Italian and Spanish and upon approval of the student's major-subject professor.
(Fall, Winter, Spring.) An optional course, for all except Chemical
Engineering students, which may be taken in place of Economics (10-11-12).
Chemical Engineering students are required to take German fr two years.

Professor Graham, Associate Professor Rinetti and Assistant Professors
Mohr and Woody.

43-44-45: German:

9:30-10:30, M. W. F.

A course in second-year German required of students in Chemical Engineering
in their Junior year. (Fall, Winter, Spring.)

Professor Faulkner, Associate Professor Wood and Assistant Professor
Mohr.

MATHEMATICS

100: Trigonometry:

8:30-10:30, T. Th. S.

A complete course in plane trigonometry is pursued with constant drill in the
solution of problems, equations, identities, and exercises in the use of logarithms.
(Fall.)

Professor Oglesby, Mr. Doswell, Mr. H. B. Edwards and Mr. Payne.

106: Analytical Geometry and College Algebra:

8:30-10:30, T. Th. S.

In this course Cartesian and polar coördinates are presented and applied to
the study of the straight line, the circle, the parabola and the ellipse. About
one-third of the time is spent on related topics in college algebra. (Winter.)

Professor Oglesby, Mr. Doswell, Mr. H. B. Edwards and Mr. Payne.

107: Analytical Geometry and College Algebra:

8:30-10:30, T. Th. S.

This course is a continuation of course 106. The topics studied are the
hyperbola, transformation of coördinates, the general equation of the second
degree, systems of conics, tangents and polars, and problems on loci. The study
of college algebra is continued. (Spring.)

Professor Oglesby, Mr. Doswell, Mr. H. B. Edwards and Mr. Payne.

108: Calculus:

11:30-12:30, M. W. F.

A first course in the differential calculus. The topics studied are limits,
differentiation of algebraic and transcendental functions, applications to geometry,
elementary kinematics and mechanical problems, parametric equations, polar
equations, differentials and curvature. (Fall.)

Professor Oglesby, Mr. Peterson and Mr. G. K. Carter.

109: Calculus:

11:30-12:30, M. W. F.

A first course in the integral calculus. A study of the process of integration
with applications. (Winter.)

Professor Oglesby, Mr. Peterson and Mr. G. K. Carter.

110: Calculus:

11:30-12:30, M. W. F.

The topics studied are the theorem of mean value and its applications, series,
expansions of functions, partial differentiation and multiple integrals. (Spring.)

Professor Oglesby, Mr. Peterson and Mr. G. K. Carter.

111: Differential Equations:

11:30-12:30, T. Th. S.

An elementary course in differential equations with particular reference to
the differential equations of electrical engineering. (Fall.)

Professor Oglesby.

158-159-160: Mathematics Laboratory:

2:30-5:30, T. Th.

This course is conducted in conjunction with 108-109-110. It consists of an
intensive, supervised study of calculus problems. (Fall, Winter, Spring.)

Professor Oglesby, Mr. Peterson and Mr. G. K. Carter.

PHYSICS

200-201-202: Sophomore Physics:

9:30-10:30, M. W. F.

250-251-252: Physics Laboratory:

9:30-11:30, T. Th. S.

An elementary course in general physics consisting of lectures, lecture
demonstrations, recitations and laboratory exercises. (Fall, Winter, Spring.)

Associate Professor Brown and Assistants.

259: Electrical Laboratory:

2:30-5:30, Th.

This course deals particularly with the more precise electrical measurements
and the manipulation of instruments of precision used in the higher grade of
electrical testing and standardization. (Winter.)

Professor Hoxton and Associate Professor Brown.

CHEMISTRY

300a-301a-302a: General Chemistry:

10:30-11:30, T. Th. S.

350a-351a-352a: Chemistry Laboratory:

11:30-1:30, T. Th. S.

The fundamental principles and phenomena of inorganic, organic, and physical
chemistry, and the foundations of analytical chemistry. Most of the time
is devoted to inorganic phenomena. For all engineering students except in
Chemical Engineering. (Fall, Winter, Spring.)

Professor Carter, Dr. Bell and Assistants.

300b-301b-302b: General Chemistry:

10:30-11:30, T. Th. S.

350b-351b-352b: Chemistry Laboratory:

11:30-1:30, T. Th. S.

For students applying for Bachelor of Science in Chemical Engineering.
First half session same as Chemistry 300a and 301a. Second half session

devoted to qualitative analysis and special topics in descriptive chemistry.
(Fall, Winter, Spring.)

Professor Carter, Dr. Bell and Assistants.

303-304-305: Chemical Principles:

8:30-9:30, T. Th. S.

353-354-355: Quantitative Analysis Laboratory:

2:30-5:30, M. W. F.

Chemistry 300b-301b-302b and 350b-351b-352b prerequisite.

Two hours of lecture per week are devoted to chemical principles, as an
intermediate course designed to bridge the gap between general chemistry and
physical chemistry, the principles touched upon during the first-year course are
restated and treated from a more advanced viewpoint.

The accompanying laboratory course is designed to introduce the theory
and practice of volumetric and gravimetric methods of analysis, including an
introduction to electroanalysis. Nine hours per week, including one demonstration
or recitation on the technique and theory of quantitative analysis.
(Fall, Winter, Spring.) (Required beginning session 1934-35.)

Professor Yoe and Assistant.

306-307-308: Analytical Chemistry:

8:30-9:30, T. Th. S.

356-357-358: Analytical Chemistry Laboratory:

2:30-5:30, T. Th.

Chemistry 300-1-2 prerequisite.

(a) Qualitative Analysis. First and second terms, 3 hours of lecture and
6 hours of laboratory per week, devoted to the study of systematic qualitative
analysis. (b) Quantitative Analysis. Third term, 2 hours of lecture and 9 hours
of laboratory per week, devoted to elementary quantitative analysis. In the lectures
and recitation work special emphasis is given to the theoretical foundations of
analytical chemistry. (Fall, Winter, Spring.) (Not given after 1933-34.)

Professor Yoe and Assistants.

309-310-311: Organic Chemistry:

11:30-12:30, T. Th. S.

359-360-361: Organic Chemistry Laboratory:

2:30-5:30, T. Th.

Chemistry 300b-1b-2b prerequisite.

An introduction to the study of the compounds of carbon, including the
application of modern chemical theory to such compounds and their reactions.
(Fall, Winter, Spring.)

Professor Bird and Assistants.

318-319-320: Quantitative Analysis:

Lecture by appointment

368-369-370: Quantitative Analysis Laboratory:

2:30-5:30, M. W.

Chemistry 306-7-8 prerequisite.

A course in the principles of quantitative analysis. The laboratory work will
include a study of characteristic procedures, illustrating gravimetric and volumetric
analysis. 1 hour of lecture and 6 hours of laboratory per week. (Fall, Winter,
Spring.) (Not given after 1934-35.)

Professor Yoe and Assistants.

321-322-323: Physical Chemistry:

12:30-1:30, M. W. F.

371-372-373: Physical Chemistry Laboratory:

2:30-5:30, T. Th.

Chemistry 303-4-5 or 306-7-8 prerequisite, as well as some knowledge of the Calculus
and previous training in Physics.

An introductory study of atomic structure theory, kinetic theory and the
principle of the conservation of energy form the foundations of the study of
gases, liquids, solids, solutions and rates of reaction. A brief study of the direction
of chemical change is then followed by the consideration of homogeneous and
heterogeneous equilibria. (Fall, Winter, Spring.)

Professor Benton, Assistant Professor Spencer and Assistant.

324-325-326: Principles of Chemical Engineering:

9:30-10:30, M. W. F.

Chemistry 321-22-23 prerequisite.

A course designed to give the prospective chemical engineer a thorough
foundation in the basic principles of his profession. Regularly taken in the fourth
year. The unit operations of chemical industry are studied from the standpoint
of the chemical and physical principles involved. Practice in the application of
these principles is given by the solution of numerous type problems in which
quantitative treatment is emphasized. Attention is first devoted to a detailed study
of flow of fluids and flow of heat, since these topics are fundamental in the subsequent
development of unit operations in Chemical Engineering. These subjects
are followed by evaporation, humidification, drying and distillation. Facility is
developed in the stoichiometry of chemical industry. Plant inspection trips are
made from time to time. Lectures and recitations, 3 hours a week. (Fall, Winter,
Spring.)

Textbook: Walker, Lewis and McAdams: Principles of Chemical Engineering;
McGraw-Hill Book Co., N. Y., 1927.

Associate Professor Hitchcock.

327-328-329: Advanced Chemical Engineering:

10:30-11:30, M. W. F.

Chemical Engineering 324-25-26 prerequisite.

Regularly taken in the graduate year by candidates for the Ch. E. degree.
The subjects of distillation and drying are treated in more detail than in the preliminary
course, while the additional subjects of filtration, absorption, and extraction
are taken up. Familiarity is gained with the applications of calculus to
the solutions of problems in these fields. Principles in the flow of fluids and flow
of heat are used in solving problems of more advanced character. Recent developments
in Chemical Engineering are studied. Lectures and recitations, 3
hours a week. (Fall, Winter, Spring.)

Textbook: Walker, Lewis and McAdams: Principles of Chemical Engineering.

Associate Professor Hitchcock.

340-341-342: Applied Chemistry:

8:30-9:30, M. W. F.

Chemistry 309-10-11 and 321-22-23 prerequisite.

The lectures and recitations in this course are devoted to the study of fundamental
principles underlying the more important phases of industrial chemistry,
including both theoretical and economic problems. A considerable amount of collateral

reading in descriptive industrial chemistry is assigned, and written reports
involving use of the literature are required. Better appreciation of the quantitative
relationships existing in the applications of chemistry is gained through problem
work paralleling the lecture material. A number of plant inspection trips are
arranged during the year. Lectures and recitations, 3 hours a week. (Fall,
Winter, Spring.)

Associate Professor Hitchcock.

374-375-376: Chemical Engineering Laboratory:

The student demonstrates to himself essential features of the unit operations
of chemical engineering, by constructing and testing with his own hands
suitable apparatus for the illustration of principles in the parallel classroom
work. Under minimum supervision, he plans, builds, and tests such equipment
as orifices and other measuring apparatus, fluid flow devices verifying
Fanning's equation, apparatus for determination of heat transfer coefficients
in the more common cases, model vacuum pan sufficient to demonstrate the
ordinary relationships of evaporation, and packed columns for the absorption
of gases in liquids.

The primary object of this course is to teach the student how to obtain
the data necessary for the interpretation of the unit operations in chemical
engineering. It is inevitable that at the same time, he gains a clearer understanding
of these operations, as well as facility in shopwork and the use of
his hands, the preparation of working drawings, and the reduction of his
results to writing in the form of an acceptable report. Whether the apparatus
is particularly efficient, or even practicable from a production standpoint,
is not regarded as important at this stage.

The students work in small groups in order to make better use of the
time, and the results obtained by each group are made available to all through
dependent problem work in the classroom. Six hours per week. (Fall, Winter,
Spring.) (This course will be required beginning 1936.)

Associate Professor Hitchcock.

383-384-385: Undergraduate Chemical Engineering Research:

Opportunity is afforded undergraduate students to obtain an introduction
to research methods in problems pertaining to chemical engineering. As a
rule the course is open to those who are taking the major portion of their
work in senior subjects, and who have had or are taking Chemical Engineering
324-325-326. A minimum of nine hours per week for one term is required
in the laboratory, and it is expected that normally the student will
continue the work through the entire session. (An elective course for those having
the time to apply to it.)

Associate Professor Hitchcock.

386-387-388: Chemical Engineering Research:

This course is designed for candidates for the Ch. E. degree and affords an
introduction to research methods. Fundamental problems are selected, whenever
possible, from the field of greatest interest to the student. The method of attack
is in general to reduce the selected problem to laboratory scale leading to the
collection of basic data susceptible of definite interpretation, rather than to attempt

investigations on commercial equipment which usually yield empirical results.
The use of the chemical literature as an aid in conducting investigations
prefaces ad accompanies the laboratory work, as well as practice in the mathematical
and graphical treatment of the data obtained.

The preparation and submission of a satisfactory thesis marks the completion
of this course, and is a partial fulfillment of the requirements for the Ch. E.
degree. Two copies of the thesis, typewritten on paper of prescribed quality and
size, and substantially bound, must be deposited in the office of the Dean of the
Department of Engineering not later than May 15 of the year in which it is expected
that the degree will be conferred. The back of the cover must bear the
title of the thesis and the writer's name, and the title page must bear the words:
A thesis presented to the Engineering Faculty of the University of Virginia in
candidacy for the degree of Chemical Engineer. (Fall, Winter, Spring.)

Associate Professor Hitchcock.

Advanced Courses: A number of advanced courses in Chemistry, not
listed above, are described in the catalogue of the College. When time permits,
students in Chemical Engineering, who are properly prepared, may take
such of these courses as are approved by the Faculty of Engineering.

The Chemical Journal Club will meet once a week (hour to be arranged)
for the critical review and discussion of various topics of interest in current
chemical literature and of such chemical researches as are in progress in the
University. All members of the teaching staff and advanced students in
chemistry are expected to participate in these meetings and to take part
in the discussions.

GEOLOGY

400-401-402: Engineering Geology:

8:30-9:30, M. W. F.

450-451-452: Field and Laboratory:

6 hours a week.

Fundamental principles of dynamical and structural geology for first term
with Professor Roberts; minerals and rocks for second term with Assistant Professor
Pegau; and building stones and ores for third term with Professor Nelson.
The laboratory work is devoted to the interpretation of topographic and structural
maps, the principal building stones and their mineral content and properties, field
trips, the use of the plane table in topographic mapping, and geologic mapping.

