The University of Virginia record :: January 15, 1929

WILLIAM MYNN THORNTON, B.A., LL.D.	Professor of Applied Mathematics
FRANCIS PERRY DUNNINGTON, C.E., E.M.	Professor of Analytical and Industrial Chemistry (retired)
WILLIAM HOLDING ECHOLS, B.S., C.E.	Professor of Mathematics
JAMES MORRIS PAGE, M.A., Ph.D., LL.D.	Professor of Mathematics
ROBERT MONTGOMERY BIRD, B.A., B.S., Ph.D.	Professor of Chemistry
WILLIAM HARRISON FAULKNER, M.A., Ph.D.	Professor of Germanic Languages
JOHN LLOYD NEWCOMB, B.A., C.E.	Professor of Civil Engineering
LLEWELLYN GRIFFITH HOXTON, B.S., B.A., M.A., Ph.D.	Professor of Physics
WALTER SHELDON RODMAN, M.S., S.M.	Professor of Electrical Engineering
CARROLL MASON SPARROW, B.A., Ph.D.	Professor of Physics
JOHN JENNINGS LUCK, M.A., Ph.D.	Professor of Mathematics
TIPTON RAY SNAVELY, M.A., Ph.D.	Professor of Economics
WILBUR ARMISTEAD NELSON, B.S., M.A.	Corcoran Professor of Geology
GARDNER LLOYD CARTER, M.A., Ph.D.	Professor of Chemistry
ALBERT JULIUS BARLOW, B.A., C.P.A.	Professor of Commerce and Business Administration
W. PATTON GRAHAM, M.A.	Professor of Romanic Languages
FRANCIS HARRIS ABBOT, M.A.	Professor of French
JOSEPH KENT ROBERTS, M.A., Ph.D.	Professor of Geology
JOHN HOWE YOE, M.S., M.A., Ph.D.	Professor of Chemistry
ARTHUR FERGUSON BENTON, M.A., Ph.D.	Professor of Chemistry
HERMAN PATRICK JOHNSON, M.A., Ph.M.	Associate Professor of English Literature
EDWARD WATTS SAUNDERS, Jr., C.E.	Associate Professor of Applied Mathematics
ARTHUR FRANCIS MACCONOCHIE, B. Sc. (Engrg.) London	Associate Professor of Mechanical Engineering
FREDERICK LYONS BROWN, M.A., Ph.D.	Associate Professor of Physics
ARMISTEAD CHURCHILL GORDON, Jr., M.A., Ph.D.	Associate Professor of English
FRANK STRINGFELLOW BARR, B.A. (Oxon.), M.A.	Associate Professor of History
JAMES SHANNON MILLER, Jr., B.S., B.A., E.F.	Associate Professor of Electrical Engineering
CHARLES HENDERSON, E.E.	Associate Professor of Experimental Engineering
CHARLES NEWTON HULVEY, M.S., LL.B.	Associate Professor of Commercial Law
THOMAS CARY JOHNSON, Jr., B.A., M.A.	Associate Professor of History
LAUREN BLAKELY HITCHCOCK, S.B., S.M.	Associate Professor of Chemical Engineering
WILLIAM PERCY MADDOX, B.A. (Oxon.)	Acting Associate Professor of Political Science
ARTHUR AUGUST PEGAU, M.A., Ph.D.	Assistant Professor of Geology
FRANZ KARL MOHR, M.A., Dr.Jur	Assistant Professor of Germanic Languages
HUGH MILLER SPENCER, B.A., M.S., Ph.D.	Assistant Professor of Chemistry
EDWIN CARLYLE MARKHAM, B.A., Ph.D.	Assistant Professor of Chemistry
ORESTE RINETTI, Ph.D.	Assistant Professor of Italian
THADDEUS BRAXTON WOODY, M.A.	Assistant Professor of Spanish

Instructors and Fellows

Alvin Blocksom Biscoe, B.A., M.A. (Teaching Fellow)	Economics
James Montrose Graham, Jr., B.S.E. (Teaching Fellow)	Chemistry
John Hulon Mote, M.S. (du Pont Fellow)	Chemistry
Robert Francis Selden, B.S.E. (Teaching Fellow)	Chemistry
Edward Carl Stevenson, B.S.E. (Teaching Fellow)	Physics
Jabez Curry Street, B.S. (Teaching Fellow)	Physics
Carlisle Monroe Thacker, B.S. (Teaching Fellow)	Chemistry
Joseph Lee Vaughan, B.A., M.A.	English
Montie Morton Weaver, B.S.	Mathematics
Fontaine Allen Wells, B.S.	Mathematics
Whiting Faulkner Young, B.S., M.A. (Teaching Fellow)	Chemistry

Assistants

Richmond Thomas McGregor Bell, B.S.	Chemistry
William Govan Brown, Jr.	Field-work
Randolph Warner Church	English Literature
George Lewis Cunningham, B.A.	Chemistry
Leonard Chapman Drake, B.A.	Chemistry
Robert Lewis Harrison Echols, B.S.	Mathematics
Robert Edward Lee Gildea	Shop-work
James Montrose Graham, Jr., B.S.E.	Cost Accounting
Charles Dorsey Harmon, B.A.	Mathematics
Clarence Mortimer Hawkins	Freshman Applied Mathematics
Julius Franklin Hunt, B.S.E., C.E.	Bridge Drafting
Edward Fruth Joachim, B.S.E., M.E.	Junior and Senior Applied Mathematics and Experimental Engineering
Robert Erwin Lee, Jr.	Field-work
Lowrey Love, Jr., B.A.	Chemistry
Charles Edward McMurdo	Physics
Donald Grant Macdonald, B.S.E.	Shop-work and Machine Design
Garnett Virgil Moore	Sophomore Applied Mathematics
Ovid Stephen Petrescu	Shop-work, Experimental Engineering, Junior Applied Mathematics and Thermodynamics
Gilford Godfrey Quarles	Field-work, Physics and Freshman Applied Mathematics
Lawrence Reginald Quarles	Physics and Freshman Applied Mathematics
Avery Henry Reed, Jr.	Field-work
William Minor Lile Rogers, B.A., B.S.E.	Electrical Engineering
Dave A. Sergent, Jr.	Field-work
Ewing Gordon Simpson, E.E.	Economics, Electrical Engineering and Mathematics
Edward Carl Stevenson, B.S.E.	Junior Applied Mathematics
Edward Leland Stewart, B.A.	Chemistry
Carey Meredith Swann, B.S.	Chemistry
Robert Joseph Taylor, B.A.	Chemistry
Arthur Carl Thompson	Field-work
Thomas Aubrey White, B.S. in Chem	Chemistry
Claude Mallory Wilkinson	Freshman Applied Mathematics
Floyd Henry Wirsing, B.S.	Chemistry

ENTRANCE REQUIREMENTS

For admission to the Freshman Class in the Department of Engineering the
candidate must be at least sixteen years old. He must present a certificate of
honorable withdrawal from the school last attended, or other valid proof of general
good character. He must further satisfy the Dean of the University as to
his adequate preparation for the work by passing the Entrance Examinations
specified below or by the presentation of equivalent certificates of preparation
signed by the president of a recognized institution of collegiate rank, or by the
principal of an accredited high school. The topics required for entrance and
their values in units are as follows, the unit being one year's work on the
subject in an accredited high school:

English A.—Grammar and Grammatical Analysis	1
English B.—Composition and Rhetoric	1
English C.—Critical Study of Specimens of Literature	1
Mathematics A1.—Algebra to Quadratics	1
Mathematics A2.—Quadratics, Progressions, Binomial Formula	1
Mathematics B.—Plane Geometry	1
Mathematics C.—Solid Geometry	½
Mathematics D.—Plane Trigonometry	½
History.—Ancient; Medieval; English; American (any one)	1
Electives	7
Total	15

High school students who expect to study Engineering are advised to
include among their electives at least one Foreign Language (Latin or French
or German), one Science (Chemistry or Physics with adequate laboratory
work) and an additional unit of History. Other electives which may be
profitably offered are History of English and American Literature, Greek,
Botany, Zoölogy, Physical Geography.

A candidate may be admitted as a Conditioned Student in spite of some
deficiencies in required entrance subjects, provided these are not such as
will impair the integrity of his work, but he must submit not less than 15
units. No such candidate will be conditioned except upon subjects actually
taught in this University, nor will any candidate be conditioned on more than
two units; and all conditions must be absolved before the beginning of the
next session after initial registration. Courses taken for the removal of entrance
conditions may in no case be counted as part of the work credited for any
degree. No conditions will be allowed in English A or B or in Mathematics
A1, A2, or B.

As the table of Entrance Requirements shows, the full High School course
in Mathematics is required for entrance to the Department of Engineering, but
unfortunately the graduates of the High Schools are often deficient in Solid
Geometry and Plane Trigonometry and can be admitted only upon conditions in
those subjects. High School principals are advised to urge their graduates, with
this status, to attend a Summer Session at the University before entering the
Department of Engineering so that these deficiencies may be overcome. If
the prospective student finds it impossible to attend a Summer School previous
to his regular matriculation, a course has been planned which will allow him
to make up his deficiencies by taking work in the Summer School following
his first year in Engineering. This course provides for Trigonometry, Solid
Geometry and College Algebra in the three terms of the regular session, with
the other work as outlined for the regular student, and in addition, in the two
terms of the Summer School, Analytical and Coördinate Geometry are taken.
Such a program will prepare the student for Sophomore standing and will save
him from the failure usually encountered by students who attempt to make up
the deficient work in regular session in addition to the full course of required
subjects.

A candidate may be admitted as a Special Student, without formal examination,
provided he is more than twenty years old if a Virginian and not less
than twenty-three years old if a non-Virginian, and gives evidence of serious
purpose and of fitness to pursue with profit the courses for which he is registered.
No special student may be a candidate for any degree. No conditioned
student may register later as a special student.

ADMISSION OF WOMEN

Women are admitted as candidates for the Engineering Degrees but not as
Special Students. A candidate must be at least twenty years old on the birthday
preceding matriculation; must present certificates showing graduation from
an accredited public high-school, or not less than four years' attendance in an
accredited private school, with credit for not less than fifteen college entrance
units obtained at least two years before admission to the University; and must

in addition show by proper certificate the completion in a standard college, subsequent
to the credit obtained for fifteen entrance-units, of at least thirty session-hours
(sixty semester-hours), of courses of college grade, in not less than
eighteen calendar months.

ADVANCED STANDING

Under the elective system of the University of Virginia, a student who has
completed courses of college or university grade in other institutions of learning
on mathematical or scientific subjects may be excused from attendance upon
these courses by the Dean, with the advice and consent of the professor in
charge, and will then be registered for the more advanced work, provided the
full entrance requirements have been satisfied.

In order to secure College Credit upon such courses toward a degree in
Engineering from this University, the applicant must show—

1. That the courses offered are coextensive with the corresponding courses
as given in the University of Virginia.

2. That his grades on them were not below the seventy-five per cent. pass-mark
of this University.

Such credits may be granted by the faculty upon the recommendation of
the Dean and the professors in charge; but are automatically revoked by the
failure of the student to pass in the more advanced courses in the related
topics.

Advanced standing in the technical engineering subjects of higher grade
than those of the Sophomore year will not be given except to graduates of other
institutions offering technical engineering instruction and then only upon special
consideration of each application for such advanced standing. No degree
in Engineering will be awarded for less than one full year's work in a regular
session of this University and the work of a candidate's last year must be performed
in residence here.

The same rules apply to Credits on Summer School Courses; except that
for courses in the Summer School of this University the examination questions
must be prepared by the professor in charge of the regular course, and the
answers must be read and graded by him.

Students, suspended from other universities, are not granted college credits
on courses previously passed, except upon the explicit recommendation of the
suspending university, and after such additional tests as this Engineering
Faculty may impose.

Credits on Practice-Courses in Drawing, Shop-work, or Field-work may
be granted to applicants who have gained in professional practice the training
which these courses represent. Such applicants must file with the Dean
proper certificates from the official under whom the work was done and must
in every case pass an additional practical test on the subjects for which credit
is desired.

College credit is not granted for high-school work.

PROGRAMS OF STUDY

The candidate who has satisfied the requirements for entrance as above
defined is matriculated as a student of Engineering and admitted to the Freshman
Class. The studies of this class comprise lecture courses in English,
Mathematics, Applied Mathematics, and Chemistry with associated laboratory
courses in Chemistry, Drawing, Shop-work and Field-work.

For advancement to the Sophomore Class the student must have completed
at least two-thirds of his Freshman work. Upon entering this class the student
majoring in Chemical Engineering begins his specialized work, while all others
pursue identical courses of study through the year. On entering the Junior
year each student elects his specialty. The courses thereafter diverge according
to the major subject chosen by the student. Programs of study for each
degree are given below.

The courses are so ordered that the specified entrance requirements are
adequate for the work of the Freshman Year. Each succeeding year presupposes
the completion of the work for all the foregoing years. Students are
advised to adhere strictly to the regular programs. The arrangements specified
in them have been carefully planned and are the best. Departures from the
curriculum will in almost every case produce conflicts in lecture hours or laboratory
periods and may cost the student a year's time. Haphazard election is discouraged
and in extreme cases will be prohibited. No student will be registered
for a course unless, in the opinion both of the Dean and of the professor, his
preliminary training has fitted him for the profitable pursuit of that course.

Students are especially advised against the attempt to crowd too many
studies into their scheme of work, and are warned that admission to advanced
courses will be granted only to those who have adequate mathematical and
scientific training to profit by them. Men overloaded with work, too great in
volume or in difficulty for their powers, suffer inevitable discouragement and
incur almost certain failure.