Professors Nelson, Roberts, Assistant Professor Pegau and Assistant.

APPLIED MATHEMATICS

521: Plane Surveying:

10:30-11:30, M. W. F.

Lecture course: Theory, uses, and adjustments of compass, level, transit,
and stadia. Special methods of land, city, topographic and mining surveys.
Survey computation and maps. (Fall or Spring.)

571: Field course: Practical use of chain and tape, level, compass,
transit and stadia. Field notes, records and reports. 6 hours a week.

Professor Saunders and Assistants.

522: Mechanical Drawing:

10:30-11:30, M. W. F.

Lecture course: Principles of lettering; use of instruments and drawing
equipment; geometric constructions; orthographic projection; sectional views
and commercial conventions; free-hand sketching; pictorial representation;
principles of dimensioning; detail and assembly drawings; commercial practice.
(Fall or Winter.)

572: Practice course: The students execute a series of drawings, applying
the principles acquired in the lecture course, in pencil and ink, on
paper and tracing cloth. 6 hours a week.

Associate Professor Hesse and Assistants.

523: Descriptive Geometry:

11:30-12:30, M. W. F. Winter

10:30-11:30, M. W. F. Spring

Lecture course: Orthographic projection; point, line and plane fundamentals;
intersections; developments and applications. (Winter or Spring.)

573: Practice course: The students execute a series of drawings, applying
the principles acquired in the lecture course to problems selected
from various branches of engineering. 6 hours a week.

Associate Professor Hesse and Assistants.

524: Graphical Statics:

10:30-11:30, T. Th. S.

Lecture course: Graphic composition and resolution of forces; centers
of gravity and moments of inertia; strain sheets for simple types of roof and
bridge trusses; beams under fixed and rolling loads; reservoir dams and retaining
walls; internal stresses and beam deflections. (Winter.)

574: Practice course: Each student executes a weekly plate 15″ × 20″
of problems based on the lectures. 6 hours a week.

Professor Saunders, Associate Professor Hesse and Mr. Peterson.

525: Structural Drawing:

10:30-11:30, T. Th. S.

Lecture course: Graphic analysis of steel and timber trusses for roofs
and bridges; of solid beams and plate girder bridges; and of reinforced concrete
slabs, girders, columns, and retaining walls. (Spring.)

575: Practice course: Design and detailed drawings of simple examples
of roofs and bridges, with complete computations for each structure. 6
hours a week.

Professor Saunders, Associate Professor Hesse and Mr. Peterson.

526: Elementary Mechanics:

12:30-1:30, T. Th. S.

Lecture course: Composition and resolution of forces; friction; problems
in equilibrium; rectilinear motion, circular motion, projectile motion.
(Spring.)

576: Practice course: Solution of weekly problems in mechanics by
graphical and analytical methods. 6 hours a week.

Associate Professor Miller and Mr. Godley.

527: Applied Mechanics:

10:30-11:30, T. Th. S.

Review of elementary mechanics; dynamics of a particle; moments of
inertia; revolving bodies; rolling bodies; theory of work and energy; collision
of elastic solids; dynamics of the Steam Engine.

Weekly problems are assigned for solution by graphical and analytical methods.
(Fall.)

Associate Professor Miller and Mr. Nelson.

528: Strength of Materials:

10:30-11:30, T. Th. S.

Fundamental laws of stress and strain; straining actions and stresses in
ties and struts, beams and shafts, reinforced concrete slabs and girders; deflections
in simple, restrained and continuous girders; columns under axial and eccentric
loads. Laboratory courses 661-2-3. (Winter.)

Associate Professor Miller and Mr. Godley.

529: Hydraulics:

9:30-10:30, T. Th. S.

Equilibrium of fluids, applied to the analysis and design of thin and thick
shells and pipes, dams and weirs. Motion of fluids and discharges from orifices,
weir notches, pipes, canals, and rivers. Principles of linear and angular
momentum with applications to the analysis and design of hydraulic motors and
pumps. Laboratory course 680. (Spring.)

Associate Professor Henderson and Mr. T. W. Edwards, Jr.

Laboratory studies in Strength of Materials and Hydraulics are given in the
Classes in Experimental Engineering.

530: Machine Design: (For Electrical Course.)

10:30-11:30, T. Th. S.

Lecture course: Materials and methods of Machine Design; friction,
lubrication, plain, roller and ball bearings; positive and friction clutches; belt,
rope and chain transmission; gearing and commercial speed reducers; riveted
and screw fastenings; fits; shafts; flywheels; machine frames. (Spring.)

580: Practice course: Application of principles studied in the lecture
course to problems of particular interest to the Electrical Engineer. Design,
re-design, selection and layout of equipment. 6 hours a week.

Associate Professor Hesse.

581: Engineering Design: (For Chemical Course)

6 hours a week.

Machine and structural elements; elementary graphic statics; applications
of mechanics to problems of power transmission, conveying and materials
handling. The course is planned to teach students to attack problems
of design in an orderly manner. The major portion of the work is individual,
and is done in the laboratory, with occasional lectures on design
and application. (Fall.)

Associate Professor Hesse.

EXPERIMENTAL ENGINEERING

Lectures are given to explain the origin and manufacture of materials, the
design and operation of equipment, methods of conducting the tests, and the

calculation of the desired results from the data taken in the laboratory. The
work is done principally in the laboratories where special emphasis is laid upon
(1) a thorough understanding of the problem to be undertaken, (2) accuracy in
carrying out the investigation, (3) the presentation of the results in a report which
must meet the standards of professional practice.

650: Road Materials Testing:

6 hours a week.

Standard tests of Portland cement. Samples of stone are tested for specific
gravity, absorption, cementing value, toughness, resistance to abrasion, and compressive
strength. Asphalts and tars are tested for specific gravity, penetration,
melting point, volatilization, viscosity, flash point, fixed carbon. (Winter.)

Associate Professor Henderson.

661: Structural Materials Testing:

5 hours a week.

Tests of cement, timber and metals. A course for Electrical and Mechanical
Engineers, similar to 662 and 663 but arranged so as to cover all of the
work in one term. (Winter.)

Associate Professor Henderson and Mr. Conn.

662: Structural Materials Testing:

5 hours a week.

Tests of sand; tests of fine and coarse aggregates; proportioning of concrete;
compression tests of concrete and mortar, with measurements of deformation; tests
of reinforced concrete beams; construction of forms for concrete. For Civil Engineers.
(Fall.)

Associate Professor Henderson.

663: Structural Materials Testing:

5 hours a week.

Continuation of Course 662. Tests of wires; tension, compression and torsion
tests of metals; tranverse tests of metals and timber; determination of the Modulus
of Elasticity of metals; autographic testing; impact tests of metals; fatigue tests;
hardness tests. For Civil Engineers. (Winter.)

Associate Professor Henderson and Mr. Conn.

670: Fuel and Oil Testing:

5 hours a week.

Standard methods of sampling coal; proximate analysis of coal; determination
of the heating value of coal by the bomb calorimeter, with a study of the cooling
correction; the heating value of gas by the Junker calorimeter; determination of
heating value of liquid fuels; determination of specific gravity, flash and boiling
points, chill point, viscosity, carbon residue, and emulsification value of oils. (Fall.)

Associate Professor Henderson and Mr. Conn.

680: Hydraulic Testing:

5 hours a week

The measurement of the flow of water by means of orifices and weir notches;
determination of the coefficient of friction for pipe and pipe elbows; study of a
piston water meter; tests of large and small Venturi meters; performance tests of
piston and centrifugal pumps; measurement of stream velocity and discharge by
means of current meter. (Spring.)

Associate Professor Henderson and Mr. T. W. Edwards, Jr.

690: Power Laboratory:

5 hours a week.

The calibration and adjustment of gauges; calibration of thermometers, planimeters,
pyrometers, and indicators; flue gas analysis; steam quality tests; valve
setting; determination of clearances; tests of steam boilers; tests of a steam engine.
For Mechanical and Chemical Engineers. (Winter.)

Associate Professor Henderson and Mr. T. W. Edwards, Jr.

691: Power Laboratory:

5 hours a week.

Continuation of Course 692. Complete tests of a gasoline engine; complete
tests of a steam engine; tests of a steam turbine with a study of methods of
correcting to standard conditions. The Power Test Code of the American Society
of Mechanical Engineers used. For Mechanical Engineers. (Fall.)

Associate Professor Henderson and Mr. L. S. Miller.

692: Power Laboratory:

5 hours a week.

Continuation of Course 690. Tests of an air compressor; tests of a blower;
complete tests of a centrifugal pump, and other assigned tests. For Mechanical
Engineers. (Spring.)

Associate Professor Henderson and Mr. L. S. Miller.

CIVIL ENGINEERING

701: Curves and Earthwork:

9:30-10:30, T. Th. S.

Lectures on simple circular, compound, reverse, transition and vertical curves.
The form of excavations and embankments, earthwork surveys, computation of
volumes, formation of embankments, computation of haul, cost of earthwork, blasting.
Practical problems covering work of lecture course. (Fall.)

Professor Newcomb and Mr. Palmer.

703: Highway Engineering:

11:30-12:30, T. Th. S.

A study of highway economics, administration, legislation and organization.
The principles of highway location, surveying, mapping and design. The construction,
maintenance and characteristics of earth, sand-clay, gravel, and broken stone
roads. A study of bituminous materials. The construction, maintenance and
characteristics of bituminous macadam, bituminous concrete, asphalt, cement-concrete,
wood block, brick and stone block pavements. Sidewalks, curbs and gutters.
(Winter.)

Professor Saunders.

705: Bridge Engineering:

10:30-11:30, M. W. F.

A study of bridge stresses, the design and construction of selected types of
steel bridges. (Winter.)

Professor Saunders.

707: Water Supply and Sewerage:

11:30-12:30, T. Th. S.

A study of the quality, sources, collection, conveyance, purification and distribution
of city water supplies; the drainage of houses and streets, the collection
and conveyance of sewage, the disposal of sewage, the construction and maintenance

of works. (Spring.) (Beginning with session 1934-35 two terms will be
devoted to this study. Courses 708 and 709. Fall and Spring.)

Professor Saunders.

715: Materials of Construction:

10:30-11:30, T. Th. S.

A descriptive study of the properties, characteristics and manufacture of the
materials used in engineering structures. Problems in estimating quantities and
costs. (Fall.)

Associate Professor Henderson and Mr. Peterson.

718: Masonry Structures:

10:30-11:30, M. W. F.

A study of the theory of reinforced concrete design. The design and construction
of selected types of masonry structures. Practical exercises in design
together with structural drawing. (Spring.)

Professor Saunders.

720: Structural Engineering:

9:30-10:30, M. W. F.

An advanced course in the design and construction of engineering structures
of steel and masonry. The student will be required to design, detail and prepare
completed drawings of selected structures. (Fall.)

Professor Saunders.

721: Design of Water Supply and Sewerage Systems:

9:30-10:30, M. W. F.

The design, construction and operation of water supply and sewage systems.
The student will be required to make complete designs and prepare all necessary
plans and specifications. (Fall.)

Professor Saunders.

722: Sanitary Engineering:

9:30-10:30, M. W. F.

A study of water purification and sewage disposal. The design, construction
and operation of water purification works, and sewage disposal plants. The student
will be required to make complete designs and prepare all necessary plans
and specifications. (Winter.)

Professor Saunders.

723: Structural Engineering:

9:30-10:30, M. W. F.

Continuation of course 720. (Winter.)

Professor Saunders.

725: Civil Engineering Research:

This course will be devoted to intensive study and research planned to accord
with the student's individual choice of major topic of study in the graduate year.
(Spring.)

Professor Saunders.

PRACTICE COURSES

751: Railroad Surveying:

9 hours a week.

This course supplements 701, Curves and Earthwork. The class is divided into
squads, each squad making complete surveys, maps, profiles, and estimates for a
mile of located line. (Fall.)

Professor Saunders and Mr. Godley.

755: Bridge Drafting:

12 hours a week.

This course accompanies 705, Bridges. Each student is required to make
complete design and detail drawings of one plate girder and one selected type of
bridge truss. (Winter.)

Professor Saunders, Associate Professor Hesse and Mr. Palmer.

MECHANICAL ENGINEERING

800: Elementary Thermodynamics:

12:30-1:30, T. Th. S.

Physical units and their measurement. Properties of the permanent gases,
of steam, ammonia, and carbon dioxide. Laws of thermodynamics. Fuels and
combustion. The transformation of heat into mechanical work and the production
of cold. The generation of steam. (Fall.)

Acting Assistant Professor Morse and Mr. J. H. Robinson.

801: Elementary Applied Thermodynamics:

12:30-1:30, T. Th. S.

An introduction to the design and performance of stokers, boilers, and boiler
auxiliaries, steam engines and turbines, internal combustion engines, and refrigerating
plants. (Winter.)

Acting Assistant Professor Morse and Mr. J. H. Robinson.

802: General Thermodynamics:

11:30-12:30, M. W. F.

Energy transformations. Laws of thermodynamics. Changes of state.
Entropy and availability. Thermodynamic properties of gases and vapors.
Power cycles for gases and vapors. Refrigeration cycles for gases and
vapors. Fluids in motion. Thermodynamics of the steam engine, steam
turbine, and Diesel engine. Theory of the combustion of fuels. (Fall.)

Acting Assistant Professor Morse.

803: Power Plants:

11:30-12:30, M. W. F.

Factors affecting location and design of power plants. Economics of
power production. Costs and rate making. The Diesel plant. Hydro stations.
Cycles and heat balances of the Rankine, regenerative, reheating,
and binary vapor types of power plants. (Winter.)

Acting Assistant Professor Morse.

804: Heating, Ventilation, and Refrigeration:

11:30-12:30, M. W. F.

Principles of the heating and ventilation of factories, offices, and other public
buildings. Air conditioning and humidifying. The manufacture of ice and solid
carbon dioxide. The storage and transportation of perishables. The production
of very low temperatures. (Spring.)

Professor Macconochie.

805: Steam Generators:

12:30-1:30, M. W. F.

Modern boiler design and fuel burning equipment. Economic considerations
governing plant location and capacity. The use of high-pressure steam. Boiler
corrosion and boiler plant embrittlement. Control of smoke and dust, and ordinances
pertaining thereto. By courtesy of the Virginia Public Service Company

students have access to the Bremo Bluff generating station on the James River.
(Fall.)

Professor Macconochie.

806: Steam Turbines:

12:30-1:30, M. W. F.

Types of modern steam turbines and their application to land and marine
practice. The economy of the isolated station versus purchased power. Nozzle
flow and results of research on the properties of steam. Opportunities will be
offered for the study of industrial power plants and for keeping in touch with
current development in the power field. (Winter.)

Professor Macconochie.

807: Diesel Engines

12:30-1:30, M. W. F.

Design and performance of modern Diesel engines. Their application to industrial,
marine, and locomotive service. Fuel injection and combustion. The
gas turbine. (Spring.)

Professor Macconochie.

808: Steam Power Plants:

11:30-12:30, M. W. F.

Study of the steam boiler-turbine-condenser unit. Functional relationship
of steam plant equipment. Heat transfer computations. Combustion
and combustion equipment. Feedwater heating and treatment. Pumping
problems. Selection of piping. Piping systems. Electrical equipment and
layout. Instruments and meters. (Spring.)

Acting Assistant Professor Morse.

811: Machine Design:

12:30-1:30, T. Th. S.

The application of basic principles to the design of simple machine elements.
Toothed wheels. Screw and worm gearing. Cams. Transmission systems. (Fall.)

Associate Professor Hesse.

812: Theory of Machines:

11:30-12:30, M. W. F.

Kinematic chains and linkages. Simple machines. Mechanisms possessing
some particular geometrical property. Higher and lower pairs. Velocities and
accelerations in mechanisms. (Fall.)

Professor Macconochie.

813: Metallurgy:

11:30-12:30, M. W. F.

The extraction of metals from their ores, with special reference to the manufacture
of iron and steel. The theory of alloys. Heat treatment of metallic bodies.
Corrosion and its prevention. Measurement of temperature in industrial operations.
Testing and inspection of metallurgical products. (Winter.)

Professor Macconochie.

815: Elementary Mechanical Technology:

2:30-3:30, W.

An introduction to preparatory and manipulative processes. The production
of castings. Machining, forging, rolling, stamping, and wire drawing. The elements
of welding. (Fall, Winter, Spring.)

Professor Macconochie, Associate Professor Hesse and Mr. T. W. Edwards,
Jr.

820: Mechanism:

9:30-10:30, M. W. F.

A study of the action and design of selected machines. (Fall.)

Professor Macconochie.

821: Mechanics of Machinery:

9:30-10:30, M. W. F.

Dynamics of rotating bodies. Critical speeds and vibrations. Balancing.
(Winter.)

Professor Macconochie.

822: Engineering and Industrial Processes:

9:30-10:30, M. W. F.

A study of the technique of industrial operations as afforded by local industries,
e. g., textiles, silk, furniture, velvet, electric ranges, etc. Considerations governing
plant location. Community surveys. (Spring.)

Professor Macconochie.

826: Industrial Management:

10:30-11:30, M. W. F.

Organization and location. Layout, design and construction. Transportation.
Heating and ventilation. Standardization. Fatigue. Human relations. Operation
studies. Wage plans and incentives. Budgeting and purchasing. Inspection
and production control. Costs. (Fall.)

Professor Macconochie.

827: Industrial Management:

10:30-11:30, M. W. F.

This is a continuation of 826, developing a broader emphasis in the field of
industrial planning, problems of unemployment and the influence of industrial economics
on the growth of social well-being. (Winter.)

Professor Macconochie.

830: General Aeronautics:

10:30-11:30, M. W. F.

An introductory course including a brief history of the subject; a complete
nomenclature and explanation of the various parts of both heavier-than-air and
lighter-than-air craft; theory of flight; use of the controls; construction; stability;
engine development and present design; future possibilities; civil and military
aviation; Department of Commerce Rules and Regulations. (Winter.)

Acting Assistant Professor Morse.

833: Aerodynamics:

9:30-10:30, M. W. F.

Aerodynamic theory involving consideration of circulatory and vortex
flow. Induction and its effects. Theory of wing sections; of complete wings.
Application of wing theory to multiplanes, propellers, ground effect, etc.
Mechanics of airplane stability and control. (Fall.)

Acting Assistant Professor Morse.

834: Airplane Structures:

9:30-10:30, M. W. F.

Typical airplane structures. Layout to satisfy assumed performance
requirements. Determination of center of gravity. Preliminary performance
calculations. Study of airworthiness requirements of the U. S. Department
of Commerce, establishing critical loading conditions. Analysis of

forces in truss structures. Design of spars, torque tubes, struts, and ties.
(Winter.)

Acting Assistant Professor Morse.

835: Airplane Structures (Concluded):

9:30-10:30, M. W. F.

Materials employed in construction of airplanes; their characteristics and
uses. Combined stresses. Statically indeterminate structures. Fused, brazed,
glued, riveted, and bolted connections. Design of fittings and joints.
(Spring.)

Acting Assistant Professor Morse.

836: Airplane Design:

8:30-9:30, M. W. F.

Continuation of design begun in course 834. Three-view layouts with
details. Power plant selection and installation. Technique of experimental
methods of checking designs. The student completes design drawings of a
plane designed to give specified performance in the degree of completeness
as required by the airworthiness requirements for aircraft of the U. S. Department
of Commerce. (Spring.)

Acting Assistant Professor Morse.

860: Engineering Drawing:

6 hours a week.

Design of simple elements of machines such as screws, bolts, nuts, keys and
cottered joints, riveted joints and connections, pipes and pipe joints, shafts and
shaft couplings, clutches, bearings and supports, thrust blocks, engine details.
(Fall.)

Associate Professor Hesse.

863: Metallography of Iron and Steel:

3 hours a week.

This is a practice course involving the study of the structure of pure metals,
of cast iron, wrought iron and steel. Thermal critical points, their cause and
effects. Hardening and tempering. Annealing and case hardening processes.
Special and alloy steels. (Winter.)

Professor Macconochie.

867-868: Engineering Design:

6 hours a week.

In this course the student will be offered an opportunity of preparing an
original design of a machine tool, pump, or other device to required specifications.
(Fall and Spring.)

Associate Professor Hesse.

PLANT INSPECTION

Senior students in Mechanical Engineering are required to make a three-day
inspection trip to the Tidewater area of Virginia (or other selected region)
for the purpose of visiting the Langley Memorial Aeronautical Laboratory, the
Newport News Shipbuilding and Dry Dock Co., the Norfolk Navy Yard, the
James River Bridge, and the Reeves Avenue Power Station. This is usually
organized during the Spring Term.

Professor Macconochie.

ELECTRICAL ENGINEERING

900: Elements of Electrical Engineering:

11:30-12:30, M. W. F.

Lectures treating fundamental principles of Electrical Engineering; basic
ideas and fundamental units discussed; magnetic circuits and continuous electric
currents treated in detail; electromagnetism carefully studied. Special attention
is given to the physical conceptions involved, and numerous assigned problems
exemplify and broaden the theoretical discussions. 3 hours per week of
supervised problem work. (Fall.)

Professor Rodman and Mr. L. R. Quarles.

901: Direct Current Machines:

11:30-12:30, M. W. F.

Lectures on the theory, construction, characteristics, and operation of direct
current generators and motors and the necessary apparatus required for the
proper management and control of these machines. The principles of testing such
machines are carefully discussed. Problems illustrating the methods of calculation
involved in continuous current circuits and practical examples from standard engineering
practice form an important part of the work. 3 hours per week of supervised
problem work. (Winter.)

Professor Rodman and Mr. L. R. Quarles.

902: Periodic Currents:

11:30-12:30, M. W. F.

Lectures on electrostatic phenomena, variable currents, alternating currents,
and alternating current circuits, both single and polyphase. A careful study is
made of circuits with periodic currents and their characteristics when resistance,
inductive reactance and capacity reactance are present in their various combinations.
Extensive problem work is required to facilitate the treatment of simple
and complex circuits. 3 hours of supervised problem work per week. (Spring.)

Professor Rodman and Mr. L. R. Quarles.

903: Alternating Current Machinery:

10:30-11:30, M. W. F.

Lectures on balanced and unbalanced polyphase circuits and power measurements
followed by the treatment of theory, construction, characteristics, and operation
of synchronous alternating current generators. The principles of testing such
apparatus under various conditions of loading are discussed, and assigned problem
work illustrates the theory and practice. 3 hours per week of supervised problem
work. (Fall.)

Professor Rodman and Mr. L. R. Quarles.

904: Alternating Current Machinery:

10:30-11:30, M. W. F.

This course is a continuation of 903. The lectures treat more particularly
transformers, synchronous motors and parallel operation of alternating current
generators. Methods of testing are outlined and graphical methods of calculation
and predetermination of operating characteristics are discussed. Problems taken
from engineering practice serve to broaden and fix the theoretical deductions. 3
hours per week of supervised problem work. (Winter.)

Professor Rodman and Mr. L. R. Quarles.

905: Alternating Current Machinery:

10:30-11:30, M. W. F.

This course is a continuation of 903-4. Lectures deal with the theory, construction
and operation of rotary converters, induction, series, and repulsion
motors. Problems are solved to clarify the theory. 3 hours of supervised problem
work per week. (Spring.)

Professor Rodman and Mr. L. R. Quarles.

906: Illumination and Photometry:

11:30-12:30, T. Th. S.

Lectures on light, its physical properties; illuminants and their characteristics;
shades and reflectors; photometry, standards and apparatus; illumination calculations
for point and surface sources; principles of interior, exterior, decorative, and
scenic illumination. Problems illustrating computations necessary for the consideration
of the Illuminating Engineer are assigned. (Winter.) Optional for
Electronics (920), or Electric Traction (907), only one given in any year.

Professor Rodman.

907: Electric Traction:

11:30-12:30, T. Th. S.

Lectures on the various types of electric motors for traction purposes, controllers
and systems of control, brakes, rolling stock, track, train performance,
and electric railway economics. A discussion with problems of the complete
electrification system for electric railways, including generating apparatus, transmission,
sub-stations and equipment, distribution, and utilization of electrical energy
for car propulsion. (Winter.) Optional for Electronics (920), or Illumination
and Photometry (906-956), only one given in any year.

Professor Rodman.

910: Direct Current Systems:

9:30-10:30, T. Th. S.

Lectures dealing with the fundamentals of electrical circuits and direct current
machinery. Problem work accompanies the lectures. The course is essentially
for the non-electrical engineering students. (Fall.)

Professor Rodman and Mr. L. R. Quarles.

911: Alternating Current Systems:

9:30-10:30, T. Th. S.

Lectures covering the fundamentals of alternating current circuits and machinery.
Brief expositions of the subjects of electric lighting and power fundamentals.
For non-electrical engineering students. (Winter.)

Professor Rodman and Mr. L. R. Quarles.

916-917-918: Advanced Alternating Current Machinery:

10:30-11:30, T. Th. S.

A more detailed study of advanced character dealing with alternating current
machinery under abnormal conditions of service with attention to the more
refined problems involved. Optional for Electrical Communication (940-941-942),
only one given in any year. (Fall, Winter, Spring.)

Professor Rodman.

920: Electronics:

11:30-12:30, T. Th. S.

A course of lectures dealing with the general subject of electronics, its developments
and applications. (Winter.) Optional for Illumination and Photometry
(906-956), or Electric Traction (907), only one given in any year.

Professor Rodman.

925: Electric Transients:

12:30-1:30, T. Th. S.

A course dealing with transients as they are encountered in varied electric
circuits with both lumped and distributed constants; an introduction to the operational
method as applied to electric circuit theory. (Fall.)

Associate Professor Miller.

930-931-932: Electric Power Transmission:

9:30-10:30, T. Th. S.

A study of the problems involved in modern electric power transmission.
Treating the inductance and capacity of lines, aerial and underground; corona;
steady state solutions for short and long lines; consideration of stability power
limits and factors entering into the operation of complete power systems. (Fall,
Winter, Spring.)

Associate Professor Miller.

940-941-942: Electrical Communication:

10:30-11:30, T. Th. S.

A course dealing with the general subject of electrical communication of
intelligence by wire and wireless telegraph and telephone with emphasis on the
theoretical details of the subject. Treatment of the various mechanisms and
circuits utilized with particular reference to the vacuum tube engineering. (Fall,
Winter, Spring.) Optional with Advanced A. C. Machinery (916-917-918), only
one given in any year.

Professor Rodman.

LABORATORY COURSES

950-951: Direct Current Laboratory:

5 hours a week.

This course supplements 900-1. The laboratory work is devoted to a study
of electrical instruments, their use and manipulation; simple electrical circuits
and study of direct current apparatus and its operation; characteristics of generators
and motors. (Winter, Spring.)

Associate Professor Miller and Mr. Stahl.

953-954-955: Alternating Current Laboratory:

5 hours a week.