Changes of classes with transfer of fees may be made, subject to the approval
of the Dean, within two weeks after the beginning of any term. Thereafter
such changes may be made only by special order of the faculty, and then
without transfer of fees.

Upon the completion of the four years' course as defined in any one of the
Programs of Study, the faculty will award to any student in regular and honorable
standing the degree of Bachelor of Science in Engineering. Upon the
completion of the additional Graduate Course in a satisfactory manner the
faculty will award the appropriate degree of Civil Engineer, Mechanical Engineer,
Electrical Engineer, Chemical Engineer, or Mining Engineer.

The five-year curriculum has been adopted at the University of Virginia
in view of the impressive and growing demand from practicing engineers and
industrial leaders that Schools of Engineering should enlarge the field of study
to embrace more of the humanities and better opportunities for student research,
to the end that the graduates may be better fitted to undertake their duties
as engineers and citizens.

COURSES OF INSTRUCTION

The Subjects of Instruction in Engineering are grouped into classes, each
designated by a distinctive number for each term, the lecture and laboratory
courses being likewise differentiated. This grouping follows the arrangement
shown below:

Humanities	1 to 99
Mathematics	100 to 199
Physics	200 to 299
Chemistry	300 to 399
Geology	400 to 499
Applied Mathematics	500 to 599
Experimental Engineering	600 to 699
Civil Engineering including Field-work	700 to 799
Mechanical Engineering including Shop-work	800 to 899
Electrical Engineering	900 to 999

Lecture courses are listed in the first fifty numbers of all classes; laboratory
or practice courses are listed in the second fifty numbers of all classes. The same
numbers are used in schedules of lecture hours, laboratory periods and examination
days.

HUMANITIES

1-2-3: English:

12:30-1:30, M. W. F.

First and second terms: Advanced composition with parallel reading, with
particular attention to Description, Exposition, and Argument. Third term:
Survey of English literature with composition and parallel reading, with particular
attention to scientific writings. (Fall, Winter, Spring.)

Associate Professor H. P. Johnson. Mr. Vaughan and Mr. Church.

4-5-6: English Composition:

8:30-9:30, M. W. F.

An advanced course in English to be taken by Juniors in all courses and
chosen on the approval of the Faculty of Engineering. (Fall, Winter, Spring.)

Associate Professor Gordon.

10-11-12: Economics:

10:30-11:30, M. W. F.

First and second terms: Survey of the principles of economics. Third term:
The bearing of these principles upon present American conditions. Instruction
will be given by lectures, assigned readings, reports, and discussions. (Fall,
Winter, Spring.)

Optional course, for all except Chemical Engineering students, in place of
which a three-session-hour course in Modern Language (40-41-42), French,
German, Italian or Spanish may be chosen.

Professor Snavely, Mr. Biscoe and Mr. Simpson.

13-14-15: Commercial Law:

11:30-12-30, T. Th. S.

A detailed study of the fundamentals and important, rather than the technical,
principles of those subjects of which knowledge is necessary in ordinary
commercial transactions. (Fall, Winter, Spring.) Optional for Government
(16-17-18) or History (31-32-33).

Associate Professor Hulvey.

16-17-18: Government:

9:30-10:30, T. Th. S.

A description and comparison of the principles and essential features of the
governments of the United States, England, France, Germany, and Switzerland,
with especial emphasis on the characteristics of the American Constitutional
system and the operation of Congressional government. (Fall, Winter, Spring.)
Optional for Commercial Law (13-14-15) or History (31-32-33).

Acting Associate Professor Maddox.

21-22-23: Cost Accounting:

9:30-10:30, M. W. F.

Fall term: Theory and practice in General Accounting. Winter and Spring
terms: Application of accounting principles to various types of manufacturing
and engineering enterprises. (Fall, Winter, Spring.)

Professor Barlow and Mr. Graham.

26: Engineering Economics and Specifications:

11:30-12:30, T. Th. S.

Lectures, parallel reading and written work dealing with the economic
considerations involved in engineering problems and specifications for engineering
structures. Special emphasis is placed upon the general problem of economic
selection of methods, machinery and apparatus in the several engineering
fields. Questions of first cost, depreciation, rates for service, etc., will be
treated. Complete specifications are required from each student, subjects being
chosen particularly from the special field of study of each individual student.
(Winter.)

Professor Rodman.

31-32-33: History:

11:30-12:30, T. Th. S. or 12:30-1:30 M. W. F.

A college course in history to be chosen by the student and approved by
the Faculty of Engineering (Fall, Winter, Spring.) Optional for Commercial
Law (13-14-15) or Government (16-17-18).

Associate Professors Barr and T. C. Johnson.

34-35-36: Elective:

A graduate-year humanistic course chosen from Philosophy. Architecture,
Fine Art, or other subject approved by the Faculty of Engineering. (Fall,
Winter, Spring.)

40-41-42: Modern Language:

9:30-10:30, M. T. W. Th. F.

A college credit course in modern language chosen between French, German,
Italian and Spanish and upon approval of the student's major-subject professor.
(Fall, Winter, Spring.) An optional course, for all except Chemical
Engineering students, which may be taken in place of Economics (10-11-12).
Chemical Engineering students are required to take German for one year.

Professors Faulkner, Graham, Abbot and Assistant Professors Mohr,
Woody and Rinetti.

MATHEMATICS

100: Trigonometry:

9:30-10:30, T. Th. S.

A complete course in plane trigonometry is pursued with constant drill in
the solution of problems, and exercises in the use of logarithms. (Fall.)

Professor Luck, Mr. Wells and Mr. Weaver.

106: Analytical Geometry and College Algebra:

9:30-10:30, T. Th. S.

In this course Cartesian and polar coördinates are presented and applied
to the study of the straight line and the circle. The related college algebra
topics of determinants, the function notion with especial reference to the linear
function, the graphical representation of equations and of functions are also
considered. (Winter.)

Professor Luck, Mr. Wells and Mr. Weaver.

107: Analytical Geometry and College Algebra:

9:30-10:30, T. Th. S.

This course is a continuation of course 106. The conic is studied in its
particular and general forms. Especial attention is given to the solution of
numerous loci problems by the use of Cartesian and polar coördinates. The
study of related college algebra topics is continued. The quadratic function
of one and two variables, the theory of the quadratic equation in particular
and of equations in general are some of the topics considered. (Spring.)

Professor Luck, Mr. Wells and Mr. Weaver.

108-109-110: Calculus:

11:30-12:30, M. W. F.

A first course in the differential and integral calculus. This includes a
study of series and partial fractions. The principal emphasis is upon the applications
of the subjects to geometry, elementary kinematics and mechanical problems.
(Fall, Winter, Spring.)

Professor Echols, Associate Professor Saunders and Mr. R. L. H.
Echols.

111: Differential Equations:

12:30-1:30, T. Th. S.

An elementary course in differential equations with particular reference
to the differential equations of electrical engineering. (Fall.)

Associate Professor Saunders.

158-159-160 Mathematics Laboratory:

6 hours a week.

An intensive, supervised study of Calculus problems with extensive drill
in the solution and formation of the calculus forms with particular reference
to its use as a tool in the solution of physical and engineering problems. (Fall,
Winter, Spring.)

Associate Professor Saunders, Mr. Simpson and Mr. Harmon.

PHYSICS

200-201-202: Sophomore Physics:

9:30-10:30, M. W. F.

250-251-252: Physics Laboratory:

9:30-11:30, T. Th. S.

An elementary course in general physics consisting of lectures, lecture
demonstrations, recitations and laboratory exercises. (Fall, Winter, Spring.)

Associate Professor Brown and Assistants.

259: Electrical Laboratory:

2:30-5:30, Th.

This course deals particularly with the more precise electrical measurements
and the manipulation of instruments of precision used in the higher
grade of electrical testing and standardization. (Winter.)

Professor Hoxton and Associate Professor Brown.

CHEMISTRY

300-301-302: General Chemistry:

10:30-11:30, T. Th. S.

350-351-352: Chemistry Laboratory:

11:30-1:30, T. Th. S.

The fundamental principles and phenomena of inorganic, organic, and physical
chemistry, and the foundations of analytical chemistry. Most of the time
is devoted to inorganic phenomena. (Fall, Winter, Spring.)

Professor Carter, Assistant Professor Markham and Assistants.

306-307-308: Analytical Chemistry:

8:30-9:30, T. Th. S.

356-357-358: Analytical Chemistry Laboratory:

2:30-5:30. T. Th.

Chemistry 300-1-2 prerequisite.

(a) Qualitative Analysis. Fall and Winter terms, 3 hours of lecture and 6
hours of laboratory per week, devoted to the study of systematic qualitative
analysis. (b) Quantitative Analysis. Spring term, 2 hours of lecture and 9
hours of laboratory per week, devoted to elementary quantitative analysis. In
the lectures and recitation work special emphasis is given to the theoretical
foundations of analytical chemistry. (Fall, Winter, Spring.)

Professor Yoe and Assistants.

309-310-311: Organic Chemistry:

11:30-12:30, T. Th. S.

359-360-361: Organic Chemistry Laboratory:

2:30-5:30, T. Th.

Chemistry 300-1-2 prerequisite.

An introduction to the study of the compounds of carbon, including the
application of modern chemical theory to such compounds and their reactions.
(Fall, Winter, Spring.)

Professor Bird and Assistants.

318-319-320: Quantitative Analysis:

Lecture by appointment.

368-369-370: Quantitative Analysis Laboratory:

2:30-5:30, M. W.

Chemistry 306-7-8 prerequisite.

A course in the principles of quantitative analysis. The laboratory work
will include a study of characteristic procedures, illustrating gravimetric and
volumetric analysis. 1 hour of lecture and 6 hours of laboratory per week.
(Fall, Winter, Spring.)

Professor Yoe and Assistants.

321-322-323: Physical Chemistry:

12:30-1:30, M. W. F.

371-372-373: Physical Chemistry Laboratory:

2:30-5:30, T. Th.

Chemistry 306-7-8 prerequisite, as well as some knowledge of the Calculus and
previous training in Physics.

An introductory study of atomic structure theory, kinetic theory and the
principle of the conservation of energy form the foundations of the study of
gases, liquids, solids, solutions and rates of reaction. A brief study of the
direction of chemical change is then followed by the consideration of homogeneous
and heterogeneous equilibria. (Fall, Winter, Spring.)

Assistant Professor Spencer and Assistant.

324-325-326: Principles of Chemical Engineering:

10:30-11:30, M. W. F.

A course designed to give the prospective chemical engineer a thorough
foundation in the basic principles of his profession. The course is intended for
candidates for the Ch. E. degree, but may be taken by fourth-year students in
special cases. The unit operations of chemical industry are studied from the
standpoint of the chemical and physical principles involved. Practice in the
application of these principles is given by the solution of numerous type problems
in which quantitative treatment is emphasized. Attention is first devoted
to a detailed study of flow of fluids and flow of heat, since these topics are
fundamental in the subsequent development of evaporation, distillation, and
power generation. These subjects are followed by sub-division of solids, mechanical
separation, filtration, humidification, absorption, and extraction. Facility
is developed in the stoichiometry of chemical industry. Lectures and recitations,
3 hours a week. (Fall, Winter, Spring.)

Associate Professor Hitchcock.

340-341-342: Applied Chemistry:

9:30-10:30, M. W. F.

Chemistry 309-10-11 and 321-22-23 prequisite.

The lectures and recitations in this course will be devoted to the study of
fundamental principles underlying the more important phases of industrial
chemistry, including both theoretical and economic problems. A considerable
amount of reading in descriptive industrial chemistry will be assigned, and
written reports upon special subjects will be required. Lectures and recitations,
3 hours a week. (Fall, Winter, Spring.)

Associate Professor Hitchcock.

386-387-388: Chemical Engineering Research:

This course is designed for candidates for the Ch. E. degree and affords
an introduction to research methods. Fundamental problems will be selected for
study whenever possible from the field in which the student is particularly interested,
or from fields which are of importance in representative chemical industries
of the State, such as Rayon and Nitro-cellulose, Nitrogen Fixation,
Paper and Heavy Chemicals. The method of attack in general will be to reduce
the selected problem to laboratory scale leading to the collection of basic data
susceptible of definite interpretation, rather than to attempt special investigations
on semi-plant equipment which usually leads to merely empirical data. The use
of the chemical literature as an aid in conducting investigations accompanies
the laboratory work, as well as practice in the mathematical and graphical treatment
of the data obtained. (Fall, Winter, Spring.)

Associate Professor Hitchcock.

Advanced Courses: A number of advanced courses in Chemistry, not
listed above, are described in the catalogue of the College. When time permits,
students in Chemical Engineering, who are properly prepared, may take such of
these courses as are approved by the Faculty of Engineering.

The Chemical Journal Club will meet once a week (hour to be arranged)
for the critical review and discussion of various topics of interest in current
chemical literature and of such chemical researches as are in progress in the

University. All members of the teaching staff and advanced students in chemistry
are expected to participate in these meetings and to take part in the discussions.

GEOLOGY

400-401-402: Engineering Geology:

8:30-9:30, M. W. F.

450-451-452: Field and Laboratory:

6 hours a week.

A course of 3 lectures a week and 3 hours for private study. Special emphasis
is given to the study of common rock-forming minerals and rocks, building
stones and ores. The divisions of dynamical, structural and physiographical
geology are covered in considerable detail, and the practical applications of the
topics treated to engineering work are pointed out. (Fall, Winter, Spring.)

Professors Nelson, Roberts and Assistants.

403-404-405: Economic Geology:

10:30-11:30, M. W. F.

453-454-455: Field and Laboratory:

6 hours a week.

This course is designed to give a general but comprehensive account of the
origin, nature, distribution and uses of the metallic and non-metallic products of
the earth with especial reference to those of the United States. Lectures and
collateral reading, 6 hours a week. (Fall, Winter, Spring.)

Professor Nelson.

409-410-411: Advanced Economic Geology:

459-460-461: Field and Laboratory:

Hours by appointment.

Special topics in mining geology for advanced students, selected according
to the needs of the individual student. Lectures, laboratory and field work,
reading, reports and theses. (Fall, Winter, Spring.)

Professor Nelson.

412-413-414: Mineralogy:

8:30-9:30, T. Th. S.

462-463-464: Laboratory:

6 hours a week.

Crystallography, physical and chemical mineralogy, and descriptive mineralogy.
(Fall, Winter, Spring.)

Assistant Professor Pegau.

APPLIED MATHEMATICS

521: Plane Surveying:

10:30-11:30, M. W. F.

Lecture course: Theory, uses, and adjustments of compass, level, transit,
and stadia. Special methods of land, city, topographic and mining surveys. Survey
computation and maps. (Fall or Spring.)

571: Field course: Practical use of chain and tape, level, compass, transit,
and stadia. Field notes, records and reports. 6 hours a week.

Associate Professor Saunders and Assistants.

522: Mechanical Drawing:

10:30-11:30, M. W. F.

Lecture course: Plane problems, conic sections, graphic algebra. Projections
of prisms and pyramids; of cylinders, cones and spheres; of the plane
sections and intersections of solid bodies. (Fall or Winter.)

572: Practice course: Each week the student executes a finished plate
15″ × 20″ of exercises in mechanical drawing based on the lectures. 6 hours a
week.

Professor Thornton, Associate Professor Henderson and Assistants.

523: Descriptive Geometry:

10:30-11:30, M. W. F.

Lecture course: Fundamental problems on the point, line, and plane.
Projections, tangencies, and intersections of curved surfaces. Applications to
shades and shadows, problems in mining, and so on. (Winter or Spring.)

573: Practice course: Each student executes a weekly plate 15″ × 20″
of problems based on the lectures. 6 hours a week.

Professor Thornton, Associate Professor Saunders and Assistants.

524: Graphical Statics:

10:30-11:30, T. Th. S.

Lecture course: Graphic composition and resolution of forces; centers
of gravity and moments of inertia; strain sheets for simple types of roof and
bridge trusses; beams under fixed and rolling loads; reservoir dams and retaining
walls; internal stresses and beam deflections. (Fall.)

574: Practice course: Each student executes a weekly plate 15″ × 20″
of problems based on the lectures. 6 hours a week.

Professor Thornton, Mr. Stevenson and Mr. Petrescu.

525: Structural Drawing:

10:30-11:30, T. Th. S.

Lecture course: Graphic analysis of steel and timber trusses for roofs
and bridges; of solid beams and plate girder bridges; and of reinforced concrete
slabs, girders, columns, and retaining walls. (Spring.)

575: Practice course: Design and detailed drawings of simple examples
of roofs and bridges, with complete computations for each structure. 6 hours a
week.

Professor Thornton, Mr. Stevenson and Mr. Petrescu.

526: Elementary Mechanics:

12:30-1:30, T. Th. S.

Lecture course: Composition and resolution of forces; friction; problems
in equilibrium; rectilinear motion, circular motion, projectile motion. (Fall.)

576: Practice course: Solution of weekly problems in mechanics by
graphical and analytical methods. 6 hours a week.

Professor Thornton and Mr. Moore.

527: Applied Mechanics:

12:30-1:30, M. W. F.

Review of elementary mechanics; dynamics of a particle; moments of
inertia; revolving bodies; rolling bodies; theory of work and energy; collision of
elastic solids; dynamics of the Steam Engine.

Weekly problems are assigned for solution by graphical and analytical
methods. (Spring.)

Professor Thornton and Mr. Joachim.

528: Strength of Materials:

12:30-1-30, M. W. F.

Fundamental laws of stress and strain; straining actions and stresses in
ties and struts, beams and shafts, reinforced concrete slabs and girders; deflections
in simple, restrained and continuous girders; columns under axial and
eccentric loads. Laboratory courses 661-2-3. (Fall.)

Professor Thornton and Mr. Joachim.

529: Hydraulics:

12:30-1:30, T. Th. S.

Equilibrium of fluids, applied to the analysis and design of thin and thick
shells and pipes, dams and weirs: Motion of fluids and discharges from orifices,
weir notches, pipes, canals, and rivers. Principles of linear and angular
momentum with applications to the analysis and design of hydraulic motors
and pumps. Laboratory course 680. (Spring.)

Professor Thornton and Mr. Joachim.

Laboratory studies in Strength of Materials and Hydraulics are given in
the Classes in Experimental Engineering.

541-542-543: Mining:

11:30-12:30, M. W. F.

Mine Surveying and Prospecting (Fall); Exploitation of Mines (Winter);
Mining Machinery (Spring). This course is for Seniors and requires as a prerequisite
the completion of the studies of the first three years.

Professor —.

EXPERIMENTAL ENGINEERING

Lectures are given to explain the origin and manufacture of materials,
the design and operation of equipment, methods of conducting the tests, and the
calculation of the desired results from the data taken in the laboratory. The
work is done principally in the laboratories where special emphasis is laid upon
(1) a thorough understanding of the problem to be undertaken, (2) accuracy
in carrying out the investigation, (3) the presentation of the results in a report
which must meet the standards of professional practice.

650: Road Materials Testing:

6 hours a week.

Standard tests of Portland cement. Samples of stone are tested for specific
gravity, absorption, cementing value, toughness, resistance to abrasion, and compressive
strength. Asphalts and tars are tested for specific gravity, penetration.
melting point, volatilization, viscosity, flash point, fixed carbon. (Winter.)

Associate Professor Henderson.

661: Structural Materials Testing:

5 hours a week.

Tests of cement, timber and metals. A course for Electrical and Mechanical
Engineers, similar to 662 and 663 but arranged so as to cover all of the
work in one term. (Winter.)

Associate Professor Henderson and Mr. Joachim.

662: Structural Materials Testing:

5 hours a week.

Tests of sand; tests of fine and coarse aggregates; proportioning of concrete;

compression tests of concrete; tests of reinforced concrete beams; construction
of forms for concrete. For Civil Engineers. (Fall.)

Associate Professor Henderson.

663: Structural Materials Testing:

5 hours a week.

Continuation of Course 662. Tests of wires; tension, compression and torsion
tests of metals; tranverse tests of metals and timber; determination of the
Modulus of Elasticity of metals; autographic testing; impact tests of metals.
For Civil Engineers. (Winter.)

Associate Professor Henderson.

670: Fuel and Oil Testing:

5 hours a week.

Standard methods of sampling coal; proximate analysis of coal; determination
of the heating value of coal by the bomb calorimeter, with a study of the
cooling correction; the heating value of gas by the Junker calorimeter; determination
of heating value of liquid fuels; determination of specific gravity, flash
and boiling points, chill point, viscosity, carbon residue, and emulsification
value of oils. (Fall.)

Associate Professor Henderson and Mr. Joachim.

680: Hydraulic Testing:

5 hours a week.

The measurement of the flow of water by means of orifices and weir
notches; determination of the coefficient of friction for pipe and pipe elbows;
study of a piston water meter; tests of large and small Venturi meters; performance
tests of piston and centrifugal pumps; measurement of stream velocity
and discharge by means of current meter. (Spring.)

Associate Professor Henderson and Mr. Petrescu.

690: Power Laboratory:

5 hours a week.

The calibration and adjustment of gauges; calibration of thermometers,
planimeters, pyrometers, and indicators; flue gas analysis; steam quality tests;
valve setting; determination of clearances; tests of steam boilers; tests of a
steam engine. For Mechanical Engineers. (Fall.)

Associate Professor Henderson, Mr. Joachim and Mr. Petrescu.

691: Power Laboratory:

5 hours a week.

Continuation of Course 690. Complete tests of a gasoline engine; complete
tests of a steam engine; tests of a steam turbine with a study of methods of
correcting to standard conditions. The Power Test Code of the American
Society of Mechanical Engineers used. For Mechanical Engineers. (Winter.)

Associate Professor Henderson, Mr. Joachim and Mr. Petrescu.

692: Power Laboratory:

5 hours a week.

Continuation of Course 691. Tests of an air compressor; tests of a blower;
complete tests of a centrifugal pump, and other assigned tests. For Mechanical
Engineers. (Spring.)

Associate Professor Henderson, Mr. Joachim and Mr. Petrescu.

CIVIL ENGINEERING

701: Curves and Earthwork:

9:30-10:30, T. Th. S.

Lectures on simple circular, compound, reverse, transition and vertical
curves. The form of excavations and embankments, earthwork surveys, computation
of volumes, formation of embankments, computation of haul, cost of
earthwork, blasting. Practical problems covering work of lecture course. (Fall.)

Professor Newcomb and Mr. Brown.

703: Highway Engineering:

11:30-12:30, T. Th. S.

A study of highway economics, administration, legislation and organization.
The principles of highway location, surveying, mapping and design. The construction,
maintenance and characteristics of earth, sand-clay, gravel, and broken
stone roads. A study of bituminous materials. The construction, maintenance
and characteristics of bituminous macadam, bituminous concrete, asphalt, cement-concrete,
wood block, brick and stone block pavements. Sidewalks, curbs and
gutters. (Winter.)

Associate Professor Saunders.

705: Bridge Engineering:

9:30-10:30, T. Th. S.

A study of bridge stresses, the design and construction of selected types
of steel bridges. (Winter.)

Professor Newcomb.

707: Water Supply and Sewerage:

12:30-1:30. T. Th. S.

A study of the quality, sources, collection, conveyance, purification and distribution
of city water supplies; the drainage of houses and streets, the collection
and conveyance of sewage, the disposal of sewage, the construction and
maintenance of works. (Winter.)

Associate Professor Saunders.

715: Materials of Construction:

12:30-1:30, T. Th. S.

A descriptive study of the properties, characteristics and manufacture of the
materials used in engineering structures. Problems in estimating quantities and
costs. (Winter.)

Associate Professor Henderson and Mr. Moore.

716: Railway Engineering:

9:30-10:30, T. Th. S.

An intensive study of the location, construction, maintenance and operation
of steam railways. Special attention is given to questions of railway
economics. (Spring.)

Professor Newcomb.

718: Masonry Structures:

11:30-12:30, T. Th. S.

A study of the theory of reinforced concrete design. The design and construction
of selected types of masonry structures. Practical exercises in design
together with structural drawings. (Fall.)

Associate Professor Saunders.

719: Advanced Highway Engineering:

10:30-11:30, T. Th. S.

Highway engineering design. Theory and economics of highway transport

surveys. Highway transport economics, methods, legislation and management.
Highway traffic regulations. (Spring.)

Professor Newcomb and Instructor.

720: Structural Engineering:

10:30-11:30, T. Th. S.

An advanced course in the design and construction of engineering structures
of steel and masonry. The student will be required to design, detail and
prepare completed drawings of selected structures. (Fall.)

Professor Newcomb.

721: Design of Water Supply and Sewerage Systems:

9:30-10:30, T. Th. S.

The design, construction and operation of water supply and sewage systems.
The student will be required to make complete designs and prepare all necessary
plans and specifications. (Fall.)

Associate Professor Saunders.

722: Sanitary Engineering:

9:30-10:30, T. Th. S.

A study of water purification and sewage disposal. The design, construction
and operation of water purification works, and sewage disposal plants.
The student will be required to make complete designs and prepare all necessary
plans and specifications. (Spring.)

Associate Professor Saunders.

725: Civil Engineering Research:

This course will be devoted to intensive study and research planned to accord
with the student's individual choice of major topic of study in the graduate
year. (Spring.)

Professor Newcomb and Associate Professor Saunders.

PRACTICE COURSES

751: Railroad Surveying:

9 hours a week.

This course supplements 701, Curves and Earthwork. The class is divided
into squads, each squad making complete surveys, maps, profiles, and estimates
for a mile of located line. (Fall.)

Associate Professor Saunders and Mr. Brown.

755: Bridge Drafting:

12 hours a week.

This course accompanies 705, Bridges. Each student is required to make
complete design and detail drawings of one plate girder and one selected type
of bridge truss. (Winter.)

Professor Newcomb and Mr. Hunt.

MECHANICAL ENGINEERING

800: Elementary Applied Thermodynamics:

12:30-1:30, T. Th. S.

Physical units and their measurement. Properties of the permanent gases,
of steam, ammonia, and carbon dioxide. The transformation of heat energy
into mechanical work. The production of cold. (Spring.)

Associate Professor Henderson and Mr. Petrescu.

801: Elementary Applied Thermodynamics:

12:30-1:30, M. W. F.

An introduction to the design and performance of stokers, boilers and
boiler auxiliaries, steam engines and turbines, internal combustion engines, and
refrigerating plants. (Winter.)

Associate Professor Henderson and Mr. Petrescu.

802: General Thermodynamics:

11:30-12:30, M. W. F.

The molecular theory of gases. Properties of fluids. The laws of thermodynamics.
Carnot's cycle. Entropy. Standard cycles. Fluids in motion.
(Fall.)

Associate Professor Macconochie and Mr. Petrescu.

803: Applied Thermodynamics:

11:30-12:30, M. W. F.

Fuels and their combustion. Power plant equipment. The theory of the
steam engine and steam turbine. (Winter.)