This course supplements 902-3-4-5, dealing with measuring instruments for
alternating current circuits; series and parallel circuits and their characteristics;
polyphase circuits, balanced and unbalanced; and alternating current generator,
motor and transformer characteristics. (Fall, Winter, Spring.)

Associate Professor Miller and Mr. Stahl.

956: Photometric Laboratory.

2 hours a week.

This course accompanies 906. Photometric tests are made upon different
types of incandescent lamps. The operating characteristics of incandescent and
arc lamps are studied. Tests of illumination, interior and exterior, are carried
out. Study of photometric standards and devices. (Winter.)

Associate Professor Miller.

960-961: Electrical Laboratory:

5 hours a week.

This course supplements 910-11. The work of the first term is devoted to
direct current tests; the second term exercises are on alternating current circuits
and machines. (Winter, Spring.)

Associate Professor Miller and Mr. Stahl.

966-967-968: Advanced Electrical Machinery Laboratory:

4 hours a week.

This course supplements 916-17-18. Special tests are carried out with emphasis
upon original work by the student. (Fall, Winter, Spring.)

Professor Rodman and Associate Professor Miller.

975: Transient Laboratory:

4 hours a week.

A course supplementing 925. It deals largely with oscillographic study of
illustrative transient circuit phenomena of varied types. (Fall.)

Associate Professor Miller.

980-981: Electric Power Transmission Laboratory:

4 hours a week.

A course supplementing 930-1-2 and dealing with certain phenomena encountered
in transmission circuits as they may be subjected to test on artificial
lines. (Winter, Spring.)

Associate Professor Miller.

990-991-992: Electrical Communication Laboratory:

4 hours a week.

A course supplementing 940-1-2 and devoted to various special tests of communication
circuits and apparatus. (Fall, Winter, Spring.)

Professor Rodman and Associate Professor Miller.

SUMMER SCHOOL

In the Summer School at the University of Virginia it has been possible
for some time to procure many of the non-technical courses required in the
engineering curricula, such as Chemistry, Physics, Commercial Law, Economics
and the Modern Languages. In the Summer School of 1934 there
will be given the following courses as they are given in the regular session:
Mathematics 100-106-107 and 108-109-110 with 158-159-160. In addition at
least two courses in Mechanics will again be offered from the three 526,
527 and 528. If there be a sufficient demand Mechanical Drawing, 522-572,
and Descriptive Geometry, 523-573, will be given.

STUDENT BRANCHES OF NATIONAL PROFESSIONAL
SOCIETIES

There have been established at the University of Virginia Student
Branches of the American Institute of Electrical Engineers (1912), the American
Society of Civil Engineers (1921) and the American Society of Mechanical
Engineers (1922). These societies hold regular meetings for the
discussion of periodical literature and the exposition by resident and visiting
engineers of the present-day problems in Engineering. A valuable feature
of the meetings is the opportunity presented for practice in public speaking
and debate. At stated meetings the Branches hold joint sessions for the discussion
of mutually interesting questions. A local society for students of
Chemical Engineering was organized in 1929.

TAU BETA PI

In May, 1921, a chapter of the National Honorary Engineering Fraternity
Tau Beta Pi was granted and the Alpha of Virginia Chapter of Tau

Beta Pi will henceforth serve to further inspire high scholarship and integrity.
This fraternity is recognized as the leading honorary engineering fraternity
of this country and its chapters are found in a limited number of engineering
schools of the highest standing. The members are elected with care and the
standards maintained are rigid both in respect to scholarship and character.

THETA TAU

In June, 1923, a chapter of the National Engineering Fraternity of Theta
Tau was granted at the University of Virginia. This fraternity has chapters
in a score or more of the leading engineering schools of the country and membership
is eagerly sought and greatly appreciated by the members of the student
body. Elections are made each year based on scholarship and general
record of ability and promise of future service to the profession of engineering.

TRIGON SOCIETY

The Trigon Engineering Society was founded at the University of Virginia
early in the spring of 1923. It is a local organization which has for its
object the broadening of the education of the engineering student by fraternal
and social contact and by encouraging lectures and study on subjects aside
from those dealing primarily with engineering. The society is active in the
student affairs of the department and is always ready to help in any undertaking
for the betterment of the Engineering School. Members are selected
for their personality, sociability, and promise of high engineering attainment.

ALPHA CHI SIGMA

On May 27, 1922, a charter was granted at the University of Virginia,
creating the Alpha Kappa chapter of the National Chemical Fraternity of
Alpha Chi Sigma. This fraternity recognizes high scholarship, character,
and seriousness of purpose in students specializing in chemistry and chemical
engineering. As the leading national fraternity in this field, it has 47 active
college chapters, 10 professional chapters, and 6 professional groups, serving
to advance chemistry and chemical engineering both scientifically and professionally.
Among the regular activities of the local chapter are the sponsoring
of the annual Alpha Chi Sigma lecture, the award of a membership
in the American Chemical Society to the outstanding student in chemistry
and chemical engineering, and general assistance to the faculty in the conduct
of official functions.

JONES AND BARKSDALE MEMORIAL FUNDS

A gift to the Department of Engineering from Messrs. Arthur P. Jones,
William Barham Jones (B.A. 1907) and Major Kenneth S. Jones (B.A.,
LL.B., C. E. 1915, Major U. S. A., Engineer Corps) in memory of their
father, the late Walter H. Jones, of Norfolk, Va., and of his deep interest
in the University of Virginia, in the form of an endowment fund has made
it possible to provide a considerable number of professional periodicals representing

the various engineering activities. A gift to the Department of Engineering
from Mrs. Hamilton Barksdale in memory of her husband, an alumnus
of the Engineering Department, specifically donated for the purpose of
building up the department library, has made possible much needed changes
and additions to the library.

ENGINEERING CURRICULUM, 1934-1935

	Freshman All courses	Sophomore All except Chemical	Sophomore Chemical
	[2] English 1-2-3	[2] Calculus 108-9-10	German 40-1-2
	[2] Math. 100-106-107	[2] Physics 200-1-2	[2] Calculus 108-9-10
	[2] Chem. 300a-1a-2a or 300b-1b-2b	Engrg. 800-801-526 or	[2] Physics 200-1-2
	[2] Ap. Math. 521-2-3	Engrg. 811 with 860-830-526 (for M. E. only)	[2] Chemical Principles 303-4-5
	[2] Field-work 571
	El. Mech. Tech. 815	Com. Law. 13-14-15 or
		Govt. 16-17-18 or
		Hist. 31-32-33
		L. F. $15
	L. F. $45	for M. E. $20	L. F. $40
	Junior	Senior	Graduate
Chemical	Business Speaking 7-8-9	Chem. Engrg. 324-5-6	Cost. Acct. 21-2-3
	[2] Quan. Anal. 318-19-20	[2] Org. Chem. 309-10-11	Ad. Chem. Engrg. 327-8-9
	[2] Phys. Chem. 321-22-23	[2] Elec. Sys. 910-11	Ap. Chem. 340-1-2
	German 43-4-5	Ap. Math. 715-x-529	Engrg. Econs. and Spec. 26
	Engrg. 800-801-526	[2] Exp. Engrg. 690-680	Elective 34-5-6
		[2] Design 581	[2] Chem. Engrg. Research
			386-7-8
	L. F. $50	L. F. $50	L. F. $25
Civil	Business Speaking 7-8-9	Cost. Acct. 21-2-3	[2] Eng. Geol. 400-1-2
	Ap. Math. 527-[2] 4-[2] 5	Ap. Math. 715-528-x	[2] Elec. Sys. 910-11
	C. E. 701-3-529	[2] Exp. Engrg. 662-3-80	Engrg. Econs. and Spec. 26
	[2] Exp. Engrg. 650	C. E. 708-9-5-18	Elective 34-5-6
	Econs. 10-11-12 or	[2] Bridge Drafting 755	Option: C. E. 720-23 or
	Mod. Lang. 40-1-2		C. E. 721-22
	Ry. Field-work 751		C. E. Research 725
	L. F. $25	L. F. $25	L. F. $15
Electrical	Business Speaking 7-8-9	Cost Acct. 21-2-3	E. E. [2] 930-[2] 1-2
	Ap. Math. 527-[2] 4-[2] 30	Ap. Math. 715-528-529	Option: E. E. [2] 906
	[2] E. E. 900-1-2	[2] Exp. Engrg. 670-61-80	or 920 or 907
	Math. 111	[2] E. E. 903-4-5	Engrg. Econs. and Spec. 26
	[2] E. E. Lab. 950-1-259	[2] E. E. Lab. 953-4-5	[2] E. E. 925
	Econs. 10-11-12 or		Option: [2] E. E. 916-17-18
	Mod. Lang. 40-1-2		or [2] E. E. 940-1-2
			Elective 34-5-6
	L. F. $20	L. F. $30	L. F. $35
Mechanical	Business Speaking 7-8-9	Aeronautics 833-4-5 or	M. E. 805-6-7
	[2] Ap. Math. 527-[2] 4-[2] 5	Cost. Acct. 21-2-3	M. E. 820-21-22
	M. E. 802-3-8	Ap. Math. 715-528-529	M. E. 826-27
	[2] Exp. Engrg. 670-690-92	Exp. Engrg. 691-61-80	Engrg. Econs. and Spec. 26
	Econs. 10-11-12 or	M. E. 812-[2] 13-4 or 836	Elective 34-5-6
	Mod. Lang. 40-1-2 or	[2] Elec. Sys. 910-11
	Cost Acct. 21-2-3	M. E. Design 867-8
	L. F. $25	L. F. $40	L. F. $00

[2]

Starred courses involve laboratory work or quiz or supervised problem work.

L. F.—Laboratory Fees.

SCHEDULE OF FOUR-YEAR COURSES

CLASSES					LECTURES		LABORATORY
C—lectures per wk. S-H—session hours.
L—hrs. of practice per wk.		C	L	S-H	M. W. F.	T. Th. S.
Freshman	English (1-2-3)	3	3	4½	12:30-1:30		2:30-5:30, M
	Math. (100-106-107)	3	3	4½		9:30-10:30	8:30-9:30, T. Th. S.
	Gen. Chem. (300-301-302) a or b	3	6	6		10:30-11:30	11:30-1:30, T. Th. S.
	Ap. Math. (521-522-523)	3	6	6	10:30-11:30		8:30-10:30, M. W. F.
	El. Mech. Technology (815) F. W. S.	1		1	2:30-3:30, W.
	Field-work (571)						6 h. a. w. Fall or Spring
Sophomore	Com. Law (13-14-15) or Govt. (16-17-18)	3		3		11:30 or 9:30
	or History (31-32-33)	3		3		11:30-12:30
	German (40-41-42) M. T. W. Th. F.	5		3	12:30-1:30	12:30-1:30
	Math. (108-109-110)	3	6	6	11:30-12:30		2:30-5:30, T. Th.
	Physics (200-201-202)	3	6	6	9:30-10:30		9:30-11-30, T. Th. S.
	Chemical Principles (303-4-5)	3	9	6		8:30-9:30	2:30-5:30, M. W. F.
	Engrg. (800-801-526)	3		4		12:30-1:30
	Engrg. (811-830-x)	3		2	10:30-11:30, Winter	12:30-1:30, Fall
	Engrg. (860-x-x)		6	1			6 h. a. w. Fall
Junior	Business Speaking (7-8-9)	3		3	8:30-9:30 or	8:30-9:30
	Econs. (10-11-12) or	3		3	10:30-11:30
	Mod. Lang. (40-41-42) M. T. W. Th. F.	5		3	8:30-9:30 or 9:30-10:30	8:30-9:30 or 9:30-10:30
	German (43-44-45)	3		3	9:30-10:30
	Math (111) Fall	3		1		11:30-12:30
	Quant. Anal. (318-319-320)	1	6	3	1 hr. to be arranged		2:30-5:30, M. W.
	Phys. Chem. (321-322-323)	3	6	6	12:30-1:30		2:30-5:30, T. Th.
	Engrg. Geol. (400-401-402)	3	6	6	8:30-9:30		6 h. a. w.
	Ap. Math. (527-524-525 or 530)	3	6	6		10:30-11:30	11:30-1:30, T. Th. S. Winter and Spring
	Civil Engrg. (701-x-529)	3		3		9:30-10:30
	Civil Engrg. (x-703-x)	3		1		11:30-12:30
	Mech. Engrg. (802-803-808)	3		3	11:30-12:30
	Elec. Engrg. (900-901-902)	3	3	4½	11:30-12:30		2:30-5:30, T.
	Exp. Engrg. (650)		6	1			6 h. a. w. Winter
	Exp. Engrg. (691-690-692)	1	4	3	12:30-1:30 F		2:30-6:30, M. or W.
	Elec. Lab. (950-951)	1	4	2	12:30-1:30 W.		2:30-6:30, M or W. or Th. Winter & Spring
	Ry. Field-work (751)		9	1½			9 h. a. w. Fall
Senior	Cost Accounting (21-22-23)	3		3	9:30-10-30
	Org. Chem. (309-310-311)	3	6	6		11:30-12:30	2:30-5:30, T. Th.
	Chem. Engrg. (324-325-326)	3		3	9:30-10:30
	Ap. Math. (715-x-x)	3		2		10:30-11:30
	Ap. Math. (x-528-x)	3		2	10:30-11:30
	Ap. Math. (x-x-529)	3		2		9:30-10:30
	Civil Engrg. (x-705-718)	3	6	3	10:30-11:30		6 h. a. w. Spring
	Civil Engrg. (708-x-709)	3	6	4		11:30-12:30	6 h. a. w. Fall and Spring
	Mech. Engrg. (812-813-804)	3		3	11:30-12:30
	Mech. Engrg. (833-834-835)	3		3	9:30-10:30
	Mech. Engrg. (x-x-836)	3		1	8:30-9:30
	Electric. Engrg. (903-904-905)	3	3	4½	10:30-11:30		2:30-5:30, Th.
	Elec. Engrg. (910-911)	3		2		9:30-10:30
	Engrg. Design (581-x-x)		6	1			6 h. a. w. Fall
	Exp. Engrg. (662-663)	1	4	2	11:30-12:30, F.		2:30-6:30, T. or Th. or F.
	Exp. Engrg. (670-661-680)	1	4	3		11:30-12:30, Th	2:30-6:30, T. or Th. or F.
	Bridge Draw. (755)		12	2			12 h. a. w. Winter
	Met. Lab. (x-863-x)		3	½			3 h. a. w. Winter
	Engrg. Design (867-x-868)		6	2			6 h. a. w. Fall and Spring
	Elec. Lab. (953-954-955)	1	4	3	11:30-12:30, W		2:30-6:30, M. or W. or F.
	Elec. Lab. (960-61)	1	4	2	10:30-11:30, W		2:30-6:30, M. or W. or F. Winter and