Associate Professor Macconochie and Mr. Petrescu.

804: Applied Thermodynamics:

11:30-12:30, M. W. F.

The theory of the air compressor, internal combustion engine and mechanical
refrigerator. The production of very low temperatures. Gas turbines.
(Spring.)

Associate Professor Macconochie and Mr. Petrescu.

805-806-807: Advanced Applied Thermodynamics:

12:30-1:30, M. W. F.

Power plant design. Initial and operating costs. Types of equipment including
boilers, stokers, boiler house auxiliaries, steam engines and turbines, internal
combustion engines.

Opportunities will be offered for the study of power generators of industrial
plants and for keeping in touch with current research on fuels and in the
power field. (Fall, Winter, Spring.)

Associate Professor Macconochie.

810: Mechanical Technology:

8:30-9:30, M. W. F.

Production and properties of the chief materials of construction. Preparatory
processes. Molding, forging, rolling and stamping. The metallography
and heat treatment of iron and steel. Special and alloy steels. (Fall.)

Associate Professor Macconochie and Mr. Macdonald.

811: Machine Design:

8:30-9:30, M. W. F.

The application of basic principles to the design of simple machine elements.
Toothed wheels. Screw and worm gearing. Cams. Transmission systems.
(Winter.)

Associate Professor Macconochie and Mr. Macdonald.

812: Theory of Machines:

8:30-9:30, M. W. F.

Kinematic chains and linkages. Simple machines. Mechanisms possessing
some particular geometrical property. Higher and lower pairs. Velocities and
accelerations in mechanisms. (Spring.)

Associate Professor Macconochie and Mr. Macdonald.

820-821-822: Advanced Theory of Machines:

10:30-11:30, M. W. F.

Motion of rigid bodies. Velocity and acceleration diagrams. Inertia forces
in machine parts. Balancing. Mechanics of the gyroscope. Critical speeds and
vibrations. (Fall, Winter, Spring.)

Associate Professor Macconochie.

826: Industrial Management:

9:30-10:30, T. Th. S.

Organization and location. Layout, design and construction. Transportation,
heating and ventilation. Standardization. Fatigue. Human relations.
Operation studies. Wage plans and incentives. Budgeting and purchasing.
Inspection and production control. Costs. (Winter.)

Associate Professor Macconochie.

860-861-862: Engineering Drawing:

12 hours a week Fall; 8 hours a week Winter and Spring.

Design of simple elements of machines such as screws, bolts, nuts, keys and
cottered joints, riveted joints and connections, pipes and pipe joints, shafts and
shaft couplings, clutches, bearings and supports, thrust blocks, engine details.
General assembly from detail drawings. Original design of pump, machine tool,
et cetera.

Associate Professor Macconochie and Assistant.

SHOP-WORK

865: Pattern Shop:

3 hours a week.

Exercises in the use of hand and machine tools, including the saw, planer,
and center lathe. The production of simple patterns. (Fall or Spring.)

Associate Professor Macconochie and Assistants.

866: Machine Shop:

3 hours a week.

Exercises in turning, boring and screw cutting, machine tool operation, chipping,
filing and fitting at the bench. (Fall or Spring.)

Associate Professor Macconochie and Assistants.

Works Experience: Students of mechanical engineering are strongly
recommended to spend their summer vacations in the practice of their profession.
Wherever possible, arrangements will be made to facilitate this.

ELECTRICAL ENGINEERING

900: Elements of Electrical Engineering:

11:30-12:30, M. W. F.

Lectures treating fundamental principles of Electrical Engineering; basic
ideas and fundamental units discussed; magnetic circuits and continuous electric
currents treated in detail; electromagnetism carefully studied. Special attention
is given to the physical conceptions involved, and numerous assigned
problems exemplify and broaden the theoretical discussions. 3 hours per week
of supervised problem work. (Fall.)

Professor Rodman and Mr. Simpson.

901: Direct Current Machines:

11:30-12:30, M. W. F.

Lectures on the theory, construction, characteristics, and operation of direct

current generators and motors and the necessary apparatus required for the
proper management and control of these machines. The principles of testing
such machines are carefully discussed. Problems illustrating the methods of
calculation involved in continuous current circuits and practical examples from
standard engineering practice form an important part of the work. 3 hours per
week of supervised problem work. (Winter.)

Professor Rodman and Mr. Simpson.

902: Periodic Currents:

11:30-12:30, M. W. F.

Lectures on electrostatic phenomena, variable currents, alternating currents,
and alternating current circuits, both single and polyphase. A careful study
is made of circuits with periodic currents and their characteristics when resistance,
inductive reactance and capacity reactance are present in their various
combinations. Extensive problem work is required to facilitate the treatment
of simple and complex circuits. 3 hours of supervised problem work per week.
(Spring.)

Professor Rodman and Mr. Simpson.

903: Alternating Current Machinery:

10:30-11:30, M. W. F.

Lectures on balanced and unbalanced polyphase circuits and power measurements
followed by the treatment of theory, construction, characteristics, and
operation of synchronous alternating current generators. The principles of
testing such apparatus under various conditions of loading are discussed, and
assigned problem work illustrates the theory and practice. 3 hours per week
of supervised problem work. (Fall.)

Professor Rodman.

904: Alternating Current Machinery:

10:30-11:30, M. W. F.

This course is a continuation of 903. The lectures treat more particularly
transformers, synchronous motors and parallel operation of alternating current
generators. Methods of testing are outlined and graphical methods of calculation
and predetermination of operating characteristics are discussed. Problems
taken from engineering practice serve to broaden and fix the theoretical
deductions. 3 hours per week of supervised problem work. (Winter.)

Professor Rodman.

905: Alternating Current Machinery:

10:30-11:30, M. W. F.

This course is a continuation of 903-4. Lectures deal with the theory, construction
and operation of rotary converters, induction, series, and repulsion
motors. Problems are solved to clarify the theory. 3 hours of supervised problem
work per week. (Spring.)

Professor Rodman.

906: Illumination and Photometry:

11:30-12:30, T. Th. S.

Lectures on light, its physical properties; illuminants and their characteristics;
shades and reflectors; photometry, standards and apparatus; illumination
calculations for point and surface sources; principles of interior, exterior, decorative,
and scenic illumination. Problems illustrating computations necessary
for the consideration of the Illuminating Engineer are assigned. (Spring.)

Optional for Hydro-electric Engineering (920), or Electric Traction (907),
only one given in any year.

Professor Rodman.

907: Electric Traction:

11:30-12:30, T. Th. S.

Lectures on the various types of electric motors for traction purposes, controllers
and systems of control, brakes, rolling stock, track, train performance,
and electric railway economics. A discussion with problems of the complete
electrification system for electric railways, including generating apparatus, transmission,
sub-stations and equipment, distribution, and utilization of electrical
energy for car propulsion. (Spring.) Optional for Hydro-electric Engineering
(920), or Illumination and Photometry (906-956), only one given in any year.

Professor Rodman.

910: Direct Current Systems:

10:30-11.30, T. Th. S.

Lectures dealing with the fundamentals of electrical circuits and direct current
machinery. Problem work accompanies the lectures. The course is essentially
for the non-electrical engineering students. (Fall.)

Professor Rodman and Mr. Simpson.

911: Alternating Current Systems:

10:30-11:30, T. Th. S.

Lectures covering the fundamentals of alternating current circuits and machinery.
Brief expositions of the subjects of electric lighting and power fundamentals.
For non-electrical engineering students. (Winter.)

Professor Rodman and Mr. Simpson.

916-917-918: Advanced Alternating Current Machinery:

11:30-12:30, T. Th. S.

A more detailed study of advanced character dealing with alternating current
machinery under abnormal conditions of service with attention to the more
refined problems involved. Optional for Electrical Communication (940-941-942),
only one given in any year. (Fall, Winter, Spring.)

Professor Rodman.

920: Hydro-electric Engineering:

11:30-12:30, T. Th. S.

A course of lectures dealing with the fundamentals of hydro-electric engineering
from the consideration of rain-fall through the various steps of investigation
and construction to the finished plants, with especial emphasis on the
economic features of the problem. (Spring.) Optional for Illumination and
Photometry (906-956), or Electric Traction (907), only one given in any year.

Professor Rodman.

925: Electric Transients:

10:30-11:30, M. W. F.

A course dealing with transients as they are encountered in varied electric
circuits with regard to their production, behavior, and reduction to minimum
effects. (Fall.)

Associate Professor Miller.

930-931-932: Electric Power Transmission:

9:30-10:30, M. W. F.

A study of the problems involved in modern electric power transmission.
Treating the inductance and capacity of lines, aerial and underground; corona;
steady state solutions for short and long lines; production, effect, and calculation

of transient conditions with means of protecting against such phenomena.
(Fall, Winter, Spring.)

Associate Professor Miller.

940-941-942: Electrical Communication:

9:30-10:30, T. Th. S.

A course dealing with the general subject of electrical communication of
intelligence by wire and wireless telegraph and telephone with emphasis on the
theoretical details of the subject. Treatment of the various mechanisms and
circuits utilized with particular reference to the vacuum tube engineering. (Fall,
Winter, Spring.) Optional with Advanced A. C. Machinery (916-917-918), only
one given in any year.

Professor Rodman.

LABORATORY COURSES

950-951: Direct Current Laboratory:

5 hours a week.

This course supplements 900-1. The laboratory work is devoted to a study
of electrical instruments, their use and manipulation; simple electrical circuits
and study of direct current apparatus and its operation; characteristics of generators
and motors. (Winter, Spring.)

Associate Professor Miller and Mr. Rogers.

953-954-955: Alternating Current Laboratory:

5 hours a week.

This course supplements 902-3-4-5, dealing with measuring instruments for
alternating current circuits; series and parallel circuits and their characteristics;
polyphase circuits, balanced and unbalanced; and alternating current generator,
motor and transformer characteristics. (Fall, Winter, Spring.)

Associate Professor Miller and Mr. Rogers.

956: Photometric Laboratory:

2 hours a week.

This course accompanies 906. Photometric tests are made upon different
types of incandescent lamps. The operating characteristics of incandescent and
arc lamps are studied. Tests of illumination, interior and exterior, are carried
out. Study of photometric standards and devices. (Spring.)

Associate Professor Miller.

960-961: Electrical Laboratory:

5 hours a week.

This course supplements 910-11. The work of the first term is devoted
to direct current tests; the second term exercises are on alternating current
circuits and machines. (Winter, Spring.)

Associate Professor Miller and Mr. Rogers.

966-967-968: Advanced Electrical Machinery Laboratory:

4 hours a week.

This course supplements 916-17-18. Special tests are carried out with emphasis
upon original work by the student. (Fall, Winter, Spring.)

Professor Rodman and Associate Professor Miller.

975: Transient Laboratory:

4 hours a week.

A course supplementing 925. It deals largely with oscillographic study of
illustrative transient circuit phenomena of varied types. (Fall.)

Associate Professor Miller.

980-981: Electric Power Transmission Laboratory:

4 hours a week.

A course supplementing 930-1-2 and dealing with certain phenomena encountered
in transmission circuits as they may be subjected to test on artificial lines.
(Winter, Spring.)

Associate Professor Miller.

990-991-992: Electrical Communication Laboratory:

4 hours a week.

A course supplementing 940-1-2 and devoted to various special tests of communication
circuits and apparatus. (Fall, Winter, Spring.)

Professor Rodman and Associate Professor Miller.

STUDENT BRANCHES OF NATIONAL PROFESSIONAL SOCIETIES

There have been established at the University of Virginia Student Branches
of the American Institute of Electrical Engineers (1912), the American Society
of Civil Engineers (1921) and the American Society of Mechanical Engineers
(1922). These societies hold regular meetings for the discussion of periodical
literature and the exposition by resident and visiting engineers of the presentday
problems in Engineering. A valuable feature of the meetings is the opportunity
presented for practice in public speaking and debate. At stated meetings
the Branches hold joint sessions for the discussion of mutually interesting
questions.

TAU BETA PI

In May, 1921, a chapter of the National Honorary Engineering Fraternity
Tau Beta Pi was granted and the Alpha of Virginia Chapter of Tau Beta Pi
will henceforth serve to further inspire high scholarship and integrity. This
fraternity is recognized as the leading honorary engineering fraternity of this
country and its chapters are found in a limited number of engineering schools
of the highest standing. The members are elected with care and the standards
maintained are rigid both in respect to scholarship and character.

THETA TAU

In June, 1923, a chapter of the National Engineering Fraternity of Theta
Tau was granted at the University of Virginia. This fraternity has chapters
in a score or more of the leading engineering schools of the country and membership
is eagerly sought and greatly appreciated by the members of the student
body. Elections are made each year based on scholarship and general record
of ability and promise of future service to the profession of engineering.

TRIGON SOCIETY

The Trigon Engineering Society was founded at the University of Virginia
early in the spring of 1923. It is a local organization which has for its
object the broadening of the education of the engineering student by fraternal
and social contact and by encouraging lectures and study on subjects aside
from those dealing primarily with engineering. The society is active in the
student affairs of the department and is always ready to help in any undertaking
for the betterment of the Engineering School. Members are selected
for their personality, sociability, and promise of high engineering attainment.

JONES AND BARKSDALE MEMORIAL FUNDS

A gift to the Department of Engineering from Messrs. Arthur P. Jones,
William Barham Jones (B.A. 1907) and Major Kenneth S. Jones (B.A., LL.B.,
C.E. 1915, Major U. S. A., Engineer Corps) in memory of their father, the
late Walter H. Jones of Norfolk, Va., and of his deep interest in the University
of Virginia, in the form of an endowment fund has made it possible to provide
a considerable number of professional periodicals representing the various
engineering activities. A gift to the Department of Engineering from
Mrs. Hamilton Barksdale in memory of her husband, an alumnus of the Engineering
Department, specifically donated for the purpose of building up the
department library, will make possible at once much needed changes and additions
to the library.