1934-1935
CURRICULUM IN CHEMICAL ENGINEERING

	Humanities	Mathematics and Science	Technical Engineering
Freshman	English:	Mathematics:	Plane Surveying
	Rhetoric and Composition	Trigonometry	Mechanical Drawing
	Reports and Letter Writing	Analytical Geometry and	Descriptive Geometry
	Technical Papers	College Algebra	El. Mech. Technology
		Chemistry	Drawing Laboratory
			Field-work
Sophomore	German	Mathematics:
		Differential and
		Integral Calculus
		Physics
		Chemical Principles
		Mathematics Laboratory
Junior	Business Speaking	Quantitative Analysis	Elementary Thermo.
	German	Physical Chemistry	Elem. Ap. Thermo.
			Elementary Mechanics
Senior		Organic Chemistry	Materials of Construction
		Engrg. Design	Electric Systems
		Hydraulics	Chemical Engineering Principles
		Hydraulics Laboratory
			Power Testing
Degree of B. S. in Engineering on completion of Four-Year Course.
Graduate	Cost Accounting	Applied Chemistry	Engineering Economics and Specifications
	Elective:
	Philosophy		Chemical Engineering Research
	or Architecture
	or Fine Arts		Ad. Chemical Engineering
	or other subject
	approved by the
	Faculty of
	Engineering
Degree of Ch. E. on completion of the additional Graduate Course.

Practice courses are printed in Italics; courses with combined lecture and laboratory work in Black Face Type.

1934-1935
CURRICULUM IN CIVIL ENGINEERING

	Humanities	Mathematics and Science	Technical Engineering
Freshman	English:	Mathematics:	Plane Surveying
	Rhetoric and Composition	Trigonometry	Mechanical Drawing
	Reports and Letter Writing	Analytical Geometry and	Descriptive Geometry
	Technical Papers	College Algebra	El. Mech. Technology
		Chemistry	Drawing Laboratory
			Field-work
Sophomore	Options:	Mathematics	Elementary Thermo.
	History	Differential and	Elem. Ap. Thermo.
	or Government	Integral Calculus	Elementary Mechanics
	or Commercial Law	Physics
		Mathematics Laboratory
Junior	Business Speaking	Applied Mechanics	Curves and Earthwork
	Options:	Graphical Statics	Highways
	Economics	Structural Drawing	Road Materials Tests
	or Modern Language	Hydraulics	Railway Surveying
		Drawing Laboratory
Senior	Cost Accounting	Strength of Materials	Materials of Construction
		Mechanics Laboratory	Masonry
			Bridges
			Water Supply and Sewerage
			Bridge Drafting
Degree of B. S. in Engineering on completion of Four-Year Course.
Graduate	Elective:	Engineering Geology	Engineering Economics and Specifications
	Philosophy
	or Architecture		Option:
	or Fine Arts		Advanced Structural Engineering
	or other subject
	approved by the		or Advanced Water Supply and Sewerage
	Faculty of
	Engineering		Electric Systems
			C. E. Research
Degree of C. E. on completion of additional Graduate Course.

Practice courses are printed in Italics; courses with combined lecture and laboratory work in Black Face Type.

1934-1935
CURRICULUM IN ELECTRICAL ENGINEERING

	Humanities	Mathematics and Science	Technical Engineering
Freshman	English:	Mathematics:	Plane Surveying
	Rhetoric and Composition	Trigonometry	Mechanical Drawing
	Reports and Letter Writing	Analytical Geometry and	Descriptive Geometry
	Technical Papers	College Algebra	El. Mech. Technology
		Chemistry	Drawing Laboratory
			Field-work
Sophomore	Options:	Mathematics:	Elementary Thermo.
	History	Differential and	Elem. Ap. Thermo.
	or Government	Integral Calculus	Elementary Mechanics
	or Commercial Law	Physics
		Mathematics Laboratory
Junior	Business Speaking	Mathematics:	Elements of Electricity
	Option:	Differential Equations	Direct Cur. Machinery
	Economics	Applied Mechanics	Periodic Currents
	or Modern Language	Graphical Statics	Machine Design
		Drawing Laboratory	Electrical Laboratory
			Supervised Problem Work
Senior	Cost Accounting	Hydraulics	Materials of Construction
		Strength of Materials	Alternating Current Machinery
		Mechanics Laboratory
			Electrical Laboratory
			Supervised Problem Work
Degree of B. S. in Engineering on completion of Four-Year Course.
Graduate	Elective:		Electric Power
	Philosophy		Engineering Economics and Specifications
	or Architecture
	or Fine Arts		Electric Transients
	or other subject		Option:
	approved by the		Illumination and Photometry
	Faculty of
	Engineering		or Electronics
			or Electric Traction
			Option:
			Adv. Alternating Current Machinery
			or Electrical Communication
Degree of E. E. on completion of the additional Graduate Course.

Practice courses are printed in Italics; courses with combined lecture and laboratory work in Black Face Type.

1934-1935
CURRICULUM IN MECHANICAL ENGINEERING
Option A—Power; Option B—Aeronautics

	Humanities	Mathematics and Science	Technical Engineering
Freshman	English:	Mathematics:	Plane Surveying
	Rhetoric and Composition	Trigonometry	Mechanical Drawing
	Reports and Letter Writing	Analytical Geometry and	Descriptive Geometry
	Technical Papers	College Algebra	El. Mech. Technology
		Chemistry	Drawing Laboratory
			Field-work
Sophomore	Options:	Mathematics:	Machine Design
	History	Differential and	General Aeronautics
	or Government	Integral Calculus	Elementary Mechanics
	or Commercial Law	Physics	Engineering Drawing
		Mathematical Laboratory
Junior	Business Speaking	Applied Mechanics	General Thermodynamics
	Option:	Graphical Statics	Power Plants
	Economics	Structural Drawing	Steam Power Plants
	or Modern Language	Mechanics Laboratory	Power Testing
		Drawing Laboratory
Senior	Cost Accounting[3]	Hydraulics	Materials of Construction
		Strength of Materials	Theory of Machines
		Mechanics Laboratory	Metallography of Iron and Steel
			Aerodynamics (B-option)
			Airplane Design (B-option)
			Heating, Ventilation and Refrigeration (A-option)
			Airplane Structures (B-option)
			Power Testing
			Electric Systems
			Engineering Design
Degree of B. S. in Engineering on completion of Four-Year Course.
Graduate	Elective		Steam Generators, Turbines and Diesel Engines
	Philosophy
	or Architecture		Mechanism, Mechanics of Machinery and Engrg. and Industrial Processes
	or Fine Arts
	or other subject
	approved by the		Industrial Management
	Faculty of		Engineering Economics and Specifications
	Engineering
Degree of M. E. on completion of the additional Graduate Course.

Practice courses are printed in Italics; courses with combined lecture and laboratory work in Black Face Type.

[3]

Taken in Junior year instead of Economics by those choosing B-option.

LECTURE HOURS AND EXAMINATION DAYS, 1934-35

MONDAY, WEDNESDAY, FRIDAY					TUESDAY, THURSDAY, SATURDAY
Exam. Day				Lecture Hour		Exam. Day
Fall	Winter	Spring				Fall	Winter	Spring
IV	X	II	Mech. Engineering (x-x-836)	8:30 to 9:30	Business Speaking (7-8-9)	X	V	VII
					Anal. Chemistry (303-304-305)
V	I	I	Cost Accounting (21-22-23)	9:30 to 10:30	Mathematics (100-106-107)	IX	VI	VIII
			Physics (200-201-202)		Civil Engineering (701-x-529)
			Chem. Engineering (324-325-326)		Elec. Engineering (910-911-x)
			Mech. Engineering (833-834-835)
I	IV	VI	Economics (10-11-12)	10:30 to 11:30		III	II	IV
			Applied Mathematics (521-522-523)		General Chemistry (300-301-302)
			Civil Engineering (x-705-718)		Applied Mathematics (527-524-525-530)
			Mech. Engineering (x-830-x)		Civil Engineering (715-x-x)
			Elec. Engineering (903-904-905)
VIII	VII	IX	Mathematics (108-109-110)	11:30 to 12:30	Commercial Law (13-14-15)	VI	IX	III
			Mech. Engineering (802-803-808)		Mathematics (111-x-x)
			Mech. Engineering (812-813-804)		Organic Chemistry (309-310-311)
			Elec. Engineering (900-901-902)		Civil Engineering (708-709-703-528)
VII	VIII	X	English (1-2-3)	12:30 to 1:30	Engineering (800-801-526)	II	III	V
			Physical Chemistry (321-322-323)		Mech. Engineering (811-x-x)

The examination days for the various classes are fixed by
the hour of regular lecture period. The examination day for a
particular course is indicated in the table above by the Roman
numeral in the first or last columns, for the corresponding lecture
hours in the middle column. The examination period covers
ten days at the end of each term. Examination days change
each term.

A change in lecture for any course will change the examination
day correspondingly. Classes for which lecture periods are
not indicated will have examination days fixed by the arranged
lecture hour in accordance with above schedule. Laboratory
examinations are arranged to suit classes.

EXPENSES OF REGULAR STUDENTS

The average annual expense of a student who pursues the regular course
in Engineering will be:

	NonVirginians	Freshmen Virginians	Other Virginians
University Fee	$ 60	$ 50	$ 50
Tuition	200	65	130
Athletic Fee	15	15	15
Laboratory Fees (average)	35	45	35
Living Expenses (for 9 months)	375	375	375
Books and Drawing Materials	30	30	30
Incidental Expenses (for 9 months)	60	60	60
Total annual for average conditions	$775	$640	$695

The charges for Tuition are uniform to all students, except that Virginians
are relieved of tuition on courses offered in the College, this exception
saving regular Freshmen from Virginia $135 and all other Virginia
students $70 each year in comparison with non-Virginians.

The laboratory charges are $15 per class for the year's course in Physics,
and $20 per class for a year's course in Chemistry. A deposit for breakage of
$5 is required for each laboratory course in Chemistry. A fee of $5 each
for the year's course in Engineering Geology and in Mineralogy is charged.
The fee for each practice course in the Engineering Department, Drawing,
and Engineering Laboratories is $5 per term for each course. The fees
for Field-work and Bridge Drafting are each $10 per term per course. These
fees include all charges for laboratory materials; but the student is held
further responsible for breakage.

The Living Expenses include board, lodging, fuel and lights, servant and
laundry; the average is $10.00 per week, the minimum $7.50, and a reasonable
maximum $12.50. Books and Drawing Materials will cost about $120 for the
four-year course. Incidental Expenses ought to be kept within modest
bounds; the above estimate is sufficient; large allowances of pocket money
promote idleness and attract companions of the baser sort. No allowances
are included for clothing and travel, the expenses for which vary too much
to be introduced into any general estimate.

The charges payable on entrance are the University Fee, the Athletic
Fee, and the Tuition and Laboratory Fees.

SCHOLARSHIPS

The Accredited School Scholarships from accredited public or private
secondary schools may be assigned to the Department of Engineering. Tenure,
one year. Emolument, for Virginians, the remission of $60 in fees; for nonVirginians,
the remission of $150 in fees.

The holder must be a graduate of his school, he must rank in the highest
quarter of his class, and he must enter the University the session immediately
following his graduation.

The Alumni Scholarships may be assigned to the Department of Engineering.
Tenure, one year, but an incumbent may be eligible for reappointment upon
recommendation of the Dean. Emolument, for Virginians, the remission of $60
in fees; for non-Virginians, the remission of $150 in fees.

The holder must need financial aid in order to attend the University, and
must file a written statement to this effect, together with a similar statement from
his parent or guardian. He must have ranked in the highest quarter of the
graduating class of his school, and must enter the University the session immediately
following his graduation.

The Philip Francis duPont Scholarships: Founded in 1928 upon the
generous bequest of Philip Francis duPont, '00:

In the Department of Engineering a number of these scholarships are
awarded annually to both new and old students of the department. The emolument
will vary from $100 to $150, depending upon the income available, with
apportionment at the discretion of the Faculty of Engineering.

The tenure of each scholarship is one year, but any incumbent may be reappointed
upon recommendation of the Dean.

Applicants for these scholarships who have not previously attended the University
must have complied with the entrance requirements before their applications
can be considered; they must give evidence of financial need; and they
must have ranked in the highest quarter of their class. Preference is given to
applicants who ranked in the highest tenth of their class.

Applications must be made on a blank form supplied by the Dean. Students
who have not attended the University must submit their applications not later than
July 1; students attending the University must apply not later than May 1.