ENGINEERING CURRICULUM

	Freshman All courses	Sophomore All except Chemical	Sophomore Chemical
	English 1-2-3	[1] Calculus 108-9-10	[1] Calculus 108-9-10
	Math. 100-106-107	[1] Physics 200-1-2	[1] Physics 200-1-2
	[1] Chem. 300-1-2	Engrg. 526-715-800	Engrg. 526-715-800
	[1] Ap. Math. 521-2-3	Com. Law 13-14-15 or	[1] Anal. Chem. 306-7-8
	[1] Field-work 571	Govt. 16-17-18 or
	[1] Shop-work 865-6	Hist. 31-32-33
	L. F. $55	L. F. $15	L. F. $40
	Junior	Senior	Graduate
Civil	English 4-5-6	Cost Acct. 21-2-3	[1] Eng. Geol. 400-1-2
	[1] Ap. Math. 524-9-5	Ap. Math. 527-8	[1] Elec. Sys. 910-11
	C. E. 701-3-7	[1] Exp. Engrg. 662-3-80	Engrg. Econs. and Spec. 26
	[1] Exp. Engrg. 650	C. E. 718-5-16	Elective 34-5-6
	Econs. 10-11-12 or	[1] Ry. Field-work 751	Option: C. E. 720-19 or
	Mod. Lang. 40-1-2	[1] Bridge Drafting 755	C. E. 721-22
		M. E. 801	C. E. Research 725
	L. F. $15	L. F. $35	L. F. $10
Mechanical	English 4-5-6	Cost. Acct. 21-2-3	M. E. 805-6-7
	[1] Ap. Math. 524-9-5	Ap. Math. 527-8	M. E. 820-21-22
	M. E. 802-3-4	[1] Exp. Engrg. 670-61-80	M. E. 826
	[1] Exp. Engrg. 690-1-2	[1] M. E. 810-11-12	C. E. 719
	Econs. 10-11-12 or	[1] Elec. Sys. 910-11	Engrg. Econs. and Spec. 26
	Mod. Lang. 40-1-2		Elective 34-5-6
	M. E. 801
	L. F. $25	L. F. $40	L. F. $00
Electrical	English 4-5-6	Cost Acct. 21-2-3	E. E. [1] 930-[1] 1-2
	[1] Ap. Math. 524-9-5	Ap. Math. 527-8	Option: E. E.[1] 906
	E. E. 900-1-2	[1] Exp. Engrg. 670-61-80	or 920 or 907
	Math. 111	E. E. 903-4-5	[1] Phys. 259
	[1] E. E. Lab. 950-1	[1] E. E. Lab. 953-4-5	Engrg. Econs. and Spec. 26
	Econs. 10-11-12 or	M. E. 801	[1] E. E. 925
	Mod. Lang. 40-1-2		Option: [1] E. E. 916-17-18
			or [1] E. E. 940-1-2
			Elective 34-5-6
	L. F. $20	L. F. $30	L. F. $35
Chemical	English 4-5-6	Cost. Acct. 21-2-3	Chem. Engrg. 324-5-6
	[1] Ap. Math. 524-5	[1] Quan. Anal. 318-19-20	Ap. Chem. 340-1-2
	[1] Org. Chem. 309-10-11	[1] Phys. Chem. 321-22-23	Engrg. Econs. and Spec. 26
	German 40-1-2	[1] Elec. Sys. 910-11	Elective 34-5-6
	M. E. 801	Ap. Math. 529	[1] Chem. Engrg. Research
		[1] Exp. Engrg. 680	386-7-8
	L. F. $35	L. F. $65	L. F. $25
Mining	English 4-5-6	Cost Acct. 21-2-3	[1] Mineralogy 412-13-14
	[1] Ap. Math. 524-5	[1] Elec. Sys. 910-11	[1] Adv. Econ. Geol. 409-10-11
	[1] Engrg. Geol. 400-1-2	Ap. Math. 529	Engrg. Econs. and Spec. 26
	Econs. 10-11-12 or	[1] Exp. Engrg. 680	Elective 34-5-6
	Mod. Lang. 40-1-2	[1] Econ. Geol. 403-4-5	[1] Anal. Chem. 306-7-8
	M. E. 801	Mining 541-2-3
	L. F. $15	L. F. $15	L. F. $30

[1]

Starred courses involve laboratory work.

L. F.—Laboratory Fees.

SCHEDULE OF FOUR-YEAR COURSES

CLASSES					LECTURES		LABORATORY
	C—lectures per wk. S-H—session hours.	C	L	S-H	M. W. F.	T. Th. S.
	L—hrs. of practice per wk.	C	L	S-H	M. W. F.	T. Th. S.
Freshman	English (1-2-3)	3		3	12:30-1:30
	Math. (100-106-107)	3		3		9:30-10:30
	Gen. Chem. (300-301-302)	3	6	6		10:30-11:30	11:30-1:30, T. Th. S.
	Ap. Math. (521-522-523)	3	6	6	10:30-11:30		8:30-10:30, M. W. F.
	Field-work (571)						6 h. a. w.
	Shop-work (865-866)		3	1			3 h. a. w.
Sophomore	Com. Law (13-14-15) or Govt. (16-17-18)	3		3		11:30 or 9:30
	or History (31-32-33)	3		3	12:30-1:30	or 11:30-12:30
	Math. (108-109-110)	3	6	6	11:30-12:30		2:30-4:30, M. W. F.
	Physics (200-201-202)	3	6	6	9:30-10:30		9:30-11:30, T. Th. S.
	Anal. Chem. (306-307-308)	3	6	6		8:30-9:30	2:30-5:30, T. Th.
	Engrg. (526-715-800)	3		4		12:30-1:30
Junior	Eng. (4-5-6)	3		3	8:30-9:30
	Econs. (10-11-12) or	3		3	10:30-11:30
	Mod. Lang. (40-41-42) M. T. W. Th. F.	5		3	9:30-10:30
	Math. (111) Fall	3		1		12:30-1:30
	Org. Chem. (309-310-311)	3	6	6		11:30-12:30	2:30-5:30, T. Th.
	Engrg. Geol. (400-401-402)	3	6	6	8:30-9:30		6 h. a. w.
	Ap. Math. (524-525)	3	6	5		10:30-11:30	8:30-10:30, T. Th. S. Fall and Spring
	Ap. Math. (529)	3		2		12:30-1:30
	Civil Engrg. (701)	3		1		9:30-10:30
	Civil Engrg. (703)	3		1		11:30-12:30
	Civil Engrg. (707)	3	6	2		12:30-1:30	6 h. a. w. Winter
	Mech. Engrg. (802-803-804)	3		3	11:30-12:30
	Mech. Engrg. (801)	3		1	12:30-1:30
	Elec. Engrg. (900-901-902)	3	3	4½	11:30-12:30		2:30-5:30, M.
	Exp. Engrg. (650)		6	1			6 h. a. w. Winter
	Exp. Engrg. (690-691-692)	1	4	3		11:30-12:30, T.	2:30-6:30, T. or Th.
	Elec. Lab. (950-951)	1	4	2		11:30-12:30, S.	2:30-6:30, T. or W. or Th. Winter & Spring
Senior	Cost Accounting (21-22-23)	3		3	9:30-10:30
	Phys. Chem. (321-322-323)	3	6	6	12:30-1:30		2:30-5:30, T. Th.
	Quant. Anal. (318-319-320)	1	6	3	1 hr. to be arranged		2:30-5:30, M. W.
	Econ. Geol. (403-404-405)	3	6	6	10:30-11:30		6 h. a. w.
	Ap. Math. (528-527)	3		4	12:30-1:30
	Mining (541-542-543)	3		3	11:30-12:30
	Civil Engrg. (705-716)	3	12	4		9:30:10:30	12 h. a. w. Spring
	Civil Engrg. (718)	3	6	2		11:30-12:30	6 h. a. w. Fall
	Mech. Engrg. (810-811-812)	3		3	8:30-9:30
	Elec. Engrg. (903-904-905)	3	3	4½	10:30-11:30		2:30-5:30, Th.
	Elec. Engrg. (910-911)	3		2		10:30-11:30
	Exp. Engrg. (662-663)	1	4	2		11:30-12:30, W.	2:30-6:30, M. or W. or F.
	Exp. Engrg. (670-661-680)	1	4	3		11:30-12:30, S.	2:30-6:30, M. or W. or F.
	Ry. Field-work (751)		9	1½			9 h. a. w. Fall
	Bridge Draw. (755)		12	2			12 h. a. w. Winter
	Engrg. Drawing (860-861-862)		12 or 8	3			12 h. a. w. Fall; 8 h. a. w. Winter & Spring
	Elec. Lab. (953-954-955)	1	4	3		11:30-12:30, Th.	2:30-6:30, M. or W. or F.
	Elec. Lab. (960-61)	1	4	2		11:30-12-30, T.	2:30-6:30, M. or F. Winter and Spring

CURRICULUM IN CIVIL ENGINEERING

	Humanities	Mathematics and Science	Technical Engineering
Freshman	English: Rhetoric Composition Survey of Literature	Mathematics: Trigonometry Analytical Geometry and College Algebra Chemistry	Plane Surveying Mechanical Drawing Descriptive Geometry Drawing Laboratory Field-work Shop-work
Sophomore	Options: History or Government or Commercial Law	Mathematics: Differential and Integral Calculus Physics Mathematics Laboratory	Elementary Mechanics Materials of Construction Elem. Ap. Thermo.
Junior	English Composition Options: Economics or Modern Language	Graphical Statics Structural Drawing Hydraulics Drawing Laboratory	Curves and Earthwork Highways Water Supply and Sewerage Road Materials Tests
Senior	Cost Accounting	Applied Mechanics Strength of Materials Mechanics Laboratory	Elem. Ap. Thermo. Masonry Bridges Railways Bridge Drafting Railway Surveying
Degree of B.S. in Engineering on completion of Four-Year Course.
Graduate	Elective: Philosophy or Architecture or Fine Arts or other subject approved by the Faculty of Engineering	Engineering Geology	Engineering Economics and Specifications Option: Advanced Structural Engineering and Highways or Advanced Water Supply and Sewerage Electric Systems C. E. Research
Degree of C.E. on completion of additional Graduate Course.

Practice courses are printed in Italics; courses with combined lectures and laboratory work in
Black Face Type.

CURRICULUM IN MECHANICAL ENGINEERING

	Humanities	Mathematics and Science	Technical Engineering
Freshman	English: Rhetoric Composition Survey of Literature	Mathematics: Trigonometry Analytical Geometry and College Algebra Chemistry	Plane Surveying Mechanical Drawing Descriptive Geometry Drawing Laboratory Field-work Shop-work
Sophomore	Options: History or Government or Commercial Law	Mathematics: Differential and Integral Calculus Physics Mathematics Laboratory	Elementary Mechanics Materials of Construction Elem. Ap. Thermo.
Junior	English Composition Option: Economics or Modern Language	Graphical Statics Structural Drawing Hydraulics Drawing Laboratory	Elem. Ap. Thermo. General and Applied Thermodynamics Power Testing
Senior	Cost Accounting	Applied Mechanics Strength of Materials Mechanics Laboratory	Mechanical Technology Machine Design Theory of Machines Electric Systems
Degree of B.S. in Engineering on completion of Four-Year Course.
Graduate	Elective Philosophy or Architecture or Fine Arts or other subject approved by the Faculty of Engineering		Adv. Theory of Machines Adv. Ap. Thermo. Industrial Management Engineering Economics and Specifications Highway Transport
Degree of M.E. on completion of the additional Graduate Course.

Practice courses are printed in Italics; courses with combined lecture and laboratory work in
Black Face Type.

CURRICULUM IN ELECTRICAL ENGINEERING

	Humanities	Mathematics and Science	Technical Engineering
Freshman	English: Rhetoric Composition Survey of Literature	Mathematics: Trigonometry Analytical Geometry and College Algebra Chemistry	Plane Surveying Mechanical Drawing Descriptive Geometry Drawing Laboratory Field-work Shop-work
Sophomore	Options: History or Government or Commercial Law	Mathematics: Differential and Integral Calculus Physics Mathematics Laboratory	Elementary Mechanics Materials of Construction Elem. Ap. Thermo.
Junior	English Composition Option: Economics or Modern Language	Mathematics: Differential Equations Graphical Statics Hydraulics Structural Drawing Drawing Laboratory	Elements of Electricity Direct Cur. Machinery Periodic Currents Electrical Laboratory Supervised Problem Work
Senior	Cost Accounting	Applied Mechanics Strength of Materials Mechanics Laboratory	Elem. Ap. Thermo. Alternating Current Machinery Electrical Laboratory Supervised Problem Work
Degree of B. S. in Engineering on completion of Four-Year Course.
Graduate	Elective: Philosophy or Architecture or Fine Arts or other subject approved by the Faculty of Engineering	Electrical Measurements	Electric Power Engineering Economics and Specifications Electric Transients Option: Illumination and Photometry or Hydro-electric Engineering or Electric Traction Option: Adv. Alternating Current Machinery or Electrical Communication
Degree of E. E. on completion of the additional Graduate Course.

Practice courses are printed in Italics; courses with combined lecture and laboratory work in
Black Face Type.

CURRICULUM IN CHEMICAL ENGINEERING

	Humanities	Mathematics and Science	Technical Engineering
Freshman	English: Rhetoric Composition Survey of Literature	Mathematics: Trigonometry Analytical Geometry and College Algebra Chemistry	Plane Surveying Mechanical Drawing Descriptive Geometry Drawing Laboratory Field-work Shop-work
Sophomore		Mathematics: Differential and Integral Calculus Physics Analytical Chemistry Mathematics Laboratory	Elementary Mechanics Materials of Construction Elem. Ap. Thermo.
Junior	English Composition German	Organic Chemistry Graphical Statics Structural Drawing Drawing Laboratory	Elem. Ap. Thermo.
Senior	Cost Accounting	Quantitative Analysis Physical Chemistry Hydraulics Hydraulics Laboratory	Electric Systems
Degree of B.S. in Engineering on completion of Four-Year Course
Graduate	Elective: Philosophy or Architecture or Fine Arts or other subject approved by the Faculty of Engineering	Applied Chemistry Chemical Engineering Research	Chemical Engineering Principles Engineering Economics and Specifications
Degree of Ch.E. on completion of the additional Graduate Course.

Practice courses are printed in Italics; courses with combined lecture and laboratory work in
Black Face Type.

CURRICULUM IN MINING ENGINEERING

	Humanities	Mathematics and Science	Technical Engineering
Freshman	English: Rhetoric Composition Survey of Literature	Mathematics: Trigonometry Analytical Geometry and College Algebra Chemistry	Plane Surveying Mechanical Drawing Descriptive Geometry Drawing Laboratory Field-work Shop-work
Sophomore	Options: History or Government or Commercial Law	Mathematics: Differential and Integral Calculus Physics Mathematics Laboratory	Elementary Mechanics Materials of Construction Elem. Ap. Thermo.
Junior	English Composition Option: Economics or Modern Language	Graphical Statics Structural Drawing Drawing Laboratory Engineering Geology	Elem. Ap. Thermo.
Senior	Cost Accounting	Economic Geology Hydraulics Hydraulics Laboratory	Electric Systems Mining
Degree of B.S. in Engineering on completion of Four-Year Course
Graduate	Elective: Philosophy or Architecture or Fine Arts or other subject approved by the Faculty of Engineering	Advanced Economic Geology Mineralogy Analytical Chemistry	Engineering Economics and Specifications
Degree of E.M. on completion of the additional Graduate Course.

Practice courses are printed in Italics; courses with combined lecture and laboratory work in
Black Face Type

LECTURE HOURS AND EXAMINATION DAYS 1929-1930

MONDAY, WEDNESDAY, FRIDAY					TUESDAY, THURSDAY, SATURDAY
Exam. Day				Lecture Hour		Exam. Day
Fall	Winter	Spring				Fall	Winter	Spring
VII	VI	V	English (4-5-6)	8:30 to 9:30		VIII	VII	VI
			Mech. Engineering (810-811-812)		Anal. Chemistry (306-307-308)
			Engrg. Geology (400-401-402)
III	II	I	Cost Accounting (21-22-23)	9:30 to 10:30	Government (16-17-18)	IV	III	II
			Modern Languages (40-41-42)		Mathematics (100-106-107)
			Physics (200-201-202)		Civil Engineering (701-705-716)
II	I	X	Applied Mathematics (521-522-523)	10:30 to 11:30	Applied Mathematics (524-x-525)	IX	VIII	VII
			Economics (10-11-12)		General Chemistry (300-301-302)
			Elec. Engineering (903-904-905)		Elec. Engineering (910-911-x)
X	IX	VIII	Elec. Engineering (900-901-902)	11:30 to 12:30	Organic Chemistry (30-310-311)	I	X	IX
			Mathematics (108-109-110)		Civil Engineering (718-703-x)
			Mech. Engineering (802-803-804)		Commercial Law (13-14-15)
					History (31-32-33)
VI	V	IV	Applied Mathematics (528-x-7)	12:30 to 1:30	Applied Mathematics (x-x-529)	V	IV	III
			English (1-2-3)		Civil Engineering (x-707-x)
			Mech. Engineering (x-801-x)		Engineering (526-715-800)
			Physical Chemistry (321-322-323)		Mathematics (111-x-x)

The examination days for the various classes are fixed
by the hour of regular lecture period. The examination day
for a particular course is indicated in the table above by
the Roman numeral in the first or last columns, for the
corresponding lecture hours in the middle column. The
examination period covers ten days at the end of each term.
Examination days change each term.

A change in lecture for any course will change the examination
day correspondingly. Classes for which lecture
periods are not indicated will have examination days fixed
by the arranged lecture hour in accordance with above
schedule.

EXPENSES OF REGULAR STUDENTS

The average annual expense of a student who pursues the regular course
in Engineering will be:

	NonVirginians	Virginians
University Fee	$ 60	$ 50
Tuition	165	95 (avg.)
Laboratory Fees (average)	35	35
Living Expenses (for nine months)	400	400
Books and Drawing Materials	30	30
Incidental Expenses (for nine months)	60	60
Total annual for average conditions	$750	$670

The charges for Tuition are uniform to all students, except that Virginians
are relieved of tuition on courses offered in the College, this exception
saving regular Freshmen from Virginia $110 and all other Virginia students
$60 each year in comparison with non-Virginians.

The laboratory charges are $15 per class for the year's course in Physics,
and $20 per class for a year's course in Chemistry. A deposit for breakage of
$5 is required for each laboratory course in Chemistry. A fee of $5 each
for the year's course in Engineering Geology and in Mineralogy is charged.
The fee for each practice course in the Engineering Department, Drawing,
Engineering Laboratories, and Shop-work is $5 per term for each course.
The fees for Field-work and Bridge Drafting are each $10 per term per course.
These fees include all charges for laboratory materials; but the student is
held further responsible for breakage.

The Living Expenses include board, lodging, fuel and lights, servant and
laundry; the average is $10.00 per week, the minimum $7.50, and a reasonable
maximum $12.50. Books and Drawing Materials will cost about $120 for the
four-year course. Incidental Expenses ought to be kept within modest bounds;
the above estimate is sufficient; large allowances of pocket money promote
idleness and attract companions of the baser sort. No allowances are included
for clothing and travel, the expenses for which vary too much to be
introduced into any general estimate.

The charges payable on entrance are the University Fee, and the Tuition
and Laboratory Fees.

LOAN FUNDS AND STUDENT SELF-HELP

The University is in possession of funds from which loans are made to
deserving students in need of such assistance. An account of these loans is
given in the General Catalogue. Inquiries concerning them should be addressed
to the Bursar.

Opportunities for obtaining remunerative employment are afforded to students
who are desirous by this means of partially paying their way through
the University. It is difficult to give definite assurance of employment to a
student before he reaches the University, but it may be stated that any student
with sufficient resources to carry him through the first half of the session

can be reasonably sure of obtaining work which will help defray his expenses
for the rest of the academic year. Information as to employment may be obtained
from the Secretary of the Committee on Student Help, Madison Hall,
University, Virginia.

EXAMINATION AND REPORTS

Oral Examinations are held at the beginning of each lecture hour on the
topics of the preceding lecture. Written test papers are set monthly, or at
such interval as the professor may appoint. Absences from lecture except by
reason of sickness are not excused without a written leave from the Dean.
Class standing is determined on the basis of the oral examinations and the
written tests. Absence from the latter or failure to answer incurs a zero
grade. Absences from laboratory periods, however caused, must be made up
by special private arrangement with the instructor.

Written Examinations are held at the end of each term on the entire
work of that term. The result of examination combined with the student's
class-standing gives his term-grade. The pass-mark is seventy-five per cent.
Absence from the written term examination incurs a zero term-grade, which
may not be removed except by the passage of a special written examination
on the work of that term. Such special examinations are granted only upon
presentation of a written certificate from a reputable physician that the
student by reason of sickness on the day of the regular examination was
unable to attend.

Regular Reports are sent out at the end of every term to the student's
parent or guardian. These state for each course followed the term-grade.
Further comment may be added by the Dean or the professor, if it appears
probable that such comment would be helpful to the student. Parents are
urged to examine these reports carefully and to exert such parental influence
as may seem needed to establish and confirm the student in habits of industry
and order.

Special Reports are sent to parents at the end of each month for students
delinquent in attendance or studiousness and for delinquents only. When a
student is making steady progress and showing due diligence in his work
only the regular reports are sent. The receipt of a special report is evidence
that, in the judgment of the faculty, prompt and pointed parental admonition
is urgently needed.

If in any class in the Department of Engineering a student fails to make
satisfactory progress, he is first admonished by the professor in charge. In
default of prompt and permanent improvement, he is next formally warned
by the Dean. If due amendment is then not immediately effected, the student's
name is dropped from the rolls of the Department, on the ground that he is
not accomplishing the purposes for which he should have entered upon a
University course of study.

REGULATIONS

The following regulations, adopted to define the policy of the faculty, are
published for the information and guidance of the students:

1. Practice-courses as well as lecture-courses must be conducted under

the Honor System. The student who submits any work to be graded is considered
to submit it under pledge.

2. When the lecture-course and the associated practice-course are given
in the same term of the same year, no student will be admitted to examination
on the lecture-course until he has completed at least three-fourths of the
practice-course.

3. No student will be admitted to any practice-course unless he is at the
same time pursuing the associated lecture-course, or has already received
credit for the same.

4. No student will be admitted to the graduating examination on a lecture-course
unless he has been present at more than half the lectures in that course.

5. In the technical courses in Engineering (i. e., courses not given in the
College) term-grades shall not be averaged; except that the term-grades for
Freshman Applied Mathematics may be averaged for the first-year men only,
provided no mark is below 65.

6. The pass-mark in every course is 75. Class standing and written examination
are combined for the term-grade in such proportions as the several
professors may determine.

7. No student who fails to make 75 on term-grade shall be granted another
examination on the course until he has again attended lectures on that course.

8. Special examinations are not given except by reason of sickness on the
day of examination, attested by the written certificate of a reputable physician,
or for other like providential causes. In every case they must be validated by
special vote of the faculty.

9. Any engineering student who fails to attain a passing grade of 75 on at
least 9 term-hours will be placed on probation for the following term, probation
to continue until at least 9 term-hours are passed in one term. No engineering
student shall remain on probation for more than three terms, whether
consecutive or not, in his entire engineering course. If probation is imposed
a fourth time the student shall be suspended.

10. Any engineering student on probation who fails to attain a passing
grade of 75 on at least 6 term-hours and whose average grade on all courses
taken is less than 65 will be suspended. Any engineering student who passes
less than 6 term-hours and whose average grade on all courses taken is less
than 65 will be suspended. Suspension during a session continues for the remainder
of the regular session. Suspension imposed at the end of a session
holds for the whole of a subsequent session, except that such suspension may
be absolved by the successful completion of prescribed work in the Summer
Quarter. No engineering student suspended for a second time shall re-enter
the department.

11. The Dean's List.—A student, who, in any session, passes on all courses
taken, aggregating not less than 18 session-hours, with an average grade on all
courses of not less than 82 per cent, will be placed on the Dean's list. A student,
who, in any session, passes on all courses taken aggregating not less than
18 session-hours, but who does not average 82 per cent, and who, in any subsequent

term, passes on all courses taken, aggregating not less than 18 term-hours,
with an average grade on all 18 term-hours of not less than 82 per cent
will be placed on the Dean's List. A student will be automatically dropped
from the Dean's List, if, in any term, he does not pass on all courses taken,
aggregating not less than 18 term-hours, with an average grade on all courses
of not less than 82 per cent. A student dropped from the Dean's List will be
again placed on it if he meets the above mentioned standard for a term. A
student on the Dean's List is not subject to the regulations limiting the issuance
of leaves of absence from the University, nor does absence from any
class entail on such student any penalty, affecting class standing, imposed for
absence alone. Students on the Dean's List must attend all laboratory classes
and must perform all written problem work and take all written quizzes under
the same conditions as all other students.

DRAFTING ROOMS

The Drafting Rooms are abundantly lighted and are provided with solidly
constructed tables with locked drawers for instruments and materials. Each
student is assigned to a table and has a drawer for his exclusive use. The
regular Drawing Classes execute each one plate a week under the supervision
of the Instructors in Drawing. The more advanced students have such additional
drawings assigned by their respective professors as are needed for the
full development of the courses of study.

Careful attention is given to the training of the students in free-hand lettering,
in the conventional signs of mechanical drawing, in the proper layout
of drawings, and in neat and accurate execution. Exercises are required also
in tracing and in blue-printing, the rooms for which are conveniently arranged
and in close contiguity to the drafting rooms. A vertical blue-printing machine
with ar lamp, complete with trays, has recently been procured and installed.
While, however, technical dexterity is demanded, the graphical method
is taught and used primarily as an indispensable instrument of research, the
thoughtful mastery of which is essential for the instructed Engineer.

The construction and theory of the Polar Planimeter, the Slide Rule, and
the Pantograph are carefully taught, and the student is trained in the practical
use of these appliances for the rapid and accurate production of estimates and
copies from finished drawings.

SHOPS

The Machine Shop is provided with six first-class engine lathes, illustrating
the practice of the best American makers; with a planer, a shaper, two drill
presses, a universal milling machine (Brown & Sharpe), and a universal grinder
(same makers); also with a gas forge for tempering tools, a cut-off saw for
metal rods, an emery wheel, grindstone, and so on.

The Wood Shop is furnished with five small lathes, a large pattern-maker's
lathe, a jointer, a planer, a saw bench for slitting and cross-cutting, a bandsaw,
a jig-saw, and a wood trimmer for pattern-making, six cabinet-maker's
benches, and an ample supply of hand tools.