The Isabella Merrick Sampson Scholarship in the Department of Engineering,
with an income of $100: Founded in 1910 upon the gift of Mr. W. Gordon
Merrick, of Glendower, Albemarle County, Virginia. Appointments are
made upon the recommendation of the trustees of the Isabella Merrick Sampson
Endowment. Preference is given to an applicant from Albemarle County.

A limited number of additional scholarships may be granted in the Department
of Engineering from those general scholarships open to any department of the
University. A complete statement regarding all scholarships will be found in the
General Catalogue.

LOAN FUNDS AND STUDENT SELF-HELP

The University is in possession of funds from which loans are made to
deserving students in need of such assistance. An account of these loans is
given in the General Catalogue. Inquiries concerning them should be addressed
to the Bursar.

Opportunities for obtaining remunerative employment are afforded to students
who are desirous by this means of partially paying their way through the University.
It is difficult to give definite assurance of employment to a student before
he reaches the University, but it may be stated that any student with sufficient
resources to carry him through the first half of the session can be reasonably

sure of obtaining work which will help defray his expenses for the rest of the
academic year. Information as to employment may be obtained from the Director,
Bureau of Student Self-Help, Box 1487, University, Virginia.

EXAMINATIONS AND REPORTS

Oral Examinations are held at the beginning of each lecture hour on the
topics of the preceding lecture. Written test papers are set monthly, or at such
interval as the professor may appoint. Absences from lecture except by reason
of sickness are not excused without a written leave from the Dean. Class standing
is determined on the basis of the oral examinations and the written tests.
Absence from the latter or failure to answer incurs a 0 grade. Absences from
laboratory periods, however caused, must be made up by special private arrangement
with the instructor.

Written Examinations are held at the end of each term on the entire
work of that term. The result of examination combined with the student's class-standing
gives his term-grade. The pass-mark is 75 per cent. Absence from
the written term examination incurs a 0 term-grade, which may not be removed
except by the passage of a special written examination on the work of that term.
Such special examinations are granted only upon presentation of a written certificate
from a reputable physician that the student by reason of sickness on the
day of the regular examination was unable to attend.

Regular Reports are sent out at the end of every term to the student's
parent or guardian. These state for each course followed the term-grade. Further
comment may be added by the Dean or the professor, if it appears probable
that such comment would be helpful to the student. Parents are urged to examine
these reports carefully and to exert such parental influence as may seem needed
to establish and confirm the student in habits of industry and order.

Special Reports are sent to parents at the end of each month for students
delinquent in attendance or studiousness and for delinquents only. When a
student is making steady progress and showing due diligence in his work,
only the regular reports are sent. The receipt of a special report is evidence
that, in the judgment of the faculty, prompt and pointed parental admonition
is urgently needed.

If in any class in the Department of Engineering a student fails to make
satisfactory progress, he is first admonished by the professor in charge. In
default of prompt and permanent improvement, he is next formally warned
by the Dean. If due amendment is then not immediately effected, the student's
name is dropped from the rolls of the Department,, on the ground that
he is not accomplishing the purposes for which he should have entered upon
a University course of study.

REGULATIONS

The following regulations, adopted to define the policy of the faculty, are
published for the information and guidance of the students:

1. Practice-courses as well as lecture-courses must be conducted under
the Honor System. The student who submits any work to be graded is considered
to submit it under pledge.

2. When the lecture-course and the associated practice-course are given
in the same term of the same year, no student will be admitted to examination on
the lecture-course until he has completed at least three-fourths of the practice-course.

3. No student will be admitted to any practice-course unless he is at the
same time pursuing the associated lecture-course, or has already received credit
for the same.

4. No student will be admitted to the graduating examination on a lecture-course
unless he has been present at more than half the lectures in that course.

5. In the technical courses in Engineering (i. e., courses not given in the
College) term-grades shall not be averaged; except that the term-grades for
Freshmen Applied Mathematics may be averaged for the first-year men only,
provided no mark is below 65, and term-grades in Freshman English, Freshman
Mathematics, Sophomore Mathematics, and Sophomore Physics may be
averaged, provided a grade of 75 or higher be made in the third term of the
course with no grade below 65 in the first and second terms of the course.

6. The pass-mark in every course is 75. Class standing and written examination
are combined for the term-grade in such proportions as the several professors
may determine.

7. No student who fails to make 75 on term-grade shall be granted another
examination on the course until he has again attended lectures on that course.

8. A student who fails a second time on any course will be allowed to attempt
the course for a third time only by special permission of the faculty; a third
failure in a course will prevent such student from acceptance as a degree candidate
here in engineering.

9. Special examinations are not given except by reason of sickness on the
day of examination, attested by the written certificate of a reputable physician, or
for other like providential causes. In every case they must be validated by special
vote of the faculty.

10. Any engineering student who fails to attain a passing grade of 75 on
at least 9 term-hours will be placed on probation for the following term, probation
to continue until at least 9 term-hours are passed in one term. No engineering
student shall remain on probation for more than three terms, whether consecutive
or not, in his entire engineering course. If probation is imposed a fourth time the
student shall be suspended.

11. Any engineering student on probation who fails to attain a passing grade
of 75 on at least 6 term-hours and whose average grade on all courses taken is
less than 65 will be suspended. Any engineering student who passes less than 6
term-hours and whose average grade on all courses taken is less than 65 will be
suspended. Suspension during a session continues for the remainder of the regular
session. Suspension imposed at the end of a session holds for the whole of a
subsequent session, except that such suspension may be absolved by the successful
completion of prescribed work in the Summer Quarter. No engineering student
suspended for a second time shall re-enter the department.

12. The Dean's List.—A student, who, in any successive three terms,
passes on all courses taken, aggregating not less than 18 session-hours,
with an average grade on all courses of not less than 82 per cent,
will be placed on the Dean's list. A student, who, in any successive
three terms, passes on all courses taken aggregating not less than
18 session-hours, but who does not average 82 per cent, and who, in any subsequent
term, passes on all courses taken, aggregating not less than 18 term-hours, with an
average grade on all 18 term-hours of not less than 82 per cent will be placed
on the Dean's List. A student will be automatically dropped from the Dean's List,
if, in any term, he does not pass on all courses taken, aggregating not less than
18 term-hours, with an average grade on all courses of not less than 82 per cent.
A student dropped from the Dean's List will be again placed on it if he meets the
above mentioned standard for a term. A student on the Dean's List is not subject
to the regulations limiting the issuance of leaves of absence from the University,
nor does absence from any class entail on such student any penalty, affecting
class standing, imposed for absence alone. Students on the Dean's List must
attend all laboratory classes and must perform all written problem work and take
all written quizzes under the same conditions as all other students.

DRAFTING ROOMS

The Drafting Rooms are abundantly lighted and are provided with solidly
constructed tables with locked drawers for instruments and materials. Each student
is assigned to a table and has a drawer for his exclusive use. The regular
Drawing Classes execute each one plate a week under the supervision of the
Instructors in Drawing. The more advanced students have such additional drawings
assigned by their respective professors as are needed for the full development
of the courses of study.

Careful attention is given to the training of the students in free-hand lettering,
in the conventional signs of mechanical drawing, in the proper layout of drawings,
and in neat and accurate execution. Exercises are required also in tracing and in
blue-printing, the rooms for which are conveniently arranged and in close contiguity
to the drafting rooms. A vertical blue-printing machine with arc lamp,
complete with trays, has recently been procured and installed. While, however,
technical dexterity is demanded, the graphical method is taught and used primarily
as an indispensable instrument of research, the thoughtful mastery of which is
essential for the instructed Engineer.

The construction and theory of the Polar Planimeter, the Slide Rule, and
the Pantograph are carefully taught, and the student is trained in the practical
use of these appliances for the rapid and accurate production of estimates and
copies from finished drawings.

EXPERIMENTAL ENGINEERING LABORATORIES

Road Materials Laboratory.—The apparatus for tests of non-bituminous
road materials includes a two-cylinder Deval abrasion machine, a ball mill, a
moulding press for briquettes of rock dust, a Page impact cementation tester,
a Page impact toughness tester, a rock crusher and a Purdue brick rattler. This

outfit the University owes to the generous aid of the late Dr. Logan Waller Page.
In addition, the Department has acquired a 40,000-pound compression tester, a
diamond core drill, a diamond rock saw, a grinding lap, a Westphal balance,
specific gravity apparatus, and a complete set of sieves. Useful researches in the
road-building rocks and gravels of Virginia, as well as the standard tests, are
conducted each year by the class in Civil Engineering.

The apparatus for tests of bituminous road materials includes the New York
Testing Laboratory penetrometer, the Kirschbaum ductility machine, the Engler
viscosimeter, the asphalt viscosimeter, the New York Testing Laboratory extractor,
the New York State Board of Health oil tester, Hubbard pyknometers, asphalt
flow plates, gas and electric hot plates, and the accessory apparatus needed for
research on bituminous road-binders.

Structural Materials Laboratory.—The Sinclair Laboratory for work in
testing structural materials was founded on the original donation of Mrs. John
Sinclair, of New York City, as a memorial to her late husband. The collection
has since been considerably enlarged. It contains a Riehle 100,000-pound machine,
arranged for tensile, compressive, and transverse tests, with an attachment for
taking autographic diagrams; an Olsen 100,000-pound machine and fitted with a
suspended ball compression block; a 200,000-pound Olsen machine suitable for
compressive tests and also supplied with extension arms for making transverse
tests of beams; an Olsen torsion machine of 50,000 inch-pounds capacity; an
Olsen impact-testing machine of 100 foot-pounds capacity; three machines of
rotating beam type for fatigue tests of metals; Shore scleroscope; a Ewing machine
for finding the modulus of elasticity; hand machines for testing rods and wires
under pull, and small specimens of timber and cast iron under transverse loads.
It is also equipped with accessory measuring instruments; these include a Riehle
extensometer, an Olsen compressometer for metals and timber, an Olsen special
strain gauge extensometer, an Olsen special extensometer, Olsen wire extensometers,
a Ewing extensometer of great delicacy, and tools for shearing tests of
metals and timber.

The laboratory is completely equipped for making tests of cement, cement
aggregates, and concrete. It contains a Fairbank's tensile tester of 1,000 pounds
capacity; a compressometer for concrete specimens; Riehle dial compressometer
for concrete specimens; Riehle dial compressometer-extensometer for specimens up
to 3-inch diameter; tools for shearing tests of concrete; an Olsen steaming oven
for accelerated tests; a Freas electric drying oven with automatic temperature
regulation; moist air closets; sieves for mechanical analysis; moulds for tension
and compression tests; and the required small apparatus.

Fuel and Oil Laboratory.—For the determination of the heating value
of coal, petroleum, etc., the laboratory has an Emerson bomb calorimeter. For
gas and liquid fuel calorimetry, a Junker calorimeter made by the American
Meter Co. is used. The equipment also includes two electric muffle furnaces, a
Freas electric drying oven with automatic temperature regulation, sample crusher
and grinder, a Brown high resistance pyrometer, balances, platinum, crucibles, etc.
For investigating lubricants, the laboratory is equipped with such apparatus as
flash and chill point testers, hydrometers, viscosimeters, etc., used in the determination
of the physical properties of oil.

Hydraulics Laboratory.—The laboratory equipment for work in hydraulics
comprises a steel tank for weir experiments with interchangeable bronze
notches; a hook gauge for measurement of surface levels; a stand-pipe provided
with a set of standard bronze orifices for experiments on efflux; commercial pipe
and elbows arranged for determining friction losses; Gurley current meter; and
the necessary scales, tanks, manometers, etc. It also includes a pump which is
piped to circulate water from a cement cistern to a tank in the attic of the building.

Additional equipment of this laboratory is a motor driven centrifugal pump
with a capacity of 350 gallons per minute at 100 feet head, equipped with a Venturi
meter and the necessary piping, valves and gauges to provide for complete performance
tests on the pump. This unit also supplies water at constant pressure
for the other hydraulic tests. Recently added were a motor driven centrifugal
pump with a capacity of 300 gallons per minute at 500 feet head, and a Pelton
wheel manufactured by the Pelton Wheel Company expressly for laboratory use.

Power Laboratory.—The laboratory is equipped to illustrate the theory
involved in Mechanical Engineering; to give practical instruction in the handling
of machinery; and to teach the fundamental methods of experimental work. It
contains a Ball high-speed engine; a De Laval turbine with condensing and noncondensing
nozzles, which is direct-connected to a 20-kva. alternating-current
generator; an Otto gasoline engine with a special piston for alcohol; a White and
Middleton 12 HP. Engine (gasoline or illuminating gas); two Liberty aeroplane
motors; a Wheeler surface condenser to which the exhaust from any of the steam
units may be connected; a Sturtevant engine and blower; an air compressor; an
A. B. C. Pitot tube; a steam pump; steam traps, etc. For boiler tests, the boilers
of the University Heating and Lighting Plant are used. The work of this laboratory
has been facilitated by the recent installation of a Wickes 50 horsepower three
drum bent tube boiler designed for a working pressure of 150 pounds. This boiler
supplies steam to the laboratory and also affords excellent opportunities for boiler
tests.

The instrument room contains all necessary apparatus for carrying out complete
tests. Among this may be mentioned indicators, thermometers, gauges, planimeters,
with standards for their correction and calibration; two types of Orsat apparatus;
separating and throttling calorimeters, etc.