EXPERIMENTAL ENGINEERING LABORATORIES

Road Materials Laboratory.—The apparatus for tests of non-bituminous
road materials includes a two-cylinder Deval abrasion machine, a ball mill, a
moulding press for briquettes of rock dust, a Page impact cementation tester,
a Page impact toughness tester, a rock crusher and a Purdue brick rattler.
This outfit the University owes to the generous aid of the late Dr. Logan
Waller Page. In addition, the Department has acquired a 40,000-pound compression
tester, a diamond core drill, a diamond rock saw, a grinding lap, a
Westphal balance, specific gravity apparatus, and a complete set of sieves.
Useful researches in the road-building rocks and gravels of Virginia, as well
as the standard tests, are conducted each year by the class in Civil Engineering.

The apparatus for tests of bituminous road materials includes the New
York Testing Laboratory penetrometer, the Kirschbaum ductility machine, the
Engler viscosimeter, the asphalt viscosimeter, the New York Testing Laboratory
extractor, the New York State Board of Health oil tester, Hubbard pyknometers,
asphalt flow plates, gas and electric hot plates, and the accessory
apparatus needed for research on bituminous road-binders.

Structural Materials Laboratory.—The Sinclair Laboratory for work in
testing structural materials was founded on the original donation of Mrs. John
Sinclair, of New York City, as a memorial to her late husband. The collection
has since been considerably enlarged. It contains a Riehle 100,000-pound
machine, arranged for tensile, compressive, and transverse tests, with an attachment
for taking autographic diagrams; an Olsen 100,000-pound machine and
fitted with a suspended ball compression block; a 200,000-pound Olsen machine
suitable for compressive tests and also supplied with extension arms for making
transverse tests of beams; an Olsen torsion machine of 50,000 inch-pounds
capacity; an Olsen impact-testing machine of 100 foot-pounds capacity; a
Ewing machine for finding the modulus of elasticity; hand machines for testing
rods and wires under pull, and small specimens of timber and cast iron
under transverse loads. It is also equipped with accessory measuring instruments;
these include a Henning extensometer, an Olsen compressometer, and a
Ewing optical extensometer of great delicacy.

The laboratory is completely equipped for making tests of cement, cement
aggregates, and concrete. It contains a Fairbank's tensile tester of 1,000 pounds
capacity; a compressometer for concrete specimens; tools for shearing tests
of concrete; an Olsen steaming oven for accelerated tests; an Olsen drying
oven with automatic temperature regulation; moist air closets; sieves for mechanical
analysis; moulds for tension and compression tests; and the required
small apparatus.

Fuel and Oil Laboratory.—For the determination of the heating value of
coal, petroleum, etc., the laboratory has an Emerson bomb calorimeter. For
gas and liquid fuel calorimetry, a Junker calorimeter made by the American
Meter Co. is used. The equipment also includes a Braun gas muffle furnace,
a Brown high resistance pyrometer, balances, platinum crucibles, etc. For investigating
lubricants, the laboratory is equipped with such apparatus as flash
and chill point testers, hydrometers, viscosimeters, etc., used in the determination
of the physical properties of oil.

Hydraulics Laboratory.—The laboratory equipment for work in hydraulics
comprises a steel tank for weir experiments with interchangeable bronze
notches; a hook gauge for measurement of surface levels; a stand-pipe provided
with a set of standard bronze orifices for experiments on efflux; commercial
pipe and elbows arranged for determining friction losses; Gurley
current meter; and the necessary scales, tanks, manometers, etc. It also includes
a pump which is piped to circulate water from a cement cistern to a
tank in the attic of the building.

Additional equipment of this laboratory is a motor driven centrifugal pump
with a capacity of 350 gallons per minute at 100 feet head, equipped with a
Venturi meter and the necessary piping, valves and gauges to provide for
complete performance tests on the pump. This unit also supplies water at
constant pressure for the other hydraulic tests.

Power Laboratory.—The laboratory is equipped to illustrate the theory
involved in Mechanical Engineering; to give practical instruction in the handling
of machinery; and to teach the fundamental methods of experimental
work. It contains a Ball high-speed engine; a De Laval turbine with condensing
and non-condensing nozzles, which is direct-connected to a 20-kva.
alternating-current generator; an Otto gasoline engine with a special piston
for alcohol; a White and Middleton 12 HP. Engine (gasoline or illuminating
gas); two Liberty aeroplane motors; a Wheeler surface condenser to which
the exhaust from any of the steam units may be connected; a Sturtevant
engine and blower; an air compressor; an A. B. C. Pitot tube; a steam pump;
steam traps, etc. For boiler tests, the boilers of the University Heating and
Lighting Plant are used. A new Unaflow Engine of recent design is to be installed
in time for the work of session 1929-30.

The instrument room contains all necessary apparatus for carrying out
complete tests. Among this may be mentioned indicators, thermometers, gauges,
planimeters, with standards for their correction and calibration; two types
of Orsat apparatus; separating and throttling calorimeters, etc.

FIELD WORK IN CIVIL ENGINEERING

The outfit of field instruments contains compasses, transits, and levels of
various approved makes; a solar transit, furnished also with stadia wires and
gradienter for tachymetric work; a Gurley mining transit, one of the finest
products of the instrument maker's art; a complete Gurley transit, graduated
to 30 seconds, with solar attachment; hand-levels and clinometers for field
topography; plane tables; a sextant; together with an adequate supply of
leveling rods, telemeter rods, signal poles, chains, tapes, pins, and so on. For
hydraulic surveys a hook gauge and a current meter are provided. All students
are instructed in the theory and adjustments of the field instruments and
in their practical use in the field. They are also required to make up their
field-books in standard forms; to reduce their surveys and execute all the necessary
profiles, plans and maps; and to determine lengths, areas, and volumes
both from the maps and from the original notes. Polar planimeters are provided
for facilitating such estimates, and a pantograph for making reduced
copies of finished drawings. A set of Beggs' Deformeter apparatus is available
for use in the work of Bridge Design.

ELECTRICAL ENGINEERING LABORATORY

The Scott Laboratory of Electrical Engineering.—This laboratory was
initially equipped and endowed by Mrs. Frances Branch Scott, of Richmond,
Va., as a memorial to her late son, an alumnus of this University. During
the year 1910 the equipment was substantially increased through the generosity
of the Hon. Charles R. Crane, of Chicago, Ill., a friend of the University.

Substantial additions of machines, measuring instruments, control apparatus,
and auxiliaries are being made regularly in order to keep the equipment
in the best order for laboratory work.

In addition to a supply from the University Power Plant the laboratory
is furnished from the Virginia Public Service Company through a synchronous
motor driving an alternator and three-wire direct current generator, with two
exciters, all on a common shaft. A complete three-panel switchboard for the
control of this set is equipped with full sets of instruments and controls including
a voltage regulator for the alternating current generator. Universal
plug and receptacle-connections facilitate the setting up of all experimental
combinations.

For the machine testing there are available two direct-current motor generator
sets with automatic push-button start and stop control complete, several
direct current motors and generators, series, shunt and compound; high-voltage
direct current generator set; steam-turbine-driven three-phase alternator with
exciter and control switchboard; experimental test set for alternating current
single or polyphase generator operation or induction motor testing; a second
test set with modern switchboard control panel and driving motor with automatic
start, stop, and reverse equipment; single-phase induction motor; single-phase
repulsion-induction motor; two- and three-phase induction motors; three-phase
induction-motor set for concatenation tests; induction generator; double-current
generator; several pairs of constant potential transformers; constant-current
transformer; polyphase transformer; mercury are rectifier set; Prony
brakes for all motors; variable resistances; variable inductances and capacities;
current and potential transformers; recording instruments; meters for
measuring frequency, power factor, and indicators of synchronism and grounded
circuits. A complete three-element oscillograph set with all accessories is
available. Two telephone central-office ringer and signal sets, and a 100-watt
radio broadcast transmitter are installed.

In addition to full sets of electric meters with the appliances for testing
and calibrating them, galvanometers of the best modern types, standard cells
and resistances, standard condensers, and other pieces of apparatus for minor
tests, this laboratory contains numerous pieces of the very best construction.
Such are the Wolff potentiometer, the Seimens and Halske Thomson double
bridge, the Koepsel permeameter, the Station photometer with Lummer-Brodhum
screen, Macbeth illuminometer, the Carey-Foster bridge and others.

BUILDINGS

The buildings devoted wholly or in part to the work of the Department of
Engineering are the following:

The Mechanical Laboratory is the main seat of the instruction in technical

studies. It is 180 by 70 feet and contains on the main floor the Dean's office
and the offices of three other professors; and three lecture-rooms.

Above are an office, a small drafting room for advanced students, and blueprint
and photographic rooms. Below on the ground floor are an office and
classroom, the electrical laboratories, the testing laboratories, apparatus and
storerooms, and the students' lavatory. In order to more adequately care for
increased numbers this building has undergone a considerable rearrangement
during recent years. Wood and machine shop equipment has been entirely
removed from the building, as well as the facilities for Freshman and Sophomore
Drawing. This change made available much needed classroom space
and allowed the electrical laboratories to be expanded. Incident to the changes
new cement floors were constructed for the Road Materials Testing Laboratory,
the main testing Laboratory and the main hall. A new high-pressure
steam line from the Power House was also installed.

The Shops are now temporarily housed in the Garage erected for the
Motor Truck Training Detachment during the World War. This building gives
a floor space of some 5,000 square feet and has allowed the rearrangement of
wood and machine shop equipment for group drive by four electric motors.
Space is also available in this structure for use in connection with the course
in automobile construction and testing.

The Drawing Room is temporarily housed near Peabody Hall in one of
the Barracks taken from the Training Camp site and rebuilt and fitted for
drawing. The building accommodates about 180 men, each man having his
individual drawing desk.

The Power House is a single-story building 110 by 40 feet. It contains the
University boiler plant and the electric lighting plant. The Boiler plant consists
of two horizontal return-tubular boilers, each of 140 horsepower. The
lighting plant consists of three electric generators directly connected to high-speed
engines, the respective capacities being 25, 50, and 75 kilowatts. The
whole plant is available for purposes of instruction, study and experiment.

In addition to the University plants there are available by courtesy of the
owners for purposes of inspection, study and tests such plants as the turbine
station and railway and power substation of the Virginia Public Service Company,
the water turbines and oil engine plant of the Charlottesville Woolen
mills, and plants of the local ice companies and cold storage.

The Geological Museum is 120 by 50 feet. It is a three-story building.
The main floor is devoted to the very extensive geological collection of specimens,
charts, relief maps, and so on. The gallery above contains an equally
good collection of minerals and numerous models of typical crystallographic
forms. The upper floor contains the lecture-rooms and the laboratories of
Economic Geology. In the basement are stored subsidiary collections and new
material accumulated in more recent geological surveys.

The Physical Laboratory faces the Mechanical Laboratory on the opposite
side of the quadrangle, and has almost the same proportions. The main floor
contains the lecture-room, the professors' offices, the laboratory of experimental
physics, and the storeroom for the very large collection of apparatus
used in the lectures. On the ground floor is the laboratory of theoretical electricity,

the storage battery room, a well-equipped shop for the repair and
manufacture of apparatus, and smaller rooms for the work of graduate students.

The new Chemical Laboratory was opened for use in September, 1917.
In this fire-proof structure all the work in Chemistry is assembled. The floor
area provided is about 30,000 square feet. The lecture-rooms seat classes of
300, 75 and 25 students. The laboratories assigned to General Chemistry,
Organic Chemistry, Qualitative Analysis, Quantitative Analysis, and Physical
Chemistry contain 110, 60, 40, 30, and 20 desks. Altogether by dividing classes
into sections, 600 students may be accommodated. Smaller private laboratories
are provided for research workers. Large stock rooms communicating by elevators
with the several floors contain ample stores of chemical supplies. The
5,000 volumes of books and bound sets of journals constituting the Departmental
Library of Chemistry are so housed as to be accessible to both teachers
and students.

RECIPIENTS OF DEGREES, DEPARTMENT OF ENGINEERING,
JUNE 12, 1928

Civil Engineer

Hunt, Julius Franklin, B.S.E., University of Virginia

Wingdale, N. Y.

Mechanical Engineer

Joachim, Edward Fruth

Charlottesville, Va.

Bachelors of Science in Engineering

Davis, Charles Hall, Jr.	Petersburg, Va.
Forsyth, Harry Douglas	Esmont, Va.
Joachim, Edward Fruth	Charlottesville, Va.
Macdonald, Donald Grant	Leesburg, Va.
Phillips, John Henry	Wintergreen, Va.
Phillips, Walter Lee, Jr.	Richmond, Va.
Reed, Charles Boogher	Marion, Ky.
Risher, Daniel Harrison, B.S., University of Virginia	University, Va.
Rogers, William Minor Lile, B.A., Univ. of Virginia	Covington, Va.
Stevenson, Edward Carl	Richmond, Va.
Unger, Gilbert Carleton, Jr.	Richmond, Va.
[2] Williams, Harrison, Jr.	Leesburg, Va.

Summary of Degrees in Engineering, June, 1928

Bachelors of Science in Engineering	12
Civil Engineer	1
Mechanical Engineer	1
Total	14

[2]

Died, July 23, 1928.