FIELD WORK IN CIVIL ENGINEERING

The outfit of field instruments contains compasses, transits, and levels of various
approved makes; a solar transit, furnished also with stadia wires and gradienter
for tachymetric work; a Gurley mining transit, one of the finest products of the
instrument maker's art; a complete Gurley transit, graduated to 30 seconds, with
solar attachment; hand-levels and clinometers for field topography; plane tables;
a sextant; together with an adequate supply of leveling rods, telemeter rods,
signal poles, chains, tapes, pins, and so on. For hydraulic surveys a hook gauge
and a current meter are provided. All students are instructed in the theory and
adjustments of the field instruments and in their practical use in the field. They
are also required to make up their field-books in standard forms; to reduce their
surveys and execute all the necessary profiles, plans and maps; and to determine
lengths, areas, and volumes both from the maps and from the original notes. Polar

planimeters are provided for facilitating such estimates, and a pantograph for making
reduced copies of finished drawings. A set of Beggs' Deformeter apparatus
is available for use in the work of Bridge Design.

ELECTRICAL ENGINEERING LABORATORY

The Scott Laboratory of Electrical Engineering.—This laboratory was
initially equipped and endowed by Mrs. Frances Branch Scott, of Richmond, Va.,
as a memorial to her late son, an alumnus of this University. During the year
1910 the equipment was substantially increased through the generosity of the Hon.
Charles R. Crane, of Chicago, Ill., a friend of the University. In recent years a
large number of new machines, measuring instruments and pieces of auxiliary
apparatus have been purchased. Improvements are constantly being made and
items of equipment added. As a result the laboratory is now well supplied with
the best modern equipment.

Power is supplied to the laboratory from the University distribution system
through a transformer vault located in the building. There is also installed a
motor generator set consisting of a synchronous motor driving an alternator and
a three-wire direct-current generator. A complete three-panel switchboard for
the control of this set is equipped with the necessary instruments and includes an
automatic voltage regulator for the alternator. Power is carried from the switchboard
to distribution panels located at convenient points. Universal plug- and
receptacle-connections facilitate the setting up of all experimental combinations.

For the machine testing there are available several direct-current motor
generator sets with automatic control; numerous series, shunt and compound
motors and generators; synchronous and induction motor driven generator sets;
high voltage direct-current generator; steam turbine driven three-phase alternator
with exciter and control switchboard; two experimental test sets for alternating
current single or polyphase generator operation; single-phase induction motor;
single-phase repulsion-induction motor; two-phase induction motor; three-phase
squirrel cage induction motors of the general purpose, high reactance and double
cage types; wound rotor induction motors; induction generator; wound rotor induction
motor set for concatenation; Fynn-Weichsel synchronous induction motor;
frequency changer set; synchronous motors; rotary converter; arc welding generator
set; constant potential transformers; constant current transformer; polyphase
transformer; induction regulator; mercury arc and thermionic rectifiers; a number
of different types of A. C. and D. C. fractional horsepower motors; prony brakes
for all motors; adjustable resistances, inductances and capacitances.

The instrument room is unusually well equipped with all of the types of high
grade portable meters required for the laboratory tests, including frequency and
power factor meters, watthour meters, synchroscopes, tachometers, instrument
transformers, recording voltmeters, ammeters and wattmeters.

For testing and calibrating the portable instruments and for more precise work
in electrical measurements there are available a set of laboratory standard instruments
with standard shunts and resistances; standard cells; standard condensers,
inductances and resistances; galvanometers of the best modern type and numerous
other pieces of apparatus of the highest precision such as the Wolff potentiometer,
Siemens and Halske-Thomson double bridge, Carey-Foster bridge, Koepsel permeameter,
Fahy simplex permeameter and others.

For experiments in illumination and photometry there are a Station photometer
with Lummer-Brodhum screen, a Macbeth illuminometer, General Electric
and Weston portable foot-candle meters.

Equipment for the study of communication and power transmission includes
a complete artificial transmission line; an adjustable frequency test oscillator;
bridge; vacuum tube voltmeter-ammeter; representative pieces of modern telephone
equipment including two central office ringer sets; equipment for the study of
vacuum tube performance; model network distribution system; all with the necessary
auxiliary apparatus.

The laboratory is equipped with three oscillographs which are available for
the study of wave forms and transient phenomena. Two of the oscillographs are
of the latest portable type—one a six element and the other a one element. All
are complete with the necessary accessories for both visual observation and photographic
recording.

CHEMICAL ENGINEERING LABORATORY

For convenience in the supply of chemicals and accessories, facilities for
chemical engineering laboratory work are provided principally in the Chemical
Building. In addition to individual research rooms, approximately 2,000
square feet of floor area exists in the chemical engineering laboratory located
in the recently completed addition to the Chemical Building. This room is
provided with water, air, and electrical outlets of suitable capacity, floor
drainage, and a pit giving extra headroom for special apparatus. Plans are in
preparation for equipping this laboratory. Additional facilities exist at the
University Power House, where semi-plant scale absorption equipment has
been installed for the experimental treatment of flue gas.

BUILDINGS

The buildings at present devoted wholly or in part to the work of the
Department of Engineering are the following:

The Mechanical Laboratory is the main seat of the instruction in technical
studies. It is 180 by 70 feet and contains on the main floor the Dean's
office and the offices of three other professors; and three lecture-rooms.

Above are two offices, a reading room for students, and blue-print and
photographic rooms. Below on the ground floor are an office and classroom,
the electrical laboratories, the testing laboratories, apparatus and storerooms,
and the student's lavatory. In order to more adequately care for increased
numbers this building has undergone a considerable rearrangement during
recent years. Wood and machine shop equipment has been entirely removed
from the building, as well as the facilities for Drawing. This change made
available much needed classroom space and allowed the electrical laboratories
to be expanded. Incident to the changes new cement floors were constructed
for the Road Materials Testing Laboratory, the main testing Laboratory
and the main hall. A new high-pressure steam line from the Power
House was also installed.

The Drawing Room is temporarily housed in the sub-basement of Cabell
Hall which has been fitted for drawing. The room accommodates about 100
men, each man having his individual drawing desk.

The New Power House is a single story building 130 by 60 feet, in which
is housed the University heating plant. The equipment includes two 310
horsepower Heine water tube boilers, equipped with single retort stokers
of the underfeed type, supplied by the Combustion Engineering Corporation,
two Babcock and Wilcox boilers (Stirling type) fitted with underfeed twin-retort
Detroit stokers, two steam and two electrically driven circulating
pumps, low pressure heaters, etc. Provision has been made for the future
installation of two steam turbine generator sets for the supply of electric
current to the University buildings. The entire plant is available for instructional
purposes.

Plants available for inspection both locally and elsewhere throughout the
State include the Bremo Bluff and other generating stations of the Virginia
Public Service Company, numerous chemical plants, the Langley Memorial
Aeronautical Laboratory Hampton, the Newport News Shipyard, the Norfolk
Navy Yard, the Rothwell Cold Storage and Ice Company's plants in
Charlottesville and Waynesboro, the Norfolk and Western Railway shops and
the works of the Virginia Bridge and Iron Company at Roanoke, the Charlottesville
Woolen Mills, etc. Visits of several days' duration are organized to
distant points and are made to coincide, if possible, with some event of more
than usual interest, such as the launching of a cruiser at the Newport News
Shipyard, the visit of an airplane carrier to Hampton Roads or the sea trials
of a passenger liner.

The Geological Museum is 120 by 50 feet. It is a three-story building.
The main floor is devoted to the very extensive geological collection of specimens,
charts, relief maps, and so on. The gallery above contains an equally
good collection of minerals and numerous models of typical crystallographic
forms. The upper floor contains the lecture-rooms and the laboratories of
Economic Geology. In the basement are stored subsidiary collections and
new material accumulated in more recent geological surveys.

The Physical Laboratory faces the Mechanical Laboratory on the opposite
side of the quadrangle, and has almost the same proportions. The main
floor contains the lecture-room, the professors' offices, the laboratory of experimental
physics, and the storeroom for the very large collection of apparatus
used in the lectures. On the ground floor is the laboratory of theoretical
electricity, the storage battery room, a well-equipped shop for the
repair and manufacture of apparatus, and smaller rooms for the work of
graduate students.

The new Chemical Laboratory was opened for use in September, 1917,
In this fire-proof structure all the work in Chemistry is assembled. The floor
area provided is about 45,000 square feet. The lecture-rooms seat classes of
300, 75 and 25 students. The laboratories assigned to General Chemistry,
Organic Chemistry, Qualitative Analysis, Quantitative Analysis, and Physical
Chemistry contain 110, 60, 40, 30, and 20 desks. Altogether by dividing

classes into sections, 600 students may be accommodated. Smaller private
laboratories are provided for research workers. Large stock rooms communicating
by elevators with the several floors contain ample stores of chemical
supplies. The 5,000 volumes of books and bound sets of journals constituting
the Departmental Library of Chemistry are so housed as to be accessible to
both teachers and students.

NEW FACILITIES FOR ENGINEERING INSTRUCTION

Construction is now under way for a new center of engineering instruction
at the University of Virginia. Upon completion of the building program,
at the opening of the session of 1935-1936, the present center for engineering
instruction will leave the Mechanical Laboratory and be wholly
cared for in the new engineering group.

In general this new group will consist of three interconnected buildings
forming a U-structure approximately 300 feet on each side, and enclosing
a grass court about 150 feet square. The buildings are designated as Buildings
A, B and C, and they are to conform in architectural characteristics
with the University group as a whole with the emphasis in this group placed
upon the arcade rather than the colonnade motive.

The site selected affords ample ground and provides a most attractive
setting and outlook. The buildings are being erected on Observatory Road
to the west of Clark Hall, the Law Building, and not far from the Scott
Stadium, giving a fine outlook in all directions.

Building A, the main unit, will be of three stories. The basement will
house the laboratories of Hydraulics, Cement, and Fuel and Oil Testing,
each in a separate laboratory; general locker space for 300 and lavatories
with several storage rooms complete the basement. The first floor will provide
the office suite for teaching staff, with eleven offices, small lavatories,
faculty conference room, two class-rooms seating 75, four seating 40, and
three seating 25. The second, or top, floor is to be occupied by two large
drawing rooms with two smaller ones for advanced work; a fine library and
reading room with librarian's office, two other offices for instructors and a
blue-printing room.

Building B will be a one-story structure devoted to the Strength of Materials,
Steam and Gas Power, and Road Materials Testing, each in its separate
quarters; an instrument room for surveying equipment with office for the
instructors is included as well as office and storage rooms for the testing
laboratories; a student lounge room will be provided on a mezzanine gallery
level.

Building C will be of two stories. The ground floor houses the electrical
laboratory equipment, in a large main machinery laboratory with separate
laboratories for communication, illumination, and standardization work;
transformer room, battery room, and dark room complete the set-up with an
instrument room and office for the instructing staff. The upper floor will
provide a metallurgical laboratory, a demonstration machine shop, and wood
shop, tool room, repair shop, and a large laboratory for aeronautical apparatus,

with office and lavatory. The repair shop will be connected by elevator
with the lower floor to facilitate handling machinery needing repairs.

Joining Buildings A and C will be an auditorium seating 300, equipped
with sound-picture projection and special demonstration lecture table.

The opening of this group for service in September, 1935, will supply
facilities of a modern character long needed here to make possible the best
training in engineering, so far as physical plant is concerned, that the University
has ever been able to offer. The well-known rigid disciplines of the
formal instruction will hereafter be adequately supplemented by physical
equipment conveniently and substantially installed without crowding.

It is expected that the experimental equipment and fixtures will be very
considerably increased over the existing ones by the time the group is ready
for opening. Great care has been taken to supply the best lighting facilities
for all rooms and intercommunicating telephones will offer rapid communication
between all offices in the group. More complete details with regard to
the buildings and the new equipment will appear in the catalogue for next
year.

A fair idea of the finished appearance of the new group is given by the
architects' drawing depicted near the front of this catalogue.

RECIPIENTS OF DEGREES, DEPARTMENT OF ENGINEERING,
JUNE 13, 1933

Bachelors of Science in Engineering

Alvis, Samuel Macon, Jr.	Waynesboro, Va.
Bowles, John Waddell	Roanoke, Va.
Brandt, Carl Raymond	Great Neck, N. Y.
Davis, Edwin Theodore	University, Va.
Dunnington, William	Lynchburg, Va.
Edmonson, John Heron, Jr.	Birmingham, Ala.
Edwards, Tazewell Wayne, Jr.	Charlottesville, Va.
Gard, Walter Sumner	Chevy Chase, Md.
Godley, Ashton Little	Wallingford, Penna.
Hayden, William Solomon	Rokeby, Va.
Lewis, Hunter Feilding, Jr.	Richmond, Va.
LoCascio, Theodore John	Norfolk, Va.
Merow, Edward John	University, Va.
Miller, Luther Samuel	Charlottesville, Va.
Parker, Erle, Jr.	East Orange, N. J.
Robertson, William Sterling, Jr.	Charleston, W. Va.
Sender, Leopold	Philadelphia, Penna.
Stahl, Chester Earl	Charlottesville, Va.
Sutherland, Marvin McTyiere	Pulaski, Va.
Switzer, Boyd Griffith	Staunton, Va.
Weldon, Harry Aloysius	New Rochelle, N. Y.
Williams, John Randolph	Richmond, Va.

Electrical Engineers

Jones, Robert Brinkley, Jr., B.S.E., University of Virginia	Richmond, Va.
Peterson, Thomas James, B.S.E., University of Virginia	Audubon, N. J.

Summary of Degrees in Engineering, June, 1933

Bachelors of Science in Engineering	22
Electrical Engineers	2
Total	24

DEAN'S LIST OF DISTINGUISHED STUDENTS, DEPARTMENT
OF ENGINEERING, ENTIRE SESSION 1932-33

Ballard, Leonard William, Jr.	Charlottesville, Va.
Brandt, Carl Raymond	Great Neck, N. Y.
Carter, Gordon Keith	University, Va.
Conn, Ellis	Newport News, Va.
Doswell, Stonewall Jackson, Jr.	Staunton, Va.
Dunnington, William	Lynchburg, Va.
Edwards, Howard Berryman	Sweet Briar, Va.
Ellis, Earl Thayer	Charlottesville, Va.
Follin, Ernest Randolph, Jr.	Clarendon, Va.
Grady, James Arthur, Jr.	Pueblo, Colo.
Halstead, Woodrow Jennings	Buell, Va.
Hammond, Harry Martin	Winchester, Va.
Hayden, William Solomon	Rokeby, Va.
Jones, Robert Brinkley, Jr	Richmond, Va.
Lucas, John Wilson	Petersburg, Va.
Miller, Luther Samuel	Charlottesville, Va.
Mizroch, Jacob	Norfolk, Va.
Nelson, William Seddon Cabell	Winchester, Va.
Palmer, Aubrey Edwin	Crystal Hill, Va.
Payne, William Walker	Boyds, Md.
Peterson, Thomas James	Audubon, N. J.
Robinson, John Hunter	Cismont, Va.
Rosenberger, Richard Coe	Winchester, Va.
Spaulding, Morril Baughton, Jr.	Washington, D. C.
Watkins, Joel Hill, Jr	Charlotte C. H., Va.
Werkman, Kenneth Shaner	Yeadon, Penna.
Williams, John Randolph	Richmond, Va.
Total 27.

REGISTER OF STUDENTS, DEPARTMENT OF ENGINEERING

Freshman Class

Armentrout, Edwin Lee	Goshen, Va.
Bell, Ralph Everitt	Washington, D. C.
Brown, Jury Yates, Jr.	Charlottesville, Va.
Bumsted, Edgar John	Delaware City, Del.
Caldwell, William Everett, Jr.	Belleville, N. J.
Clark, Franklin Douglas	Waynesboro, Va.
Clark, Morris Skinner, Jr.	Charlottesville, Va.
Cowgill, Joseph Moreland	Paulsboro, N. J.
Davis, Walpole	University, Va.
Davison, John Franklin Miller	Pittsburgh, Penna.
De Brita, Maurice	Flushing, N. Y.
De Long, William Leander	Louisa, Va.
Denis, Reid Marsh	Darien, Conn.
Ehrich, Louis Siegman, Jr.	New Rochelle, N. Y.
Ferrer, Peter, Jr.	New York, N. Y.
Fitzhugh, Donald Lewis	Charlottesville, Va.
Freeman, Edward Butler	Glen Ridge, N. J.
Gilcrist, Barth John	Newburgh, N. Y.
Glenn, John Forsyth Cobb	Ivy Depot, Va.
Graff, Walter A., Jr.	Chicago, Ill.
Hansbrough, Samuel Scott	Winchester, Va.
Harrison, William Wright	Charlottesville, Va.
Herz, Martin Seymour	Washington, D. C.
Hurt, Percy Fuqua	Marion, Va.
Hutchinson, Edward Stanley, III	Norfolk, Va.
Jones, Arthur LeBaron	Hampton, Va.
Kasakoff, Harry	University, Va.
Landis, Herbert Joseph	Belleville, N. J.
Lewis, Ivey Foreman, Jr.	University, Va.
McCarthy, Edward Francis	New Britain, Conn.
McGaughy, John Bell	Norfolk, Va.
Mizroch, Aaron	Norfolk, Va.
Montoto, Antonio Sanchez	Havana, Cuba
Munson, Harlan Peirce	Westfield, N. Y.
Muse, Thomas Calvert	Proffit, Va.
Pack, Emmett Erastus, Jr.	Hinton, W. Va.
Porter, Henry Daniel	University, Va.
Roberts, John Merritt	Charlottesville, Va.
Rogers, John Cowden, Jr.	McDonald, Penna.
Rucker, John Tinsley, Jr.	Lynchburg, Va.
Somerville, Henry Brooke	Richmond, Va.
Talbot, Richmond dePeyster	New York, N. Y.
von Tacky, Richard Lewis	Titusville, Penna.
Whitcomb, John Gray	South Orange, N. J.
Zeisberg, Frederick Clemens, Jr.	Wilmington, Del.

Sophomore Class

Akerman, Nigel	Charlottesville, Va.
Anderson, Robert Vincent	Jackson Heights, N. Y.
Armstrong, Charles Glasgow	Charlottesville, Va.
Bailey, Merryman Priddy, Jr.	Norfolk, Va.
Black, Junie Almy	Churchland, Va.
Britton, William Ralph	Charlottesville, Va.
Carrick, Robert Craig	Richmond, Va.
Copper, Robert Gamble	Lyndhurst, Va.
Daniel, Henry Blount	Charlottesville, Va.
Daniel, Richard Micou	Alexandria, Va.
Donnally, Hugh Edward	Charlottesville, Va.
duPont, Francis George	Montchanin, Del.
Fall, James Huey, Jr	Greenville, Va.
Fitzpatrick, Paul William	Washington, D. C.
Gilbert, Chauncey McLean, Jr.	University, Va.
Gordon, Nicholas Thouron	University, Va.
Irvine, William Milligan, Jr	Culpeper, Va.
Janos, Angelus Alexander	Hinton, W. Va.
LaGiglia, Joseph Lewis	Norfolk, Va.
Poindexter, William Green, Jr	Morgan City, Miss.
Porter, George Jones	Norfolk, Va.
Priestman, George Dawson	Stanmore, England
Rutherfoord, John Penn	Roanoke, Va.
Speer, James Ramsey, Jr	Trappe, Md.
Starke, Vincent William	Crozet, Va.
Stipe, James Leslie	Stephenson, Va.
Wattles, Henry Starr, III	Alexandria, Va.
White, George Frederic, Jr	Richmond, Va.
Withers, Kent Cloyd	Pittsburgh, Penna.

Junior Class

Adams, James Richard	Lynchburg, Va.
Armistead, John Grant, Jr	Richmond, Va.
Babb, Andrew Bird	Winchester, Va.
Ballard, Leonard William, Jr	Charlottesville, Va.
Beachley, Elmer Taylor	Williamsport, Md.
Belmore, Edward Arthur	Schuyler, Va.
Boykin, Robert Hill, Jr.	Nutley, N. J.
Browder, Francis Elton	Lawrenceville, Va.
Carter, Walter Scott	Charlottesville, Va.
Cover, Jesse Reece, II	Elkton, Va.
Davis, Howard Roper	Norfolk, Va.
Davis, William Lee, Jr.	Portsmouth, Va.
Dudley, Aldrich, Jr	Alexandria, Va.
Edwards, Howard Berryman	Sweet Briar, Va.
Hahn, Charles Archie, Jr.	University, Va.
Kennedy, William Paca	Alexandria, Va.
Liady, Fred Gardner, Jr.	Charlottesville, Va.
Lucas, John Wilson	Petersburg, Va.
McCarty, Charles Allen	Bethlehem, Penna.
McIlhenny, Walter Stawffer	Charlottesville, Va.
McNaught, John Moses	Portsmouth, Va.
Maupin, Herman Rea	Charlottesville, Va.
Montgomery, Colin Tassie	Warrenton, Va.
Paterson, Roy Mackenzie	Newport News, Va.
Payne, William Walker	Boyds, Md.
Reese, Eben Bent	Wilmington, Del.
Robinson, Nelson Warren	Strasburg, Va.
Starke, William Wallace, Jr.	Norfolk, Va.
Stowe, Robert Sutton	Fairfax, Va.
Watkins, Benjamin Franklin	Richmond, Va.
Winston, Lucien Dade, III	Winston, Va.

Senior Class

Allen, Francis Leonard	Fairfield, Va.
Arakelian, Vahe Martyr	New York, N. Y.
Bress, Lewis Alfred	Norfolk, Va.
Cadot, Henry Meade	Richmond, Va.
Carson, James Samuel	Perryville, Md.
Carter, Gordon Keith	University, Va.
Conn, Ellis	Newport News, Va.
Doswell, Stonewall Jackson, Jr.	Staunton, Va.
Ellis, Earl Thayer	University, Va.
Follin, Ernest Randolph, Jr.	Clarendon, Va.
Garrett, Ben Hipple	Jetersville, Va.
George, Joseph Myron	Catlett, Va.
Glunt, John Spencer	Pedlar Mills, Va.
Grady, James Arthur, Jr.	Pueblo, Colo.
Halstead, Woodrow Jennings	Buell, Va.
Hammond, Harry Martin	Winchester, Va.
Hancock, John Beverly, Jr.	Richmond, Va.
Harper, Holmes Douglas	Winchester, Va.
Kinney, Theodore Simonson	Hasbrouck Hts., N. J.
McGhee, John Curran	Alexandria, Va.
Mizroch, Jacob	Norfolk, Va.
Nelson, William Seddon Cabell	Winchester, Va.
O'Brien, Edwin Morrow	Ridley Park, Penna.
Page, John Ruffner	Fort Monroe, Va.
Palmer, Aubrey Edwin	Crystal Hill, Va.
Pike, Frederick Philips	Washington, D. C.
Price, William Keyser, Jr.	New Market, Va.
Robinson, John Hunter	Cismont, Va.
Rosenberger, Richard Coe	Winchester, Va.
Ross, William Tyler	Roanoke, Va.
Savage, Seth Alonzo, Jr.	Portsmouth, Va.
Semones, Charles Howard	Indian Valley, Va.
Smiley, Samuel Dixon	Charleston, W. Va.
[4] Smith, Christopher Quarrier	Charleston, W. Va.
Watkins, Joel Hill, Jr.	Charlotte C. H., Va.
Werkman, Kenneth Shaner	Yeadon, Penna.

Post-Graduates

Edwards, Tazewell Wayne, Jr., B.S.E.	Charlottesville, Va.
Godley, Ashton Little, B.S.E.	Wallingford, Penna.
Lewis, Hunter Feilding, Jr., B.S.E.	Richmond, Va.
Miller, Luther Samuel, B.S.E.	Charlottesville, Va.
Stahl, Chester Earl, B.S.E.	Charlottesville, Va.
Williams, John Randolph, B.S.E.	Richmond, Va.

SUMMARY BY CLASSES

Freshmen	45
Sophomores	29
Juniors	31
Seniors	36
Post-Graduates	6
Total	147

SUMMARY BY STATES

Colorado		1
Connecticut		2
Delaware		4
District of Columbia		4
Illinois		1
Maryland		4
Mississippi		1
New Jersey		7
New York		8

Pennsylvania		8
Virginia		101
West Virginia		4
Foreign:
Cuba	1
England	1
		2
Total		147

[4]

Died, December 21, 1933.

[1]

On the Carnegie Foundation.

University of Virginia Library

DEPARTMENT OF ENGINEERING

Service Fellows and Instructors

Assistants

ENTRANCE REQUIREMENTS

ADMISSION OF WOMEN

ADVANCED STANDING

PROGRAMS OF STUDY

COURSES OF INSTRUCTION

HUMANITIES

1-2-3: English:

7-8-9: Business Speaking:

10-11-12: Economics:

13-14-15: Commercial Law:

16-17-18: Government:

21-22-23: Cost Accounting:

26: Engineering Economics and Specifications:

31-32-33: History:

34-35-36: Elective:

40-41-42: Modern Language:

43-44-45: German:

MATHEMATICS

100: Trigonometry:

106: Analytical Geometry and College Algebra:

107: Analytical Geometry and College Algebra:

108: Calculus:

109: Calculus:

110: Calculus:

111: Differential Equations:

158-159-160: Mathematics Laboratory:

PHYSICS

200-201-202: Sophomore Physics:

250-251-252: Physics Laboratory:

259: Electrical Laboratory:

CHEMISTRY

300a-301a-302a: General Chemistry:

350a-351a-352a: Chemistry Laboratory:

300b-301b-302b: General Chemistry:

350b-351b-352b: Chemistry Laboratory:

303-304-305: Chemical Principles:

353-354-355: Quantitative Analysis Laboratory:

306-307-308: Analytical Chemistry:

356-357-358: Analytical Chemistry Laboratory:

309-310-311: Organic Chemistry:

359-360-361: Organic Chemistry Laboratory:

318-319-320: Quantitative Analysis:

368-369-370: Quantitative Analysis Laboratory:

321-322-323: Physical Chemistry:

371-372-373: Physical Chemistry Laboratory:

324-325-326: Principles of Chemical Engineering:

327-328-329: Advanced Chemical Engineering:

340-341-342: Applied Chemistry:

374-375-376: Chemical Engineering Laboratory:

383-384-385: Undergraduate Chemical Engineering Research:

386-387-388: Chemical Engineering Research:

GEOLOGY

400-401-402: Engineering Geology:

450-451-452: Field and Laboratory:

APPLIED MATHEMATICS

521: Plane Surveying:

522: Mechanical Drawing:

523: Descriptive Geometry:

524: Graphical Statics:

525: Structural Drawing:

526: Elementary Mechanics:

527: Applied Mechanics:

528: Strength of Materials:

529: Hydraulics:

530: Machine Design: (For Electrical Course.)

581: Engineering Design: (For Chemical Course)

EXPERIMENTAL ENGINEERING

650: Road Materials Testing:

661: Structural Materials Testing:

662: Structural Materials Testing:

663: Structural Materials Testing:

670: Fuel and Oil Testing:

680: Hydraulic Testing:

690: Power Laboratory:

691: Power Laboratory:

692: Power Laboratory:

STUDENT BRANCHES OF NATIONAL PROFESSIONAL
SOCIETIES