DEAN'S LIST OF DISTINGUISHED STUDENTS, DEPARTMENT OF
ENGINEERING, ENTIRE SESSION 1927-1928

Andrews, Edwin Eads, Jr.	Charlottesville, Va.
Beverage, James Walker	Monterey, Va.
Forsyth, Harry Douglas	Esmont, Va.
Davis, Thomas	Norfolk, Va.
Harmon, Charles Dorsey	Waynesboro, Va.
Joachim, Edward Fruth	Charlottesville, Va.
Johnson, Alva Alexander	Mineral, Va.
Kanter, Carl	Norfolk, Va.
McMurdo, Charles Edward	Charlottesville, Va.
Macdonald, Donald Grant	Leesburg, Va.
Moore, Garnett Virgil	Buchanan, Va.
Petrescu, Ovid Stephen	Winchester, Va.
Phillips, Walter Lee, Jr.	Richmond, Va.
Quarles, Gilford Godfrey	Charlottesville, Va.
Quarles, Lawrence Reginald	Charlottesville, Va.
Rogers, William Minor Lile	Covington, Va.
Rose, Frank William, Jr.	Washington, D. C.
Stevenson, Edward Carl	Richmond, Va.
Thompson, Arthur Carl	Charlottesville, Va.
Unger, Gilbert Carleton, Jr.	Richmond, Va.
Walters, Marvin Rea	Charlottesville, Va.
Total, 21.

REGISTER OF STUDENTS, DEPARTMENT OF ENGINEERING

Special Students

Cabell, Frederick Ivanhoe	Norwood, Va.
Lloyd, John Janney, Jr.	Rochester, N. Y.
Long, Eugene Jackson	University, Va.
Peterson, Thomas James	Audubon, N. J.

College Student in Engineering Courses

Powelson, Roger VanNest

New York, N. Y.

Freshman Class

Arakelian, Vahe Martyr	Charilaos, Salonica, Greece.
Beaty, Curtis Charles	Orange, Tex.
Belote, George Dewey	Cape Charles, Va.
Chandlee, Courtland Ellis	Mount Vernon, N. Y.
Cowell, Ensign John Henry	Glen Ridge, N. J.
Daniel, James Nelson	Charlottesville, Va.
Dawson, John Lawrence	Summit, N. J.
Edwards, Tazewell Wayne, Jr.	Charlottesville, Va.
Elliott, Homer Philander, Jr.	Charleston, W. Va.
Goldberg, Milton	Portsmouth, Va.
Gordon, William Raymond	Denver, Colo.
Hester, Frederick William	Houston, Tex.
Hitchcock, John	Proffit, Va.
Janney, John Randolph, Jr.	Newark, N. J.
Jones, George Raymond	Washington, D. C.
Jones, Robert Brinkley, Jr.	Richmond, Va.
Kirkman, Robert	Port Jervis, N. Y.
Knipe, Jay Oliver	Winthrop, Mass.
Kraus, Philip Kurtz	New York, N. Y.
Ladd, Allen Quarles	Cobham, Va.
Lipscomb, William Fitzgerald	Virginia Beach, Va.
LoCascio, Theodore John	Norfolk, Va.
McIlhenny, Jack Stauffer	Charlottesville, Va.
Macdonald, Harry Parker	Montclair, N. J.
Merow, Edward John	Little Valley, N. Y.
Michie, Wilson Barrett	University, Va.
Miller, Brown	Washington, D. C.
Moore, Kirk Montague	Mount Pleasant, S. C.
Parker, Erle, Jr.	Newark, N. J.
Paterson, Roy Mackenzie	Newport News, Va.
Peter, Arthur, Jr.	Louisville, Ky.
Pollard, Joseph Littlebury, Jr.	Portsmouth, Va.
Price, Harry Borum, Jr.	Norfolk, Va.
Price, William Keyser, Jr.	New Market, Va.
Purks, Walter Donovan	Goby, Va.
Rinehart, Thomas Munford	Wilmington, Del.
Ross, William Tyler	Roanoke, Va.
Scofield, Donald Wilson	Roselle Park, N. J.
Sender, Leopold	Philadelphia, Pa.
Short, Lawrence A.	Charlottesville, Va.
Shuff, John Henry	Pulaski, Va.
Smith, John Collins	York, Pa.
Snyder, Edward Burns	Barberton, Ohio.
Spicer, Clyde	Ivy, Va.
Stine, Edwin LeRoy, Jr.	Winchester, Va.
Strange, Oscar Owen	Lynchburg, Va.
Sutherland, Marvin McTyiere	Pulaski, Va.
Vaughan, John Livingston, Jr.	Shawsville, Va.
Waite, John Herbert, Jr.	Waynesboro, Va.
Weldon, Harry Aloysious	New Rochelle, N. Y.
Wood, William Allen, III	Norfolk, Va.
Woodberry, William Rodes	Staunton, Va.

Sophomore Class

Abell, John Dean	Ivy Depot, Va.
Bauserman, Willard Andrew	Woodstock, Va.
Blann, John Edward	Washington, D. C.
Boulware, Hodge Casey	Silver City, N. M.
Campfield, William Bradford	Staunton, Va.
Creecy, David Rice, Jr.	Richmond, Va.
Dunham, Harry Stanley	Saltville, Va.
Edwards, John William	Charlottesville, Va.
Esposito, Alfonso Romulus Tullius	Norfolk, Va.
Everett, Edward Hale	Nelly's Ford, Va.
Gildea, Robert Edward Lee	Catonsville, Md.
Godley, Ashton Little	Wallingford, Pa.
Graham, Dorrance Alfred	Staunton, Va.
Graves, Alvin Cushman	Washington, D. C.
Gunnell, Bruce Covington	Washington, D. C.
Ham, William Taylor, Jr.	Norfolk, Va.
Haring, George Donald	Hackensack, N. J.
Hawkins, Clarence Mortimer	Potomac, Va.
Kelley, Dennis Stafford	Alexandria, Va.
Kinney, Theodore Simonson	Hasbrouck Heights, N.J.
Lafferty, William Lightfoot	Crozet, Va.
Lancaster, Robert Alexander	New Brighton, Staten Island, N. Y.
McCoy, Ellis Edwin, Jr.	Charlottesville, Va.
McMahon, Charles Herbert	Baltimore, Md.
Maulsby, David Lee	Charlottesville, Va.
Mayers, Drayton Alexander	Marion, S. C.
Melo, Salvador	Tampico, Mex.
Page, Thomas Walker, III	Washington, D. C.
Payne, Mortimer Elliot	Sharps, Va.
Pfeifer, Herman, Jr.	Staten Island, N. Y.
Quarles, Richard Wingfield	Richmond, Va.
Read, John Thompson Darby	Charleston, S. C.
Robertson, George Austin	Norfolk, Va.
Rueger, Charles Adolph	Richmond, Va.
Summers, Walter Armistead	Norfolk, Va.
Thornhill, William David	Charlottesville, Va.
Thurston, Harry Wyant	Richmond, Va.
Voorhies, Richard Crosby	Port au Prince, Haiti.
White, Grover Lee, Jr.	Norfolk, Va.
Wilkinson, William Solomon, Jr.	Norfolk, Va.
Williamson, Edwin Holt	Burlington, N. C.
Wilson, Charles Clarence	Salem, Va.

Junior Class

Andrews, Edwin Eads, Jr.	Charlottesville, Va.
Bacon, Francis Page, III	Pass Christian, Miss.
Barnes, William Blair	Lanexa, Va.
Beverage, James Walker	Monterey, Va.
Bodner, Jack	Norfolk, Va.
Brown, Collingwood Bruce, Jr.	Montreal, Canada.
Chapman, William Rankin	Charlottesville, Va.
Davis, Thomas	Norfolk, Va.
Davis, William Lee, Jr.	Portsmouth, Va.
Dickinson, Charles Hughes	Charlottesville, Va.
Dunlap, Alexander Harrow	Charlottesville, Va.
Gallagher, Philip A.	Portsmouth, Va.
Godsey, James Snead	Cumberland, Va.
Johnson, Alva Alexander	Mineral, Va.
Kanter, Carl	Norfolk, Va.
Kramer, Albert Jack	Winchester, Va.
Krebs, Paul Bernard	Birmingham, Ala.
Lawrence, Marcus Jay	Washington, D. C.
LeSueur, Ella Mae	Bristol, Va.
Mann, Hamilton Hirst	Staunton, Va.
Moore, Garnett Virgil	Buchanan, Va.
Nixon, John William	Purcellville, Va.
Pereda, Ramon Emilio	Juncos, P. R.
Quarles, Gilford Godfrey	Charlottesville, Va.
Rathbun, George Jay, Jr.	Easton, Pa.
Reed, Avery Henry, Jr.	Marion, Ky.
Rose, Frank William, Jr.	Washington, D. C.
Sayers, Samuel Rush	Wytheville, Va.
Walters, Marvin Rea	Charlottesville, Va.
Wilkinson, Claude Mallory	Richmond, Va.
Wright, Hunter Samuel	Elk Hill, Va.
Yeatts, Howard Swineford	Richmond, Va.

Senior Class

Brown, William Govan, Jr.	Concord, N. C.
Browning, Robert Turner	Flint Hill, Va.
Copps, Daniel Joseph Carroll	University, Va.
Fravel, William Harry	East Falls Church, Va.
Harmon, Charles Dorsey, B.A.	Waynesboro, Va.
Hinton, William Henry	Petersburg, Va.
Holt, Harry Reginald	Keswick, Va.
Hurt, William Whitmore	Marion, Va.
Kyle, Bernard Jerry	Brandy, Va.
Lee, Robert Edwin, Jr.	Charlottesville, Va.
McMurdo, Charles Edward	Charlottesville, Va.
Meetze, Hugh Yost	Manassas, Va.
Peach, Paul Selden	Upperville, Va.
Petrescu, Ovid Stephen	Winchester, Va.
Quarles, Lawrence Reginald	Charlottesville, Va.
Richards, Edward Wilcox	Warrenton, Va.
Seifried, Herbert George	Belleville, N. J.
Sergent, Dave A., Jr.	Big Stone Gap, Va.
Symington, William Wallace, Jr.	Baltimore, Md.
Thompson, Arthur Carl	Charlottesville, Va.
Wotton, John Alfred, Jr.	Roanoke, Va.

Post-Graduate Students

Joachim, Edward Fruth, B.S.E., M.E.	Charlottesville, Va.
Macdonald, Donald Grant, B.S.E.	Leesburg, Va.
Rogers, William Minor Lile, B.A., B.S.E.	Covington, Va.

SUMMARY BY CLASSES

Special Students	4
Freshman	52
Sophomores	42
Juniors	32
Seniors	21
Post-Graduates	3
Total	154

SUMMARY BY STATES

Alabama		1
Colorado		1
Delaware		1
District of Columbia		8
Kentucky		2
Maryland		3
Massachusetts		1
Mississippi		1
New Jersey		10
New Mexico		1
New York		8
North Carolina		2
Ohio		1
Pennsylvania		4
South Carolina		3
Texas		2
Virginia		99
West Virginia		1
Foreign:
Canada	1
Greece	1
Hayti	1
Mexico	1
Porto Rico	1	5
Total		154

University of Virginia Library

DEPARTMENT OF ENGINEERING

Instructors and Fellows

Assistants

ENTRANCE REQUIREMENTS

ADMISSION OF WOMEN

ADVANCED STANDING

PROGRAMS OF STUDY

COURSES OF INSTRUCTION

HUMANITIES

1-2-3: English:

4-5-6: English Composition:

10-11-12: Economics:

13-14-15: Commercial Law:

16-17-18: Government:

21-22-23: Cost Accounting:

26: Engineering Economics and Specifications:

31-32-33: History:

34-35-36: Elective:

40-41-42: Modern Language:

MATHEMATICS

100: Trigonometry:

106: Analytical Geometry and College Algebra:

107: Analytical Geometry and College Algebra:

108-109-110: Calculus:

111: Differential Equations:

158-159-160 Mathematics Laboratory:

PHYSICS

200-201-202: Sophomore Physics:

250-251-252: Physics Laboratory:

259: Electrical Laboratory:

CHEMISTRY

300-301-302: General Chemistry:

350-351-352: Chemistry Laboratory:

306-307-308: Analytical Chemistry:

356-357-358: Analytical Chemistry Laboratory:

309-310-311: Organic Chemistry:

359-360-361: Organic Chemistry Laboratory:

318-319-320: Quantitative Analysis:

368-369-370: Quantitative Analysis Laboratory:

321-322-323: Physical Chemistry:

371-372-373: Physical Chemistry Laboratory:

324-325-326: Principles of Chemical Engineering:

340-341-342: Applied Chemistry:

386-387-388: Chemical Engineering Research:

GEOLOGY

400-401-402: Engineering Geology:

450-451-452: Field and Laboratory:

403-404-405: Economic Geology:

453-454-455: Field and Laboratory:

409-410-411: Advanced Economic Geology:

459-460-461: Field and Laboratory:

412-413-414: Mineralogy:

462-463-464: Laboratory:

APPLIED MATHEMATICS

521: Plane Surveying:

522: Mechanical Drawing:

523: Descriptive Geometry:

524: Graphical Statics:

525: Structural Drawing:

526: Elementary Mechanics:

527: Applied Mechanics:

528: Strength of Materials:

529: Hydraulics:

541-542-543: Mining:

EXPERIMENTAL ENGINEERING

650: Road Materials Testing:

661: Structural Materials Testing:

662: Structural Materials Testing:

663: Structural Materials Testing:

670: Fuel and Oil Testing:

680: Hydraulic Testing:

690: Power Laboratory:

691: Power Laboratory:

692: Power Laboratory:

CIVIL ENGINEERING

701: Curves and Earthwork:

703: Highway Engineering:

705: Bridge Engineering:

707: Water Supply and Sewerage: