University of Virginia Library



No Page Number

DEPARTMENT OF ENGINEERING

Edwin Anderson Alderman, Ph.B., D.C.L., LL.D.

President of the University.

John Lloyd Newcomb, B.A., C.E.

Dean of the Department of Engineering.

                                                   

4

Page 4
                     
FRANCIS HENRY SMITH, M.A., D.C.L., LL.D.  Emeritus Professor of Natural Philosophy 
WILLIAM MYNN THORNTON, B.A., LL.D.  Professor of Applied Mathematics 
FRANCIS PERRY DUNNINGTON, C.E., E.M.  Professor of Analytical and Industrial Chemistry (retired
WILLIAM HOLDING ECHOLS, B.S., C.E.  Professor of Mathematics 
JAMES MORRIS PAGE, Ph.D., LL.D.  Professor of Mathematics 
ROBERT MONTGOMERY BIRD, B.S., Ph.D.  Professor of Chemistry 
WILLIAM HARRISON FAULKNER, M.A., Ph.D.  Professor of Germanic Languages 
JOHN LLOYD NEWCOMB, B.A., C.E.  Professor of Civil Engineering 
LLEWELLYN GRIFFITH HOXTON, M.A., Ph.D.  Professor of Physics 
WALTER SHELDON RODMAN, S.M.  Professor of Electrical Engineering 
CARROLL MASON SPARROW, B.A., Ph.D.  Professor of Physics 
JOHN JENNINGS LUCK, M.A., Ph.D.  Professor of Mathematics 
TIPTON RAY SNAVELY, M.A., Ph.D.  Professor of Economics 
WILBUR ARMISTEAD NELSON, B.S., M.A.  Corcoran Professor of Geology 
GARDNER LLOYD CARTER, M.A., Ph.D.  Professor of Chemistry 
ALBERT JULIUS BARLOW, B.A., C.P.A.  Professor of Business Administration 
BRUCE WILLIAMS, B.S., Ph.D.  Professor of Political Science 
DUMAS MALONE, M.A., Ph.D.  Professor of History 
W. PATTON GRAHAM, M.A.  Professor of Romanic Languages 
FRANCIS HARRIS ABBOT, M.A.  Professor of French 
HERMAN PATRICK JOHNSON, M.A., Ph.M.  Associate Professor of English Literature 
JOHN HOWE YOE, M.A., Ph.D.  Associate Professor of Chemistry 
[1] ROBERT NORTON PEASE, B.S., Ph.D.  Associate Professor of Chemistry 
EDWARD WATTS SAUNDERS, JR., C.E.  Associate Professor of Applied Mathematics 
WILLIAM EDWARD KNIGHT, M.E.  Associate Professor of Romanic Languages 
ARTHUR FRANCIS MACCONOCHIE, B. Sc.  Associate Professor of Mechanical Engineering 
FREDERICK LYONS BROWN, M.A., Ph.D.  Associate Professor of Physics 
JAMES SHANNON MILLER, JR., B.A., E.E.  Assistant Professor of Electrical Engineering 
ARMISTEAD CHURCHILL GORDON, JR., M.A., Ph.D.  Assistant Professor of English 
CHARLES HENDERSON, E.E.  Assistant Professor of Experimental Engineering 
FRANK STRINGFELLOW BARR, B.A., M.A.  Assistant Professor of History 
ARTHUR FERGUSON BENTON, M.A., Ph.D.  Assistant Professor of Chemistry 
JOSEPH RUSSELL BRANHAM, M.S., Ph.D.  Assistant Professor of Chemistry 
CHARLES NEWTON HULVEY, B.S., LL.B.  Assistant Professor of Commercial Law 
ARTHUR AUGUST PEGAU, M.A., Ph.D.  Assistant Professor of Geology 
HARRY STEPHENS LADD, M.S., Ph.D.  Assistant Professor of Geology 
JOSEPH CLIFTON ELGIN, Ch.E., M.S.  Acting Assistant Professor of Chemistry 

Instructors and Fellows

                         
James Marshall Cole, B.S. (Teaching Fellow)  Chemistry 
Raymond Dean Cool, B.S., M.S. (Teaching Fellow)  Chemistry 
Thomas Finley Debnam, B.S. in Commerce  Cost Accounting 
Harold Bertram Friedman, B.A. (Teaching Fellow)  Chemistry 
Carroll Wardlaw Griffin, B.S., M.S. (Teaching Fellow)  Chemistry 
Edward Franklin Hubbard, B.S. in Chem. (Teaching Fellow)  Chemistry 
Charles Rozier Larkin, B.A., M.A.  Mathematics 
Edwin Carlyle Markham, B.A. (Dupont Fellow)  Chemistry 
Franz Karl Mohr, M.A., Dr.Jus.  German 
Isaac Taylor Musser, Jr., B.S., M.S.  Economics 
John Victor Vaughen, B.A.  Chemistry 
Fontaine Allen Wells, B.S.  Mathematics 
Whiting Faulkner Young, B.S. (Teaching Fellow)  Chemistry 

Assistants

                 

5

Page 5
                             
William Govan Brown, Jr.  Field-work 
Thomas Sterling Claiborne  Chemistry 
Marcus Walthall Dinwiddie  Chemistry 
Alexander Harrow Dunlap  Mathematics, Freshman Applied Mathematics and Shop-work 
Oscar Garth Fitzhugh  Chemistry 
Charles Lucian Gleaves, B.S.  Mathematics 
James Montrose Graham, Jr.  Sophomore and Junior Applied Mathematics 
John Lyttleton Justice  Chemistry 
Robert Erwin Lee, Jr.  Field-work 
Richard Sale Leftwich, B.A.  Mathematics 
William Stapleton Long, B.A., M.A.  English Literature 
Donald Grant Macdonald  Shop-work 
Stephen Nicholas Moore, E.E.  Experimental Engineering, Physics and Senior Applied Mathematics 
Ovid Stephen Petrescu  Freshman Applied Mathematics, Steam Engineering and Shop-work 
John Henry Phillips  Plane Surveying 
Walter Lee Phillips, Jr.  Field-work 
Lawrence Reginald Quarles  Freshman Applied Mathematics 
William Minor Lile Rogers  Physics 
Edward Worthington Selden  Junior Applied Mathematics and Field-work 
Howard Halley Shockey  Chemistry 
Ewing Gordon Simpson, E.E.  Electrical Engineering and Mathematics 
Edward Carl Stevenson  Mathematics 
George Webster Struthers  Chemistry 
Thomas Aubrey White  Chemistry 

ENTRANCE REQUIREMENTS

For admission to the Freshman Class in the Department of Engineering the
candidate must be at least sixteen years old. He must present a certificate of
honorable withdrawal from the school last attended, or other valid proof of general
good character. He must further satisfy the Dean of the University as to
his adequate preparation for the work by passing the Entrance Examinations
specified below or by the presentation of equivalent certificates of preparation
signed by the president of a recognized institution of collegiate rank, or by the
principal of an accredited high school. The topics required for entrance and their
values in units are as follows, the unit being one year's work on the subject in
an accredited high school:

                     
English A.—Grammar and Grammatical Analysis 
English B.—Composition and Rhetoric 
English C.—Critical Study of Specimens of Literature 
Mathematics A1.—Algebra to Quadratics 
Mathematics A2.—Quadratics, Progressions, Binomial Formula 
Mathematics B.—Plane Geometry 
Mathematics C.—Solid Geometry  ½ 
Mathematics D.—Plane Trigonometry  ½ 
History.—Ancient; Mediæval; English; American (any one) 
Electives 
Total  15 

High school students who expect to study Engineering are advised to
include among their electives at least one Foreign Language (Latin or
French or German), one Science (Chemistry or Physics with adequate laboratory
work) and an additional unit of History. Other electives which may


6

Page 6
be profitably offered are History of English and American Literature, Greek,
Botany, Zoölogy, Physical Geography.

A candidate may be admitted as a Conditioned Student in spite of some
deficiencies in required entrance subjects, provided these are not such as
will impair the integrity of his work, but he must submit not less than 15
units. No such candidate will be conditioned except upon subjects actually
taught in this university, nor will any candidate be conditioned on more
than two units; and all conditions must be absolved before the beginning
of the next session after initial registration. Courses taken for the removal
of entrance conditions may in no case be counted as part of the work credited
for any degree. No conditions will be allowed in English A or B or
in Mathematics A1, A2, or B.

As the table of Entrance Requirements shows, the full High School
course in Mathematics is required for entrance to the Department of Engineering,
but unfortunately the graduates of the High Schools are often
deficient in Solid Geometry and Plane Trigonometry and can be admitted
only upon conditions in those subjects. High School principals are advised
to urge their graduates, with this status, to attend a Summer Session
at the University before entering the Department of Engineering so that
these deficiencies may be overcome. If the prospective student finds it
impossible to attend a Summer School previous to his regular matriculation,
a course has been planned which will allow him to make up his deficiencies
by taking work in the Summer School following his first year in Engineering.
This course provides for Trigonometry, Solid Geometry and College
Algebra in the three terms of the regular session, with the other work as
outlined for the regular student, and in addition, in the two terms of the
Summer School, Analytical and Coördinate Geometry are taken. Such a
program will prepare the student for entrance with Sophomore standing
and will save him from the failure usually encountered by students who attempt
to make up the deficient work in regular session in addition to the
full course of required subjects.

A candidate may be admitted as a Special Student, without formal examination,
provided he is more than twenty years old if a Virginian and not
less than twenty-three years old if a non-Virginian, and gives evidence
of serious purpose and of fitness to pursue with profit the courses for which
he is registered. No special student may be a candidate for any degree. No
conditioned student may register later as a special student.

ADMISSION OF WOMEN

Women are admitted as candidates for the Engineering Degrees but
not as Special Students. A candidate must be at least twenty years old on
the birthday preceding matriculation; must present certificates showing graduation
from an accredited public high-school, or not less than four years'
attendance in an accredited private school, with credit for not less than fifteen
college entrance units obtained at least two years before admission to
the University; and must in addition show by proper certificate the completion


7

Page 7
in a standard college, subsequent to the credit obtained for fifteen entrance-units,
of at least thirty session-hours, (sixty semester-hours) of
courses of college grade, in not less than eighteen calendar months.

ADVANCED STANDING

Under the elective system of the University of Virginia, a student who
has completed courses of college or university grade in other institutions of
learning on mathematical or scientific subjects may be excused from attendance
upon these courses by the Dean, with the advice and consent of the
professor in charge, and will then be registered for the more advanced work,
provided the full entrance requirements have been satisfied.

In order to secure College Credit upon such courses toward a degree in Engineering
from this University, the applicant must show—

1. That the courses offered are coextensive with the corresponding
courses as given in the University of Virginia.

2. That his grades on them were not below the seventy-five per cent.
pass-mark of this University.

Such credits may be granted by the faculty upon the recommendation
of the Dean and the professors in charge; but are automatically revoked by
the failure of the student to pass in the more advanced courses in the related
topics.

Advanced standing in the technical engineering subjects of higher grade
than those of the Sophomore year will not be given except to graduates of
other institutions offering technical engineering instruction and then only
upon special consideration of each application for such advanced standing.
No degree in Engineering will be awarded for less than one full year's work
in a regular session of this University and the work of a candidate's last
year must be performed in residence here.

The same rules apply to Credits on Summer School Courses; except that
for courses in the Summer School of this University the examination questions
must be prepared by the professor in charge of the regular course, and the answers
must be read and graded by him.

Students, suspended from other universities, are not granted college
credit on courses previously passed, except upon the explicit recommendation
of the suspending university, and after such additional tests as this Engineering
Faculty may impose.

Credits on Practice-Courses in Drawing, Shop-work, or Field-work may
be granted to applicants who have gained in professional practice the training
which these courses represent. Such applicants must file with the Dean
proper certificates from the official under whom the work was done and
must in every case pass an additional practical test on the subjects for which
credit is desired.

College credit is not granted for high-school work.


8

Page 8

PROGRAMS OF STUDY

The candidate who has satisfied the requirements for entrance as above
defined is matriculated as a student of Engineering and admitted to the
Freshman Class. The studies of this class comprise lecture courses in English,
Mathematics, Applied Mathematics, and Chemistry with associated
laboratory courses in Chemistry, Drawing, Shop-work and Field-work.

For advancement to the Sophomore Class the student must have completed
at least two-thirds of his Freshman work. Upon entering this class
the student majoring in Chemical Engineering begins his specialized work,
while all others pursue identical courses of study through the year. On entering
the Junior year each student elects his specialty. The courses thereafter
diverge according to the major subject chosen by the student. Programs
of study for each degree are given below.

The courses are so ordered that the specified entrance requirements are adequate
for the work of the Freshman Year. Each succeeding year pre-supposes
the completion of the work for all the foregoing years. Students are advised to
adhere strictly to the regular programs.
The arrangements specified in them have
been carefully planned and are the best. Departures from the curriculum will in
almost every case produce conflicts in lecture hours or laboratory periods and
may cost the student a year's time. Haphazard election is discouraged and in
extreme cases will be prohibited. No student will be registered for a course unless,
in the opinion both of the Dean and of the professor, his preliminary training
has fitted him for the profitable pursuit of that course.

Students are especially advised against the attempt to crowd too many studies
into their scheme of work, and are warned that admission to advanced courses
will be granted only to those who have adequate mathematical and scientific
training to profit by them. Men overloaded with work, too great in volume or
in difficulty for their powers, suffer inevitable discouragement and incur almost
certain failure.

Changes of classes with transfer of fees may be made, subject to the approval
of the Dean, within two weeks after the beginning of any term. Thereafter
such changes may be made only by special order of the faculty, and then
without transfer of fees.

Upon the completion of the four years' course as defined in any one of the
Programs of Study, the faculty will award to any student in regular and honorable
standing the degree of Bachelor of Science in Engineering. Upon the
completion of the additional Graduate Course in a satisfactory manner the faculty
will award the appropriate degree of Civil Engineer, Mechanical Engineer,
Electrical Engineer, Chemical Engineer, or Mining Engineer.

The new five-year curriculum has been adopted at the University of
Virginia in view of the impressive and growing demand from practicing
engineers and industrial leaders that Schools of Engineering should enlarge
the field of study to embrace more of the humanities and better opportunities
for student research, to the end that graduates may be better fitted to
undertake their duties as engineers and citizens.


9

Page 9

COURSES OF INSTRUCTION

The Subjects of Instruction in Engineering are grouped into classes,
each designated by a distinctive number for each term, the lecture and laboratory
courses being likewise differentiated. This grouping follows the
arrangement shown below:

                   
Humanities  1 to 99 
Mathematics  100 to 199 
Physics  200 to 299 
Chemistry  300 to 399 
Geology  400 to 499 
Applied Mathematics  500 to 599 
Experimental Engineering  600 to 699 
Civil Engineering including Field-work  700 to 799 
Mechanical Engineering including Shop-work  800 to 899 
Electrical Engineering  900 to 999 

Lecture courses are listed in the first fifty numbers of all classes; laboratory
or practice courses are listed in the second fifty numbers of all classes.
The same numbers are used in schedules of lecture hours, laboratory periods
and examination days.

HUMANITIES

1-2-3. English Literature. [Johnson and Instructor.]

12:30-1:30, M. W. F.

First and second terms: Advanced composition with parallel reading,
with particular attention to Description, Exposition, and Argument. Third
term: Survey of English literature with composition and parallel reading,
with particular attention to scientific writings. (Fall, Winter, Spring.)

4-5-6. English Literature. [Gordon.]

8:30-9:30, M. W. F.

An advanced course in English to be taken by Juniors in all courses
and chosen on the approval of the Faculty of Engineering. (Fall, Winter,
Spring.)

10-11-12. Economics. [Snavely.]

9:30-10:30, M. W. F.

First and second terms: Survey of the principles of economics. Third
term: The bearing of these principles upon present American conditions.
Instruction will be given by lectures, assigned readings, reports, and discussions.
(Fall, Winter, Spring.)

Optional course, for all except Chemical Engineering students, in place
of which a three-session-hour course in Modern Language (40-41-42),
French, German or Spanish may be chosen.

13-14-15. Commercial Law. [Hulvey.]

8:30-9:30, T. Th. S.

A detailed study of the fundamentals and important, rather than the
technical, principles of those subjects of which knowledge is necessary in
ordinary commercial transactions. (Fall, Winter, Spring.) Optional for
Government (16-17-18) or History (31-32-33).


10

Page 10

16-17-18. Government. [Williams.]

9:30-10:30, T. Th. S.

A description and comparison of the principles and essential features of
the governments of the United States, England, France, Germany, and
Switzerland, with especial emphasis on the characteristics of the American
Constitutional system and the operation of Congressional government.
(Fall, Winter, Spring.) Optional for Commercial Law (13-14-15) or History
(31-32-33).

21-22-23. Cost Accounting. [Barlow.]

9:30-10:30, M. W. F.

Fall term: Theory and practice in General Accounting. Winter and
Spring terms: Application of accounting principles to various types of manufacturing
and engineering enterprises. (Fall, Winter, Spring.)

26. Engineering Economics and Specifications. [Rodman.]

11:30-12:30, T. Th. S.

Lectures, parallel reading and written work dealing with the economic
considerations involved in engineering problems and specifications for engineering
structures. Special emphasis is placed upon the general problem
of economic selection of methods, machinery and apparatus in the several
engineering fields. Questions of first cost, depreciation, rates for service,
etc., will be treated. Complete specifications are required from each student,
subjects being chosen particularly from the special field of study of
each individual student. (Winter.)

31-32-33. History. [Malone or Barr.]

11:30-12:30, T. Th. S. or 12:30-1:30, M. W. F.

A college course in history to be chosen by the student and approved
by the Faculty of Engineering. (Fall, Winter, Spring.) Optional for Commercial
Law (13-14-15) or Government (16-17-18).

34-35-36. Elective.

A graduate-year humanistic course chosen from Philosophy, Architecture,
Fine Art, or other subject approved by the Faculty of Engineering.
(Fall, Winter, Spring.)

40-41-42. Modern Language. [Faulkner, Graham, Abbot, Knight.]

9:30-10:30, M. T. W. Th. F.

A college credit course in modern language chosen between French,
German and Spanish and upon approval of the student's major-subject professor.
(Fall, Winter, Spring.) An optional course, for all except Chemical
Engineering students, which may be taken in place of Economics (10-11-12).
Chemical Engineering students are required to take German for
one year.

MATHEMATICS

100. Trigonometry. [Luck and Instructors.]

9:30-10:30, T. Th. S.

A complete course in plane trigonometry is pursued with constant drill
in the solution of problems, and exercises in the use of logarithms. (Fall.)


11

Page 11

106. Analytical Geometry and College Algebra. [Luck and Instructors.]

9:30-10:30, T. Th. S.

In this course Cartesian and polar coördinates are presented and applied
to the study of the straight line and the circle. The related college algebra
topics of determinants, the function notion with especial reference to the
linear function, the graphical representation of equations and of functions
are also considered. (Winter.)

107. Analytical Geometry and College Algebra. [Luck and Instructors.]

9:30-10:30, T. Th. S.

This course is a continuation of course 106. The conic is studied in its
particular and general forms. Especial attention is given to the solution of
numerous loci problems by the use of Cartesian and polar coördinates. The
study of related college algebra topics is continued. The quadratic function
of one and two variables, the theory of the quadratic equation in particular
and of equations in general are some of the topics considered. (Spring.)

108-109-110. Calculus. [Echols and Saunders.]

11-30-12:30, M. W. F.

A first course in the differential and integral calculus. This includes a
study of series and partial fractions. The principal emphasis is upon the applications
of the subject to geometry, elementary kinematics and mechanical
problems. (Fall, Winter, Spring.)

111. Differential Equations. [Saunders.]

12:30-1:30, T. Th. S.

An elementary course in differential equations with particular reference
to the differential equations of electrical engineering. (Fall.)

158-159-160. Mathematics Laboratory. [Instructors.]

6 hours a week.

An intensive, supervised study of Calculus problems with extensive drill
in the solution and formation of the calculus forms with particular reference
to its use as a tool in the solution of physical and engineering problems.
(Fall, Winter, Spring.)

PHYSICS

200-201-202. Sophomore Physics. [Brown.]

9:30-10:30, M. W. F.

250-251-252. Physics Laboratory. [Brown and Assistants.]

10:30-12:30, T. Th. S.

An elementary course in general physics consisting of lectures, lecture
demonstrations, recitations and laboratory exercises. (Fall, Winter, Spring.)

259. Electrical Laboratory. [Hoxton and Brown.]

2:30-5:30, Th.

This course deals particularly with the more precise electrical measurements
and the manipulation of instruments of precision used in the higher
grade of electrical testing and standardization. (Winter.)


12

Page 12

CHEMISTRY

300-301-302. General Chemistry. [Carter, Branham and Assistants.]

10:30-11:30, T. Th. S.

350-351-352. Chemistry Laboratory.

11:30-1:30, T. Th. S.

The fundamental principles and phenomena of inorganic, organic, and
physical chemistry, and the foundations of analytical chemistry. Most of
the time is devoted to inorganic phenomena. (Fall, Winter, Spring.)

303-304-305. Physical Chemistry. [Elgin.]

12:30-1:30, M. W. F.

353-354-355. Physical Chemistry Laboratory.

2:30-5:30, T. Th.

Chemistry 315-16-17 prerequisite, as well as some knowledge of the Calculus and
previous training in Physics.

This course is divided into three parts. The first term will be devoted
to a study of certain fundamental properties of gases, liquids, and solids. The
second term is taken up with a quantitative study of chemical reactions from
the standpoint of velocity and equilibrium. In the third term solutions of
electrolytes will be studied and the final weeks will be devoted to recent work
on the structure of matter. (Fall, Winter, Spring.)

309-310-311. Organic Chemistry. [Bird and Assistants.]

11:30-12:30, T. Th. S.

359-360-361. Organic Chemistry Laboratory.

2:30-5:30, T. Th.

Chemistry 300-1-2 prerequisite.

An introduction to the study of the compounds of carbon, including the
application of modern chemical theory to such compounds and their reactions.
(Fall, Winter, Spring.)

312-313-314. Advanced Organic Chemistry. [Bird.]

2:30-3:30, M. W. F.

362-363-364. Advanced Organic Chemistry Laboratory.

9 hours per week.

Chemistry 309-10-11 and 303-4-5 prerequisite.

The lectures deal with selected topics in organic chemistry. Reading
from the scientific journals, advanced texts, and the history of Chemistry
will be assigned. The laboratory work involves a study of typical problems,
designed to teach methods of investigation which are widely applicable. (Fall,
Winter, Spring.)

315-316-317. Qualitative Analysis. [Yoe and Assistants.]

8:30-9:30, T. Th. S.

365-366-367. Qualitative Analysis Laboratory.

2:30-5:30, T. Th.

Chemistry 300-1-2 prerequisite.

Fall and Winter terms, 3 hours of lecture and 6 hours of laboratory
work per week, devoted to the study of systematic qualitative analysis.
Spring term, 2 hours of lecture and 9 hours of laboratory work per week,
devoted to elementary quantitative analysis. In the lectures and recitation


13

Page 13
work special emphasis is given to the theoretical foundations of analytical
chemistry. (Fall, Winter, Spring.)

318-319-320. Quantitative Analysis. [Yoe and Assistants.]

Lecture by appointment.

368-369-370. Quantitative Analysis Laboratory.

2:30-5:30, M. W.

Chemistry 315-16-17 prerequisite.

A course in the principles of quantitative analysis. The laboratory work
will include a study of characteristic procedures, illustrating gravimetric and
volumetric analysis. 1 hour of lecture and 6 hours of laboratory work per
week. (Fall, Winter, Spring.)

324-325-326. Principles of Chemical Engineering.

A study of the fundamental principles underlying the unit processes employed
in chemical engineering, such as heat transfer, mixing, separation of
mixtures, absorption, distillation, crystallization, and others. (Fall, Winter,
Spring.)

340-341-342. Applied Chemistry. [Benton.]

9:30-10:30, T. Th. S.

Chemistry 309-10-11 and 303-4-5 prerequisite.

The lectures and recitations in this course will be devoted to the study of
fundamental principles underlying the more important phases of industrial
chemistry, including both theoretical and economic problems. A considerable
amount of reading in descriptive industrial chemistry will be assigned,
and written reports upon special subjects will be required. Lectures and
Recitations 3 hours a week. (Fall, Winter, Spring.)

386-387-388. Chemical Research.

This course will be designed to afford an introduction to research methods.
Attention will be given to sources of information, including the use of
reference works, patents, and technical journals. The problems selected for
study will be chosen, wherever possible, with reference to their bearing upon
chemical engineering. (Fall, Winter, Spring.)

Advanced Courses: A number of advanced courses in Chemistry, not
listed above, are given and complete details are shown in the catalogue of the
College. When time permits, students in Chemical Engineering, who are
properly prepared, may take such of these courses as are approved by the
Faculty of Engineering. Seminars will be offered in the different branches
of Chemistry to students applying for the degree of Doctor of Philosophy.
The courses will be offered only as occasion demands, and the subjects treated
will vary. These courses will be designated as "D" courses, but owing to
the flexibility which it is desired to secure in the subject matter, no definite
statement of them will be made except that special phases of Physical, Inorganic,
and Analytical Chemistry will be treated, including such subjects
as radio-chemistry, the chemistry of the rare elements, colloid and surface
chemistry, etc. Research work looking toward a thesis will accompany
these courses.


14

Page 14

The Chemical Journal Club will meet once a week (hour to be arranged)
for the critical review and discussion of various topics of interest in current
chemical literature and of such chemical researches as are in progress in the
University. All members of the teaching staff and advanced students in chemistry
are expected to participate in these meetings and to take part in the discussions.

Fellowships: The University announces the establishment of five Teaching
Fellowships in Chemistry, each with an honorarium of $500. These fellowships
present the opportunity for graduate study and research in Chemistry,
accompanied by a limited amount of instructional work. Holders of
the fellowships will be expected to devote not more than fifteen hours a
week to instruction, leaving ample time for research and work toward the
graduate degree. The fellowships are open to men who have received a bachelor's
degree from a college or university of recognized standing, and who
have received thorough undergraduate training in chemistry and physics.

GEOLOGY

400-401-402. Engineering Geology. [Nelson.]

11:30-12:30, M. T. W.

450-451-452. Field and Laboratory.

6 hours a week.

A course of three lectures a week and three hours for private study.
Special emphasis is given to the study of common rock-forming minerals
and rocks, building stones and ores. The divisions of dynamical,
structural and physiographical geology are covered in considerable detail,
and the practical applications of the topics treated to engineering work are
pointed out. (Fall, Winter, Spring.)

403-404-405. Economic Geology. [Ladd.]

10:30-11:30, M. W. F.

453-454-455. Field and Laboratory. [Nelson.]

6 hours a week.

This course is designed to give a general but comprehensive account of
the origin, nature, distribution and uses of the metallic and non-metallic
products of the earth with especial reference to those of the United States.
Lectures and collateral reading six hours a week. (Fall, Winter, Spring.)

406-407-408. Petrography. [Pegau.]

12:30-1:30, M. W. F.

456-457-458. Laboratory.

6 hours a week.

This course aims to give a full knowledge of the determination of the
common rock-forming minerals and rocks in thin sections under the microscope.
It includes discussion of the microscopic structure, mineralogical
composition, genetic relations, and distribution of igneous, sedimentary, and
metamorphic rocks. Lectures and preparation to the amount of six hours
per week. (Fall, Winter, Spring.) Optional with Mineralogy (412-413-414).

409-410-411. Advanced Economic Geology. [Nelson.]


15

Page 15

459-460-461. Field and Laboratory.

Hours by appointment.

Special topics in mining geology for advanced students, selected according
to the needs of the individual student. Lectures, laboratory and field
work, reading, reports and theses. (Fall, Winter, Spring.)

412-413-414. Mineralogy. [Pegau.]

10:30-11:30, M. W. F.

462-463-464. Laboratory.

6 hours a week.

Crystallography, physical and chemical mineralogy, and descriptive mineralogy.
(Fall, Winter, Spring.) Optional with Petrography (406-407-408.)

APPLIED MATHEMATICS

521. Plane Surveying. [Saunders and Assistants.]

10:30-11:30, M. W. F.

Lecture course: Theory, uses, and adjustments of compass, level,
transit, and stadia. Special methods of land, city, topographic and mining
surveys. Survey computation and maps. (Fall or Spring.)

571. Field course: Practical use of chain and tape, level, compass,
transit, and stadia. Field notes, records and reports. 6 hours a week.

522. Mechanical Drawing. [Thornton, Henderson and Assistants.]

10:30-11:30, M. W. F.

Lecture course: Plane problems, conic sections, graphic algebra. Projections
of prisms and pyramids; of cylinders, cones and spheres; of the
plane sections and intersections of solid bodies. (Fall or Winter.)

572. Practice course: Each week the student executes a finished plate
15″ × 20″ of exercises in mechanical drawing based on the lectures. 6 hours
a week.

523. Descriptive Geometry. [Thornton, Saunders and Assistants.]

10:30-11:30, M. W. F.

Lecture course: Fundamental problems on the point, line, and plane.
Projections, tangencies, and intersections of curved surfaces. Applications to
shades and shadows, problems in mining, and so on. (Winter or Spring.)

573. Practice course: Each student executes a weekly plate 15″ × 20″
of problems based on the lectures. 6 hours a week.

524. Graphical Statics. [Thornton and Assistants.]

10:30-11:30, T. Th. S.

Lecture course: Graphic composition and resolution of forces; centers
of gravity and moments of inertia; strain sheets for simple types of roof and
bridge trusses; beams under fixed and rolling loads; reservoir dams and retaining
walls; internal stresses and beam deflections. (Fall.)

574. Practice course: Each student executes a weekly plate 15″ × 20″
of problems based on the lectures. 6 hours a week.


16

Page 16

525. Structural Drawing. [Thornton and Assistants.]

10:30-11:30, T. Th. S.

Lecture course. Graphic analysis of steel and timber trusses for roofs
and bridges; of solid beams and plate girder bridges; and of reinforced concrete
slabs, girders, columns, and retaining walls. (Spring.)

575. Practice course: Design and detailed drawings of simple examples
of roofs and bridges, with complete computations for each structure.
6 hours a week.

526. Elementary Mechanics. [Thornton and Assistants.]

12:30-1:30, T. Th. S.

Lecture course. Composition and resolution of forces; friction; problems
in equilibrium; rectilinear motion, circular motion, projectile motion.
(Fall.)

576. Practice course: Solution of weekly problems in mechanics by
graphical and analytical methods. 6 hours a week.

527. Applied Mechanics [Thornton.]

12:30-1:30, M. W. F.

Review of elementary mechanics; dynamics of a particle; moments of
inertia; revolving bodies; rolling bodies; theory of work and energy; collision
of elastic solids; dynamics of the Steam Engine.

Weekly problems are assigned for solution by graphical and analytical
methods. (Spring.)

528. Strength of Materials. [Thornton.]

12:30-1:30, M. W. F.

Fundamental laws of stress and strain; straining actions and stresses in
ties and struts, beams and shafts, reinforced concrete slabs and girders; deflections
in simple, restrained and continuous girders; columns under axial
and eccentric loads. Laboratory courses 661-2-3. (Fall.)

529. Hydraulics. [Thornton.]

12:30-1:30, T. Th. S.

Equilibrium of fluids, applied to the analysis and design of thin and
thick shells and pipes, dams and weirs: Motion of fluids and discharges
from orifices, weir notches, pipes, canals, and rivers. Principles of linear
and angular momentum with applications to the analysis and design of hydraulic
motors and pumps. Laboratory course 680. (Spring.)

Laboratory studies in Strength of Materials and Hydraulics are given
in the Classes in Experimental Engineering.

541-542-543. Mining.

11:30-12:30, M. W. F.

Mine Surveying and Prospecting (Fall); Exploitation of Mines (Winter);
Mining Machinery (Spring). This course is for Seniors and requires
as a prerequisite the completion of the studies of the first three years.


17

Page 17

EXPERIMENTAL ENGINEERING

Lectures are given to explain the origin and manufacture of materials,
the design and operation of equipment, methods of conducting the tests, and
the calculation of the desired results from the data taken in the laboratory.
The work is done principally in the laboratories where special emphasis is
laid upon (1) a thorough understanding of the problem to be undertaken, (2)
accuracy in carrying out the investigation, (3) the presentation of the results
in a report which must meet the standards of professional practice.

650. Road Materials Testing. [Henderson and Assistant.]

6 hours a week.

Standard tests of Portland cement. Samples of stone are tested for
specific gravity, absorption, cementing value, toughness, resistance to abrasion,
and compressive strength. Asphalts and tars are tested for specific
gravity, penetration, melting point, volatilization, viscosity, flash point, fixed
carbon. (Fall.)

661. Structural Materials Testing. [Henderson and Assistant.]

5 hours a week.

Tests of cement, timber and metals. A course for Electrical and Mechanical
Engineers, similar to 662 and 663 but arranged so as to cover all of
the work in one term. (Winter.)

662. Structural Materials Testing. [Henderson and Assistant.]

5 hours a week.

Tests of sand; tests of fine and coarse aggregates; proportioning of
concrete; compression tests of concrete; tests of reinforced concrete beams;
construction of forms for concrete. For Civil Engineers. (Fall.)

663. Structural Materials Testing. [Henderson and Assistant.]

5 hours a week.

Continuation of Course 662. Tests of wires; tension, compression and
torsion tests of metals; tranverse tests of metals and timber; determination
of the Modulus of Elasticity of metals; autographic testing; impact tests of
metals. For Civil Engineers. (Winter.)

670. Fuel and Oil Testing. [Henderson and Assistant.]

5 hours a week.

Standard methods of sampling coal; proximate analysis of coal; determination
of the heating value of coal by the bomb calorimeter, with a study
of the cooling correction; the heating value of gas by the Junker calorimeter;
determination of heating value of liquid fuels; determination of specific gravity,
flash and boiling points, chill point, viscosity, carbon residue, and emulsification
value of oils. (Fall.)

680. Hydraulic Testing. [Henderson and Assistant.]

5 hours a week.

The measurement of the flow of water by means of orifices and weir
notches; determination of the coefficient of friction for pipe and pipe elbows;
study of a piston water meter; tests of large and small Venturi meters; performance
tests of piston and centrifugal pumps; measurement of stream velocity
and discharge by means of current meter. (Spring.)


18

Page 18

690. Power Laboratory. [Henderson.]

5 hours a week.

The calibration and adjustment of gauges; calibration of thermometers,
planimeters, pyrometers, and indicators; flue gas analysis; steam quality
tests; valve setting; determination of clearances; tests of steam boilers; tests
of a steam engine. For Mechanical Engineers. (Fall.)

691. Power Laboratory. [Henderson.]

5 hours a week.

Continuation of Course 690. Complete tests of a gasoline engine; complete
tests of a steam engine; tests of a steam turbine with a study of methods
of correcting to standard conditions. The Power Test Code of the
American Society of Mechanical Engineers used. For Mechanical Engineers.
(Winter.)

692. Power Laboratory. [Henderson.]

5 hours a week.

Continuation of Course 691. Tests of an air compressor; tests of a
blower; complete tests of a centrifugal pump, and other assigned tests. For
Mechanical Engineers. (Spring.)

CIVIL ENGINEERING

701. Curves and Earthwork. [Newcomb.]

10:30-11:30, M. W. F.

Lectures on simple circular, compound, reverse, transition and vertical
curves. The form of excavations and embankments, earthwork surveys,
computation of volumes, formation of embankments, computation of haul,
cost of earthwork, blasting. Practical problems covering work of lecture
course. (Fall.)

703. Highway Engineering. [Saunders.]

11:30-12:30, T. Th. S.

A study of highway economics, administration, legislation and organization.
The principles of highway location, surveying, mapping and design.
The construction, maintenance and characteristics of earth, sand-clay, gravel,
and broken stone roads. A study of bituminous materials. The construction,
maintenance and characteristics of bituminous macadam, bituminous
concrete, asphalt, cement-concrete, wood block, brick and stone block pavements.
Sidewalks, curbs and gutters. (Fall.)

705. Bridge Engineering. [Newcomb.]

10:30-11:30, M. W. F.

A study of bridge stresses, the design and construction of selected types
of steel bridges. (Winter.)

707. Water-supply and Sewerage. [Saunders.]

12:30-1:30, T. Th. S.

A study of the quality, sources, collection, conveyance, purification and
distribution of city water supplies; the drainage of houses and streets, the
collection and conveyance of sewage, the disposal of sewage, the construction
and maintenance of works. (Winter.)

715. Materials of Construction. [Henderson.]

12:30-1:30, T. Th. S.

A descriptive study of the properties, characteristics and manufacture


19

Page 19
of the materials used in engineering structures. Problems in estimating
quantities and costs. (Winter.)

716. Railway Engineering. [Newcomb.]

10:30-11:30, M. W. F.

An intensive study of the location, construction, maintenance and operation
of steam railways. Special attention is given to questions of railway
economics. (Spring.)

718. Masonry Structures. [Saunders.]

11:30-12:30, T. Th. S.

A study of the theory of reinforced concrete design. The design and
construction of selected types of masonry structures. Practical exercises in
design together with structural drawings. (Winter.)

719. Advanced Highway Engineering. [Newcomb and Instructor.]

9:30-10:30, T. Th. S.

Highway engineering design. Theory and economics of highway transport
surveys. Highway transport economics, methods, legislation and management.
Highway traffic regulations. (Spring.)

720. Structural Engineering. [Newcomb.]

9:30-10:30, T. Th. S.

An advanced course in the design and construction of engineering structures
of steel and masonry. The student will be required to design, detail
and prepare completed drawings of selected structures. (Fall.)

721. Design of Water-supply and Sewerage Systems. [Saunders.]

9:30-10:30, T. Th. S.

The design, construction and operation of water-supply and sewerage
systems. The student will be required to make complete designs and prepare
all necessary plans and specifications. (Fall.)

722. Sanitary Engineering. [Saunders.]

9:30-10:30, T. Th. S.

A study of water purification and sewage disposal. The design, construction
and operation of water purification works, and sewage disposal
plants. The student will be required to make complete designs and prepare
all necessary plans and specifications. (Spring.)

725. Civil Engineering Research.

This course will be devoted to intensive study and research planned to
accord with the student's individual choice of major topic of study in the
graduate year. (Spring.)

PRACTICE COURSES

751. Railroad Surveying. [Saunders and Assistants.]

9 hours a week.

This course supplements 701, Curves and Earthwork. The class is divided
into squads, each squad making complete surveys, maps, profiles, and
estimates for a mile of located line. (Fall.)


20

Page 20

755. Bridge Drafting. [Newcomb.]

12 hours a week.

This course accompanies 705, Bridges. Each student is required to
make complete design and detail drawings of one plate girder and one selected
type of bridge truss. (Winter.)

MECHANICAL ENGINEERING

800. Elementary Applied Thermodynamics. [Macconochie.]

12:30-1:30, T. Th. S.

Physical units and their measurement. Properties of the permanent
gases, of steam, ammonia, and carbon dioxide. The transformation of heat
energy into mechanical work. The production of cold. (Spring.)

801. Elementary Applied Thermodynamics. [Macconochie.]

12:30-1:30, M. W. F.

An introduction to the design and performance of boilers, steam engines,
steam turbines, internal combustion engines, and refrigerating plants.
(Winter.)

802. General Thermodynamics. [Macconochie.]

10:30-11:30, M. W. F.

The molecular theory of gases. Properties of fluids. The laws of thermodynamics.
Carnot's cycle. Entropy. Standard cycles. Fluids in motion.
(Fall.)

803. Applied Thermodynamics. [Macconochie.]

10:30-11:30, M. W. F.

The elementary theory of air compressors, internal combustion engines,
and mechanical refrigerators. (Spring.)

804. Applied Thermodynamics. [Macconochie.]

10:30-11:30, M. W. F.

The elementary theory of the steam engine and the steam turbine.
(Winter.)

805-806-807. Theory of Machines. [Macconochie.]

8:30-9:30, T. Th. S.

Relative displacements, velocities, and accelerations in mechanisms. Energy
equations. Wheel trains. Valve gears and linkages. Crank effort diagrams.
Inertia forces in machines. (Fall, Winter, Spring.)

810. Machine Design. [Macconochie.]

8:30-9:30, M. W. F.

The design of simple elements of machines such as screws, bolts, nuts,
keys, and cottered joints; riveted joints and connections; pipes and pipe
joints; shafts and shaft couplings; clutches; bearings and supports; thrust
blocks.

In addition to the lecture course, each student is expected to spend at
least six hours per week at the drawing board. (Fall.)


21

Page 21

811. Machine Design. [Macconochie.]

8:30-9:30, M. W. F.

The design of belt, rope, and chain transmission; friction drives; spur,
bevel, and screw gearing; cylinders, connecting rods and other engine details.

In addition to the lecture course, each student is expected to spend at
least six hours weekly at the drawing board. (Winter.)

812. Machine Design. [Macconochie.]

8:30-9:30, M. W. F.

The preparation of general assembly and detail drawings of a simple
steam engine, gas engine, or machine tool, including the computation of
stresses and checking of sizes.

In addition to the regular meetings of the class, each student is expected
to spend at least six hours weekly at the drawing board. (Spring.)

818. Industrial Management. [Macconochie.]

11:30-12:30, T. Th. S.

A study of the methods which are employed to promote harmony and
coöperation in industry. (Fall.)

820-821-822. Advanced Applied Thermodynamics. [Macconochie.]

10:30-11:30, T. Th. S.

The thermodynamic theory and design of the steam engine, steam turbine
and internal combustion engine. (Fall, Winter, Spring.)

SHOP-WORK

865. Pattern Shop. [Macconochie and Assistants.]

3 hours a week.

Exercises in the use of hand and machine tools, including the saw, planer,
and center lathe. The production of simple patterns. (Fall or Spring.)

866. Machine Shop. [Macconochie and Assistants.]

3 hours a week.

Exercises in turning, boring and screw cutting, machine tool operation, chipping,
filing and fitting at the bench. (Fall or Spring.)

Works Experience. Students of mechanical engineering are strongly
recommended to spend their summer vacations in the practice of their profession.
Wherever possible, arrangements will be made to facilitate this.

ELECTRICAL ENGINEERING

900. Elements of Electrical Engineering. [Rodman.]

11:30-12:30, M. W. F.

Lectures treating fundamental principles of Electrical Engineering;
basic ideas and fundamental units discussed; magnetic circuits and continuous
electric currents treated in detail; electromagnetism carefully studied.
Special attention is given to the physical conceptions involved, and numerous
assigned problems exemplify and broaden the theoretical discussions.
3 hours per week of supervised problem work. (Fall.)


22

Page 22

901. Direct Current Machines. [Rodman.]

11:30-12:30, M. W. F.

Lectures on the theory, construction, characteristics, and operation of
direct current generators and motors and the necessary apparatus required
for the proper management and control of these machines. The principles
of testing such machines are carefully discussed. Problems illustrating the
methods of calculation involved in continuous current circuits and practical
examples from standard engineering practice form an important part of the
work. 3 hours per week of supervised problem work. (Winter.)

902. Periodic Currents. [Rodman.]

11-30-12:30, M. W. F.

Lectures on electrostatic phenomena, variable currents, alternating currents,
and alternating current circuits, both single and polyphase. A careful
study is made of circuits with periodic currents and their characteristics when
resistance, inductive reactance and capacity reactance are present in their various
combinations. Extensive problem work is required to facilitate the
treatment of simple and complex circuits. 3 hours of supervised problem
work per week. (Spring.)

903. Alternating Current Machinery. [Rodman.]

10:30-11:30, M. W. F.

Lectures on balanced and unbalanced polyphase circuits and power
measurements followed by the treatment of theory, construction, characteristics,
and operation of synchronous alternating current generators. The
principles of testing such apparatus under various conditions of loading
are discussed, and assigned problem work illustrates the theory and practice.
3 hours per week of supervised problem work. (Fall.)

904. Alternating Current Machinery. [Rodman.]

10:30-11:30, M. W. F.

This course is a continuation of 903. The lectures treat more particularly
transformers, synchronous motors and parallel operation of alternating
current generators. Methods of testing are outlined and graphical
methods of calculation and predetermination of operating characteristics
are discussed. Problems taken from engineering practice serve to broaden
and fix the theoretical deducations. 3 hours per week of supervised problem
work. (Winter.)

905. Alternating Current Machinery. [Rodman.]

10:30-11:30, M. W. F.

This course is a continuation of 903-4. Lectures deal with the theory,
construction and operation of rotary converters, induction, series, and repulsion
motors. Problems are solved to clarify the theory. 3 hours of
supervised problem work per week. (Spring.)

906. Illumination and Photometry. [Rodman.]

11:30-12:30, T. Th. S.

Lectures on light, its physical properties; illuminants and their characteristics;
shades and reflectors; photometry, standards and apparatus; illumination
calculations for point and surface sources; principles of interior, exterior,
decorative, and scenic illumination. Problems illustrating computations
necessary for the consideration of the Illuminating Engineer are assigned.


23

Page 23
(Fall.) Optional for Hydro-electric Engineering (920), or Electric Traction
(907).

907. Electric Traction. [Rodman.]

11:30-12:30, T. Th. S.

Lectures on the various types of electric motors for traction purposes,
controllers and systems of control, brakes, rolling stock, track, train performance,
and electric railway economics. A discussion with problems of
the complete electrification system for electric railways, including generating
apparatus, transmission, sub-stations and equipment, distribution, and
utilization of electrical energy for car propulsion. (Fall.) Optional for
Hydro-electric Engineering (920), or Illumination and Photometry (906-956).

910. Direct Current Systems. [Rodman.]

10:30-11:30, T. Th. S.

Lectures dealing with the fundamentals of electrical circuits and direct
current machinery. Problem work accompanies the lectures. The course
is essentially for the non-electrical engineering students. (Fall.)

911. Alternating Current Systems. [Rodman.]

10:30-11:30, T. Th. S.

Lectures covering the fundamentals of alternating current circuits and
machinery. Brief expositions of the subjects of electric lighting and power
fundamentals. For non-electrical engineering students. (Winter.)

920. Hydro-electric Engineering. [Rodman.]

11:30-12:30, T. Th. S.

A course of lectures dealing with the fundamentals of hydro-electric engineering
from the consideration of rain-fall through the various steps of
investigation and construction to the finished plants, with especial emphasis
on the economic features of the problem. (Fall.) Optional for Illumination
and Photometry (906-956), or Electric Traction (907).

925. Electric Transients. [Miller.]

10:30-11:30, M. W. F.

A course dealing with transients as they are encountered in varied
electric circuits with regard to their production, behavior, and reduction
to minimum effects. (Spring.)

930-931-932. Electric Power Transmission. [Miller.]

9:30-10-30, T. Th. S.

A study of the problems involved in modern electric power transmission.
Treating the inductance and capacity of lines, aerial and underground;
corona; steady state solutions for short and long lines; production, effect,
and calculation of transient conditions with means of protecting against
such phenomena. (Fall, Winter, Spring.)

940-941-942. Electrical Communication. [Rodman and Miller.]

9:30-10:30, M. W. F.

A course dealing with the general subject of electrical communication
of intelligence by wire and wireless telegraph and telephone with emphasis
on the theoretical details of the subject. Treatment of the various mechanisms
and circuits utilized with particular reference to the vacuum tube engineering.
(Fall, Winter, Spring.)


24

Page 24

LABORATORY COURSES

950-951. Direct Current Laboratory. [Miller.]

5 hours a week.

This course supplements 900-1. The laboratory work is devoted to a
study of electrical instruments, their use and manipulation; simple electrical
circuits and study of direct current apparatus and its operation; characteristics
of generators and motors. (Winter, Spring.)

953-954-955. Alternating Current Laboratory. [Miller.]

5 hours a week.

This course supplements 902-3-4-5, dealing with measuring instruments
for alternating current circuits; series and parallel circuits and their characteristics;
polyphase circuits, balanced and unbalanced; and alternating current
generator, motor and transformer characteristics. (Fall, Winter, Spring.)

956. Photometric Laboratory. [Miller.]

2 hours a week.

This course accompanies 906. Photometric tests are made upon different
types of incandescent lamps. The operating characteristics of incandescent
and arc lamps are studied. Tests of illumination, interior and exterior,
are carried out. Study of photometric standards and devices. (Fall.)

960-961. Electrical Laboratory. [Miller.]

5 hours a week.

This course supplements 910-11. The work of the first term is devoted
to direct current tests; the second term exercises are on alternating current
circuits and machines. (Fall, Winter.)

975. Transient Laboratory. [Miller.]

4 hours a week.

A course supplementing 925. It deals largely with oscillographic
study of illustrative transient circuit phenomena of varied types. (Spring.)

980-981. Electric Power Transmission Laboratory. [Miller.]

4 hours a week.

A course supplementing 930-1-2 and dealing with certain phenomena
encountered in transmission circuits as they may be subjected to test on
artificial lines. (Fall, Winter.)

990-991-992. Electrical Communication Laboratory. [Rodman and Miller.]

4 hours a week.

A course supplementing 940-1-2 and devoted to various special tests of
communication circuits and apparatus. (Fall, Winter, Spring.)

STUDENT BRANCHES OF NATIONAL PROFESSIONAL
SOCIETIES

There have been established at the University of Virginia Student
Branches of the American Institute of Electrical Engineers (1912), the
American Society of Civil Engineers (1921) and the American Society of
Mechanical Engineers (1922). These societies hold regular meetings for the
discussion of periodical literature and the exposition by resident and visiting


25

Page 25
engineers of the present-day problems in Engineering. A valuable feature of
the meetings is the opportunity presented for practice in public speaking and
debate. At stated meetings the Branches hold joint sessions for the discussion
of mutually interesting questions.

TAU BETA PI

In May, 1921, a chapter of the National Honorary Engineering Fraternity
Tau Beta Pi was granted and the Alpha of Virginia Chapter of Tau
Beta Pi will henceforth serve to further inspire high scholarship and integrity.
This fraternity is recognized as the leading honorary engineering fraternity
of this country and its chapters are found in a limited number of engineering
schools of the highest standing. The members are elected with
care and the standards maintained are rigid both in respect to scholarship
and character.

THETA TAU

In June, 1923, a chapter of the National Engineering Fraternity of
Theta Tau was granted at the University of Virginia. This fraternity has
chapters in a score or more of the leading engineering schools of the country
and membership is eagerly sought and greatly appreciated by the members
of the student body. Elections are made each year based on scholarship
and general record of ability and promise of future service to the profession
of engineering.

ENGINEERING JOURNAL

During the session of 1920-1921 the University of Virginia Journal of
Engineering was first issued. The Journal is published by the Students of
Applied Science and is issued nine times yearly. Contributions are made by
students, instructors and alumni and the Journal gives to the students especially
an opportunity to take part in an activity of interest and value while
providing a medium in which may be published results of individual experience
and research.

ENGINEERING STUDENTS' READING CLUB

A gift to the Department of Engineering from Messrs. Arthur P. Jones,
William Barham Jones (B.A. 1907) and Major Kenneth S. Jones (B.A.,
LL.B., C.E. 1915, Major U. S. A., Engineer Corps) in memory of their
father, the late Walter H. Jones of Norfolk, Va., and of his deep interest in
the University of Virginia, in the form of an endowment fund has made it
possible to provide a considerable number of professional periodicals representing
the various engineering activities. To promote the regular use of
these periodicals an Engineering Students' Reading Club has been formed
to which all engineering students are eligible and this club is expected to
foster proper use of the periodicals to the end that the maximum of value
will be obtained by the students from their reading.


26

Page 26

FACILITIES FOR ILLUSTRATED LECTURES

To facilitate the presentation of illustrative material a complete Holmes
portable motion-picture projector has been installed, and the main lecture
room is now equipped with shades for darkening in order that good projection
may be obtained during daylight hours. A new Bausch and Lomb slide
and opaque projector is also available for this work in addition to the older
projector previously used.

HAMILTON BARKSDALE MEMORIAL LIBRARY

A gift to the Department of Engineering from Mrs. Hamilton Barksdale
in memory of her husband, an alumnus of the Engineering Department,
specifically donated for the purpose of building up the department
library, will make possible at once much needed changes and additions to
the library. The annual income from this fund, which became available
for the first time in the session of 1925-1926, will be devoted largely to
completing sets of the most valuable periodical literature in the various
fields of engineering together with the binding and suitable housing of these
and other printed publications of merit.


27

Page 27

UNIVERSITY OF VIRGINIA DEPARTMENT OF ENGINEERING
NEW ENGINEERING CURRICULUM

                                                                                                 
Freshman
All courses 
Sophomore
All except Chemical 
Sophomore
Chemical 
English 1-2-3  [2] Calculus 108-9-10  [2] Calculus 108-9-10 
Math. 100-106-107  [2] Physics 200-1-2  [2] Physics 200-1-2 
[2] Chem. 300-1-2  Engrg. 526-715-800  Engrg. 526-715-800 
[2] p. Math. 521-2-3  Com. Law 13-14-15 or  [2] Qual. Anal. 315-16-17 
[2] Field-work 571  Govt. 16-17-18 or 
[2] Shop-work 865-6  History 31-32-33 
L. F. $55  L. F. $15  L. F. $40 
Junior  Senior  Graduate 
Civil  English 4-5-6  Cost Acct. 21-2-3  [2] Eng. Geol. 400-1-2 
[2] Ap. Math. 524-9-5  Ap. Math. 527-8  [2] Elec. Sys. 910-11 
C. E. 703-7-18  [2] Exp. Engrg. 662-3-80  Engrg. Econs. & Spec. 26 
[2] Exp. Engrg. 650  C. E. 701-5-16  Elective 34-5-6 
Econs. 10-11-12 or  [2] Ry. Field-work 751  Option: C. E. 720-19 or 
Mod. Lang. 40-1-2  [2] Bridge Drafting 755  C. E. 721-22 
M. E. 801  C. E. Research 725 
L. F. $15  L. F. $35  L. F. $10 
Mechanical  English 4-5-6  Cost Acct. 21-2-3  M. E. 805-6-7 
[2] Ap. Math. 524-9-5  Ap. Math. 527-8  M. E. 820-21-22 
M. E. 802-4-3  [2] Exp. Engrg. 670-61-80  M. E. 818 
[2] Exp. Engrg. 690-1-2  M. E. 810-11-12  C. E. 719 
Econs. 10-11-12 or  [2] Elec. Sys. 910-11  Engrg. Econs. & Spec. 26 
Mod. Lang. 40-1-2  Elective 34-5-6 
M. E. 801 
L. F. $25  L. F. $25  L. F. $0 
Electrical  English 4-5-6  Cost Acct. 21-2-3  E. E. [2] 930-[2] 1-2 
[2] Ap. Math. 524-9-5  Ap. Math. 527-8  Option: E. E.[2] 906 
E. E. 900-1-2  [2] Exp. Engrg. 670-61-80  or 920 or 907 
Math. 111  E. E. 903-4-5  [2] Phys. 259 
[2] E. E. Lab. 950-1  [2] E. E. Lab. 953-4-5  Engrg. Econs. & Spec. 26 
Econs. 10-11-12 or  M. E. 801  [2] E. E. 925 
Mod. Lang. 40-1-2  Option: M. E. 802-4-3
with Exp. Engrg.
690-1-2 
or [2] E. E. 940-1-2 
Elective 34-5-6 
L. F. $20  L. F. $30  L. F. $30 
Chemical  English 4-5-6  Cost Acct. 21-2-3  Chem. Engrg. 324-5-6 
[2] Ap. Math. 524-5  [2] Quan. Anal. 318-19-20  Ap. Chem. 340-1-2 
[2] Org. Chem. 309-10-11  [2] Phys. Chem. 303-4-5  Engrg. Econs. & Spec. 26 
German 40-1-2  [2] Elec. Sys. 910-11  Elective 34-5-6 
M. E. 801  Ap. Math. 529.  [2] Chem. Research 386-7-8 
[2] Exp. Engrg. 680 
L. F. $35  L. F. $65  L. F. $25 
Mining  English 4-5-6  Cost Acct. 21-2-3  [2] Mineralogy 412-13-14 or 
[2] Ap. Math. 524-5  [2] Elec. Sys. 910-11  [2] Petrography 406-7-8 
[2] Engrg. Geol. 400-1-2  Ap. Math. 529  [2] Adv. Econ. Geol. 409-10-11 
Econs. 10-11-12 or  [2] Exp. Engrg. 680  Engrg. Econs. & Spec. 26 
Mod. Lang. 40-1-2  [2] Econ. Geol. 403-4-5  Elective 34-5-6 
M. E. 801  Mining 541-2-3  [2] Qual. Anal. 315-16-17 
L. F. $10  L. F. $15  L. F. $25 


No Page Number

SCHEDULE OF FOUR-YEAR COURSES

                                                                                           
CLASSES.  LECTURES.  LABORATORY. 
C—lectures per wk. S-H—session
hours. 
S-H  M. W. F.  T. Th. S. 
L—hrs. of practice per wk. 
Freshman  English (1-2-3)  12:30-1:30 
Math. (100-106-107)  9:30-10:30 
Gen. Chem. (300-301-302)  10:30-11:30  11:30-1:30, T. Th. S. 
Ap. Math. (521-522-523)  10:30-11:30  8:30-10:30, M. W. F. 
Field-work (571)  6 h. a. w. 
Shop-work (865-866)  3 h. a. w. 
Sophomore  Com. Law (13-14-15) or Govt. (16-17-18)  8:30 or 9:30 
or History (31-32-33)  11:30-12:30  or 12:30-1:30 
Math. (108-109-110)  11:30-12:30  2:30-4:30, M. W. F. 
Physics (200-201-202)  9:30-10:30  10:30-12:30, T. Th. S. 
Qual. Anal. (315-316-317)  8:30-9:30  2:30-5:30, T. Th. 
Engrg. (526-715-800)  12:30-1:30 
Junior  Eng. (4-5-6)  8:30-9:30 
Econs. (10-11-12) or  9:30-10:30 
Mod. Lang. (40-41-42) M. T. W. Th. F.  9:30-10:30 
Math. (111) Fall  12:30-1:30 
Org. Chem. (309-310-311)  11:30-12:30  2:30-5:30, T. Th. 
Engrg. Geol. (400-401-402) M. T. W.  11:30-12:30  6 h. a. w. 
Ap. Math. (524-525)  10:30-11:30  8:30-10:30, T. Th. S. Fall and Spring 
Ap. Math. (529)  12:30-1:30 
Civil Engrg. (703-718)  11:30-12:30  6 h. a. w. Winter 
Civil Engrg. (707)  12:30-1:30  6 h. a. w. Winter 
Mech. Engrg. (802-804-803)  10:30-11:30 
Mech. Engrg. (801)  12:30-1:30 
Elec. Engrg. (900-901-902)  4½  11:30-12:30  2:30-5:30, T. 
Exp. Engrg. (650)  6 h. a. w. Fall 
Exp. Engrg. (690-691-692)  11:30-12:30, W.  2:30-6:30, T. or Th. 
Elec. Lab. (950-951)  11:30-12:30, T.  2:30-6:30, M. or W. Winter and Spring 
Senior  Cost Accounting (21-22-23)  9:30-10:30 
Phys. Chem. (303-304-305)  12:30-1:30  2:30-5:30, T. Th. 
Quant. Anal. (318-319-320)  1 hr. to be ar'ng'd  2:30-5:30, M. W. 
Econ. Geol. (403-404-405)  10:30-11:30  6 h. a. w. 
Ap. Math. (528-527)  12:30-1:30 
Mining (541-542-543)  11:30-12:30 
Civil Engrg. (701-705-716)  12  10:30-11:30  12 h. a. w. Spring 
Mech. Engrg. (810-811-812)  8:30-9:30  6 h. a. w. 
Elec. Engrg. (903-904-905)  4½  10:30-11:30  2:30-5:30, W. 
Elec. Engrg. (910-911)  10:30-11:30 
Exp. Engrg. (662-663)  11:30-12:30, T.  2:30-6:30, M. or W. or F. 
Exp. Engrg. (670-661-680)  11:30-12:30, Th.  2:30-6:30, M. or W. or F. 
Ry. Field-work (751)  1½  9 h. a. w. Fall 
Bridge Draw. (755)  12  12 h. a. w. Winter 
Elec. Lab. (953-954-955)  11:30-12:30, Th.  2:30-6:30, T. or Th. 

29

Page 29

UNIVERSITY OF VIRGINIA DEPARTMENT OF ENGINEERING
NEW CURRICULUM IN CIVIL ENGINEERING

               
Humanities  Mathematics and Science  Technical
Engineering
 
Freshman  English:
Rhetoric
Composition
Survey of
Literature 
Mathematics;
Trigonometry
Analytical Geometry
and College Algebra
Chemistry 
Plane Surveying
Mechanical Drawing
Descriptive Geometry
Drawing Laboratory
Field-work
Shop-work
 
Sophomore  Options:
History
or Government
or Commercial Law 
Mathematics:
Differential and
Integral Calculus
Physics
Mathematics Laboratory 
Elementary Mechanics
Materials of Construction
Elem. Ap. Thermo. 
Junior  English Literature
Options:
Economics
or Modern Language 
Graphical Statics
Structural Drawing
Hydraulics
Drawing Laboratory 
Highways
Water supply & Sewerage
Masonry
Road Materials Tests 
Senior  Cost Accounting  Applied Mechanics
Strength of Materials
Mechanics Laboratory 
Elem. Ap. Thermo.
Curves and Earthwork
Bridges
Railways
Bridge Drafting
Railway Surveying
 
Degree of B.S. in Engineering on completion of Four-Year Course. 
Graduate  Elective:
Philosophy
or Architecture
or Fine Arts
or other subject
approved by the
Faculty of
Engineering 
Engineering Geology  Engineering Economics
and Specifications
Option:
Advanced Structural
Engineering and Highways

or Advanced Water Supply
and Sewerage
Electric Systems
C. E. Research 
Degree of C.E. on completion of additional Graduate Course. 

Practice courses are printed in Italics; courses with combined lectures and laboratory
work in Black Face Type.


30

Page 30

UNIVERSITY OF VIRGINIA DEPARTMENT OF ENGINEERING
NEW CURRICULUM IN MECHANICAL ENGINEERING

               
Humanities  Mathematics and Science  Technical
Engineering
 
Freshman  English:
Rhetoric
Composition
Survey of
Literature 
Mathematics;
Trigonometry
Analytical Geometry
and College Algebra
Chemistry 
Plane Surveying
Mechanical Drawing
Descriptive Geometry
Drawing Laboratory
Field-work
Shop-work
 
Sophomore  Options:
History
or Government
or Commercial Law 
Mathematics:
Differential and
Integral Calculus
Physics
Mathematics Laboratory 
Elementary Mechanics
Materials of Construction
Elem. Ap. Thermo. 
Junior  English Literature
Option:
Economics
or Modern Language 
Graphical Statics
Structural Drawing
Hydraulics
Drawing Laboratory 
Elem. Ap. Thermo.
General and Applied
Thermodynamics
Power Testing 
Senior  Cost Accounting  Applied Mechanics
Strength of Materials
Mechanics Laboratory 
Machine Design
Electric Systems 
Degree of B.S. in Engineering on completion of Four-Year Course. 
Graduate  Elective:
Philosophy
or Architecture
or Fine Arts
or other subject
approved by the
Faculty of
Engineering 
Theory of Machines
Adv. Ap. Thermo.
Industrial Management
Engineering Economics
and Specifications
Highway Transport 
Degree of M.E. on completion of the additional Graduate Course. 

Practice courses are printed in Italics; courses with combined lecture and laboratory
work in Black Face Type.


31

Page 31

UNIVERSITY OF VIRGINIA DEPARTMENT OF ENGINEERING
NEW CURRICULUM IN ELECTRICAL ENGINEERING

               
Humanities  Mathematics and Science  Technical
Engineering
 
Freshman  English:
Rhetoric
Composition
Survey of
Literature 
Mathematics;
Trigonometry
Analytical Geometry
and College Algebra
Chemistry 
Plane Surveying
Mechanical Drawing
Descriptive Geometry
Drawing Laboratory
Field-work
Shop-work
 
Sophomore  Options:
History
or Government
or Commercial Law 
Mathematics:
Differential and
Integral Calculus
Physics
Mathematics Laboratory 
Elementary Mechanics
Materials of Construction
Elem. Ap. Thermo. 
Junior  English Literature
Option:
Economics
or Modern Language 
Mathematics:
Differential Equations
Graphical Statics
Hydraulics
Structural Drawing
Drawing Laboratory 
Elements of Electricity
Direct Cur. Machinery
Periodic Currents
Electrical Laboratory
Supervised Problem Work 
Senior  Cost Accounting  Applied Mechanics
Strength of Materials
Mechanics Laboratory 
Elem. Ap. Thermo.
Alternating Current Machinery

Electrical Laboratory
Supervised Problem Work 
Degree of B.S. in Engineering on completion of Four-Year Course. 
Graduate  Elective:
Philosophy
or Architecture
or Fine Arts
or other subject
approved by the
Faculty of
Engineering 
Electrical
Measurements
 
Electric Power
Engineering Economics
and Specifications
Electric Transients
Option:
Illumination and Photometry
or Hydro-electric
Engineering or
Electric Traction
Option.
Thermodynamics with
Power Testing or
Electric Communication 
Degree of E.E. on completion of the additional Graduate Course. 

Practice courses are printed in Italics; courses with combined lecture and laboratory
work in Black Face Type.


32

Page 32

UNIVERSITY OF VIRGINIA DEPARTMENT OF ENGINEERING
NEW CURRICULUM IN CHEMICAL ENGINEERING

               
Humanities  Mathematics and Science  Technical
Engineering
 
Freshman  English:
Rhetoric
Composition
Survey of
Literature 
Mathematics;
Trigonometry
Analytical Geometry
and College Algebra
Chemistry 
Plane Surveying
Mechanical Drawing
Descriptive Geometry
Drawing Laboratory
Field-work
Shop-work
 
Sophomore  Mathematics:
Differential and
Integral Calculus
Physics
Qualitative Analysis

Mathematics Laboratory 
Elementary Mechanics
Materials of Construction
Elem. Ap. Thermo. 
Junior  English Literature
German 
Organic Chemistry
Graphical Statics
Structural Drawing
Drawing Laboratory 
Elem. Ap. Thermo. 
Senior  Cost Accounting  Quantitative Analysis
Physical Chemistry
Hydraulics
Hydraulics Laboratory 
Electric Systems 
Degree of B.S. in Engineering on completion of Four-Year Course. 
Graduate  Elective:
Philosophy
or Architecture
or Fine Arts
or other subject
approved by the
Faculty of
Engineering 
Applied Chemistry
Chemical Research 
Chemical Engineering
Principles
Engineering Economics
and Specifications 
Degree of Ch.E. on completion of the additional Graduate Course. 

Practice courses are printed in Italics; courses with combined lecture and laboratory
work in Black Face Type.


33

Page 33

UNIVERSITY OF VIRGINIA DEPARTMENT OF ENGINEERING
NEW CURRICULUM IN MINING ENGINEERING

               
Humanities  Mathematics and Science  Technical
Engineering
 
Freshman  English:
Rhetoric
Composition
Survey of
Literature 
Mathematics:
Trigonometry
Analytical Geometry
and College Algebra
Chemistry 
Plane Surveying
Mechanical Drawing
Descriptive Geometry
Drawing Laboratory
Field-work
Shop-work
 
Sophomore  Options:
History
or Government
or Commercial Law 
Mathematics:
Differential and
Integral Calculus
Physics
Mathematics Laboratory 
Elementary Mechanics
Materials of Construction
Elem. Ap. Thermo. 
Junior  English Literature
Option:
Economics
or Modern Language 
Graphical Statics
Structural Drawing
Drawing Laboratory
Engineering Geology 
Elem. Ap. Thermo. 
Senior  Cost Accounting  Economic Geology
Hydraulics
Hydraulic Laboratory 
Electric Systems
Mining 
Degree of B.S. in Engineering on completion of Four-Year Course. 
Graduate  Elective:
Philosophy
or Architecture
or Fine Arts
or other subject
approved by the
Faculty of
Engineering 
Advanced Economic
Geology
Mineralogy
or
Petrography
Qualitative Analysis
 
Engineering Economics
and Specifications 
Degree of E.M. on completion of the additional Graduate Course. 

Practice courses are printed in Italics; courses with combined lecture and laboratory
work in Black Face Type.


34

Page 34

UNIVERSITY OF VIRGINIA DEPARTMENT OF ENGINEERING
LECTURE HOURS AND EXAMINATION DAYS 1927-1928

                                         
MONDAY, WEDNESDAY, FRIDAY  TUESDAY, THURSDAY, SATURDAY 
Exam. Day  Lecture
Hour
 
Exam. Day 
Fall  Winter  Spring  Fall  Winter  Spring 
III  II  English (4-5-6)  8:30
to
9:30 
Commercial Law (13-14-15)  IV  III  II 
Mech. Engineering (810-811-812)  Qual. Analysis (315-316-317) 
IX  VIII  VII  Cost Accounting (21-22-23)  9:30
to
10:30 
IX  VIII 
Economics (10-11-12)  Government (16-17-18) 
Modern Languages (40-41-42)  Mathematics (100-106-107) 
Physics (200-201-202) 
VII  VI  Applied Mathematics (521-522-523)  10:30
to
11:30 
IV  III 
Civil Engineering (701-705-716)  Applied Mathematics (524-x-525) 
Elec. Engineering (903-904-905)  General Chemistry (300-301-302) 
Mech. Engineering (802-804-803)  Elec. Engineering (910-911-x) 
VI  IV  Elec. Engineering (900-901-902)  11:30
to
12:30 
VIII  VII  VI 
Engrg. Geology (400-401-402)  Organic Chemistry (309-310-311) 
Mathematics (108-109-110)  Civil Engineering (703-718-x) 
History (31-32-33) 
II  Applied Mathematics (528-x-7)  12:30
to
1:30 
Applied Mathematics (x-x-529)  IX 
English (1-2-3)  Civil Engineering (x-707-x) 
Mech. Engineering (x-801-x)  Engineering (526-715-800) 
Physical Chemistry (303-304-305)  Mathematics (111-x-x) 

The examination days for the various classes are fixed
by the hour of regular lecture period. The examination
day for a particular course is indicated in the table above
by the Roman numeral in the first or last columns, for
the corresponding lecture hours in the middle column.
The examination period covers ten days at the end of
each term. Examination days change each term.

A change in lecture for any course will change the examination
day correspondingly. Classes for which lecture
periods are not indicated will have examination days fixed
by the arranged lecture hour in accordance with above
schedule.

 
[2]

Starred courses involve laboratory work.

L. F.—Laboratory Fees.


35

Page 35

EXPENSES OF REGULAR STUDENTS

The average annual expense of a student who pursues the regular course
in Engineering will be:

               
NonVirginians  Virginians 
University Fee  $ 60  $ 50 
Tuition  160  120 
Laboratory Fees (average)  35  35 
Living Expenses (for nine months)  400  400 
Books and Drawing Materials  30  30 
Incidental Expenses (for nine months)  60  60 
Total annual for average conditions  $745  $695 

The charges for Tuition are uniform to all students, except that Virginians
are relieved of tuition on courses offered in the College, this exception
saving regular Freshmen from Virginia $110 and all other Virginia students
$75 each year in comparison with non-Virginians.

The laboratory charges are $15 per class for the year's course in Physics,
and $20 per class for a year's course in Chemistry. A deposit for breakage
of $5 is required for each laboratory course in Chemistry. The fee for
each practice course in the Engineering Department, Drawing, Engineering
Laboratories, and Shop-work is $5 per term for each course. The fees for
Field-work and Bridge Drafting are each $10 per term per course. These
fees include all charges for laboratory materials; but the student is held further
responsible for breakage.

The Living Expenses include board, lodging, fuel and lights, servant and
laundry; the average is $10.00 per week, the minimum $7.50, and a reasonable
maximum $12.50. Books and Drawing Materials will cost about $120
for the four-year course. Incidental Expenses ought to be kept within modest
bounds; the above estimate is sufficient; large allowances of pocket
money promote idleness and attract companions of the baser sort. No allowances
are included for clothing and travel, the expenses for which vary
too much to be introduced into any general estimate.

The charges payble on entrance are the University Fee, and the Tuition
and Laboratory Fees.

EXAMINATIONS AND REPORTS

Oral examinations are held at the beginning of each lecture hour on the
topics of the preceding lecture. Written test papers are set monthly, or at
such interval as the professor may appoint. Absences from lecture except
by reason of sickness are not excused without a written leave from the
Dean. Class standing is determined on the basis of the oral examinations
and the written tests. Absence from the latter or failure to answer incurs
a zero grade. Absences from laboratory periods, however caused, must be
made up by special private arrangement with the instructor.


36

Page 36

Written examinations are held at the end of each term on the entire
work of that term. The result of examination combined with the student's
class-standing gives his term-grade. The pass-mark is seventy-five per
cent. Absence from the written term examination incurs a zero term-grade,
which may not be removed except by the passage of a special written examination
on the work of that term. Such special examinations are granted
only upon presentation of a written certificate from a reputable physician
that the student by reason of sickness on the day of the regular examination
was unable to attend.

Regular Reports are sent out at the end of every term to the student's
parent or guardian. These state for each course followed the term-grade and
the number of absences. Further comment may be added by the Dean or
the professor, if it appears probable that such comment would be helpful to
the student. Parents are urged to examine these reports carefully and to
exert such parental influence as may seem needed to establish and confirm
the student in habits of industry and order.

Special Reports are sent to parents at the end of each month for students
delinquent in attendance or studiousness and for delinquents only.
When a student is making steady progress and showing due diligence in his
work, only the regular reports are sent. The receipt of a special report is
evidence that, in the judgment of the faculty, prompt and pointed parental
admonition is urgently needed.

If in any class in the Department of Engineering a student fails to make
satisfactory progress, he is first admonished by the professor in charge. In
default of prompt and permanent improvement, he is next formally warned
by the Dean. If due amendment is then not immediately effected, the student's
name is dropped from the rolls of the Department, on the ground that
he is not accomplishing the purposes for which he should have entered upon
a University course of study.

REGULATIONS

The following regulations, adopted to define the policy of the faculty,
are published for the information and guidance of the students:

1. Practice-courses as well as lecture-courses must be conducted under
the Honor System. The student who submits any work to be graded is considered
to submit it under pledge.

2. When the lecture-course and the associated practice-course are given
in the same term of the same year, no student will be admitted to examination
on the lecture-course until he has completed at least three-fourths of
the practice-course.

3. No student will be admitted to any practice-course unless he is at
the same time pursuing the associated lecture-course, or has already received
credit for the same.

4. No student will be admitted to the graduating examination on a


37

Page 37
lecture-course unless he has been present at more than half the lectures in
that course.

5. In the technical courses in Engineering (i. e., courses not given in the
College) term-grades shall not be averaged; except that the term-grades for
Freshman Applied Mathematics may be averaged for the first-year men
only, provided no mark is below 65.

6. The pass-mark in every course is 75. Class standing is estimated at
20 points; the written examination at 80 points.

7. No student who fails to make 75 on term-grade shall be granted another
examination on the course until he has again attended lectures on
that course.

8. Special examinations are not given except by reason of sickness on
the day of examination, attested by the written certificate of a reputable
physician, or for other like providential causes. In every case they must
be validated by special vote of the faculty.

9. A student whose term-grades average less than 40 for all the courses
in which he is registered shall be at once dropped from the rolls. If his
average is above 40 with no mark above 65, he is placed on probation.

10. A student on probation, who in the next term makes less than 65
on each and all his courses, shall be at once dropped from the rolls.

11. The Dean's List.—A student, who, in any session, passes on all
courses taken, aggregating not less than 18 session-hours, with an average
grade on all courses of not less than 82 per cent, will be placed on the
Dean's List. A student, who, in any session, passes on all courses taken
aggregating not less than 18 session-hours, but who does not average 82
per cent, and who, in any subsequent term, passes on all courses taken,
aggregating not less than 18 term-hours, with an average grade on all 18
term-hours of not less than 82 per cent will be placed on the Dean's List.
A student will be automatically dropped from the Dean's List, if, in any
term, he does not pass on all courses taken, aggregating not less than 18
term-hours, with an average grade on all courses of not less than 82 per
cent. A student dropped from the Dean's List will be again placed on it
if he meets the above mentioned standard for a term. A student on the
Dean's List is not subject to the regulations limiting the issuance of leaves
of absence from the University, nor does absence from any class entail on
such student any penalty, affecting class standing, imposed for absence
alone. Attendance on laboratory and performance of written problem or
quiz work are in no way affected by these regulations.

DRAFTING ROOMS

The drafting rooms are abundantly lighted and are provided with solidly
constructed tables with locked drawers for instruments and materials.
Each student is assigned to a table and has a drawer for his exclusive use.


38

Page 38
The regular Drawing Classes execute each one plate a week under the supervision
of the Instructors in Drawing. The more advanced students have
such additional drawings assigned by their respective professors as are
needed for the full development of the courses of study.

Careful attention is given to the training of the students in free-hand lettering,
in the conventional signs of mechanical drawing, in the proper layout
of drawings, and in neat and accurate execution. Exercises are required
also in tracing and in blue-printing, the rooms for which are conveniently
arranged and in close contiguity to the drafting rooms. A vertical
blue-printing machine with arc lamp, complete with trays, has recently been
procured and installed. While, however, technical dexterity is demanded,
the graphical method is taught and used primarily as an indispensable instrument
of research, the thoughtful mastery of which is essential for the
instructed Engineer.

The construction and theory of the Polar Planimeter, the Slide Rule,
and the Pantograph are carefully taught, and the student is trained in the
practical use of these appliances for the rapid and accurate production of
estimates and copies from finished drawings.

SHOPS

The Machine shop is provided with six first-class engine lathes, illustrating
the practice of the best American makers; with a planer, a shaper,
two drill presses, a universal milling machine (Brown & Sharpe), and a universal
grinder (same makers); also with a gas forge for tempering tools, a
cut-off saw for metal rods, an emery wheel, grindstone, and so on.

The wood shop is furnished with five small lathes, a large patternmaker's
lathe, a jointer, a planer, a saw bench for slitting and cross-cutting,
a band-saw, a jig-saw, and a wood trimmer for pattern-making, six cabinetmaker's
benches, and an ample supply of hand tools.

EXPERIMENTAL ENGINEERING LABORATORIES

Road Materials Laboratory.—The apparatus for tests of non-bituminous
road materials includes a two-cylinder Deval abrasion machine, a ball
mill, a moulding press for briquettes of rock dust, a Page impact cementation
tester, a Page impact toughness tester, a rock crusher and a Purdue
brick rattler. This outfit the University owes to the generous aid of the
late Dr. Logan Waller Page. In addition, the Department has acquired a
40,000-pound compression tester, a diamond core drill, a diamond rock saw,
a grinding lap, a Westphal balance, specific gravity apparatus, and a complete
set of sieves. Useful researches in the road-building rocks and gravels
of Virginia, as well as the standard tests, are conducted each year by the
class in Civil Engineering.

The apparatus for tests of bituminous road materials includes the New
York Testing Laboratory penetrometer, the Kirschbaum ductility machine,
the Engler viscosimeter, the asphalt viscosimeter, the New York Testing


39

Page 39
Laboratory extractor, the New York State Board of Health oil tester, Hubbard
pyknometers, asphalt flow plates, gas and electric hot plates, and the
accessory apparatus needed for research on bituminous road-binders.

Structural Materials Laboratory.—The Sinclair Laboratory for work
in testing structural materials was founded on the original donation of Mrs.
John Sinclair, of New York City, as a memorial to her late husband. The
collection has since been considerably enlarged. It contains a Riehle
100,000-pound machine, arranged for tensile, compressive, and transverse
tests, with an attachment for taking autographic diagrams; an Olsen
100,000-pound machine and fitted with a suspended ball compression block;
a 200,000-pound Olsen machine suitable for compressive tests and also
supplied with extension arms for making transverse tests of beams; an
Olsen torsion machine of 50,000 inch-pounds capacity; an Olsen impact-testing
machine of 100 foot-pounds capacity; a Ewing machine for
finding the modulus of elasticity; hand machines for testing rods and
wires under pull, and small specimens of timber and cast iron under transverse
loads. It is also equipped with accessory measuring instruments;
these include a Henning extensometer, an Olsen compressometer, and a
Ewing optical extensometer of great delicacy.

The laboratory is completely equipped for making tests of cement, cement
aggregates, and concrete. It contains a Fairbank's tensile tester of
1,000 pounds capacity; an Olsen steaming oven for accelerated tests; an
Olsen drying oven with automatic temperature regulation; moist air closets;
sieves for mechanical analysis; moulds for tension and compression
tests; and the required small apparatus.

Fuel and Oil Laboratory.—For the determination of the heating value
of coal, petroleum, etc., the laboratory has an Emerson bomb calorimeter.
For gas and liquid fuel calorimetry, a Junker calorimeter made by the
American Meter Co. is used. The equipment also includes a Braun gas
muffle furnace, a Brown high resistance pyrometer, balances, platinum
crucibles, etc. For investigating lubricants, the laboratory is equipped with
such apparatus as flash and chill point testers, hydrometers, viscosimeters,
etc., used in the determination of the physical properties of oil.

Hydraulics Laboratory.—The laboratory equipment for work in hydraulics
comprises a steel tank for weir experiments with interchangable
bronze notches; a hook gauge for measurement of surface levels; a standpipe
provided with a set of standard bronze orifices for experiments on efflux;
commercial pipe and elbows arranged for determining friction losses;
Gurley current meter; and the necessary scales, tanks, manometers, etc. It
also includes a pump which is piped to circulate water from a cement cistern
to a tank in the attic of the building.

Additional equipment of this laboratory is a motor driven centrifugal
pump with a capacity of 350 gallons per minute at 100 feet head, equipped
with a Venturi meter and the necessary piping, valves and gauges to provide
for complete performance tests on the pump. This unit also supplies
water at constant pressure for the other hydraulic tests.


40

Page 40

Power Laboratory.—The laboratory is equipped to illustrate the theory
involved in Mechanical Engineering; to give practical instruction in the
handling of machinery; and to teach the fundamental methods of experimental
work. It contains a Ball high-speed engine; a De Laval turbine
with condensing and non-condensing nozzles, which is direct-connected to
a 20-kva. alternating-current generator; an Otto gasoline engine with a special
piston for alcohol; a White and Middleton 12 HP. Engine (gasoline
or illuminating gas); a Wheeler surface condenser to which the exhaust
from any of the steam units may be connected; a Sturtevant blower; an air
compressor; an A. B. C. Pitot tube; a steam pump; steam traps, etc. For
boiler tests, the boilers of the University Heating and Lighting Plant are
used.

The instrument room contains all necessary apparatus for carrying out
complete tests. Among this may be mentioned indicators, thermometers,
gauges, planimeters, with standards for their correction and calibration; two
types of Orsat apparatus; separating and throttling calorimeters, etc.

FIELD WORK IN CIVIL ENGINEERING

The outfit of field instruments contains compasses, transits, and levels
of various approved makes; a solar transit, furnished also with stadia wires
and gradienter for tachymetric work; a Gurley mining transit, one of the
finest products of the instrument maker's art; a complete Gurley transit,
graduated to 30 seconds, with solar attachment; hand-levels and clinometers
for field topography; plane tables; a sextant; together with an adequate
supply of leveling rods, telemeter rods, signal poles, chains, tapes, pins,
and so on. For hydraulic surveys a hook gauge and a current meter are
provided. All students are instructed in the theory and adjustments of the
field instruments and in their practical use in the field. They are also required
to make up their field-books in standard forms; to reduce their
surveys and execute all the necessary profiles, plans and maps; and to
determine lengths, areas, and volumes both from the maps and from the
original notes. Polar planimeters are provided for facilitating such estimates,
and a pantograph for making reduced copies of finished drawings.

ELECTRICAL ENGINEERING LABORATORY

The Scott Laboratory of Electrical Engineering.—This laboratory was
initially equipped and endowed by Mrs. Frances Branch Scott, of Richmond,
Va., as a memorial to her late son, an alumnus of this University.
During the year 1910 the equipment was substantially increased through
the generosity of the Hon. Charles R. Crane, of Chicago, Ill., a friend of
the University.

Substantial additions of machines, measuring instruments, control apparatus,
and auxiliaries are being made regularly in order to keep the
equipment in the best order for laboratory work.

In addition to a supply from the University Power Plant the laboratory


41

Page 41
is furnished from the Virginia Public Service Company through a
synchronous motor driving an alternator and three-wire direct current
generator, with two exciters, all on a common shaft. A complete three-panel
switchboard for the control of this set is equipped with full sets of
instruments and controls including a voltage regulator for the alternating
current generator. The entire laboratory wiring has been renewed and the
floors have been treated to eliminate dust. Universal plug and receptacle-connections
facilitate the setting up of all experimental combinations.

For the machine testing there are available two direct-current motor
generator sets with automatic push-button start and stop control complete,
several direct current motors and generators, series, shunt and compound;
steam-turbine-driven three-phase alternator with exciter and control switchboard;
experimental test set for alternating current single or polyphase
generator operation or induction motor testing; a second test set with
modern switchboard control panel and driving motor with automatic start,
stop, and reverse equipment; single-phase repulsion-induction motor; two-and
three-phase induction motors; double-current generator; several pairs
of constant potential transformers; current transformer for constant current
service; mercury arc rectifier set; Prony brakes for all motors; variable
resistances; variable inductances and capacities; meters for measuring
frequency, power factor, and indicators of synchronism and grounded circuits.
A complete three-element oscillograph set with all accessories is
available.

In addition to full sets of electric meters with the appliances for testing
and calibrating them, galvanometers of the best modern types, standard
cells and resistances, standard condensers, and other pieces of apparatus
for minor tests, this laboratory contains numerous pieces of the very best
construction. Such are the Wolff potentiometer, the Seimens and Halske
Thomson double bridge, the Koepsel permeameter, the Station photometer
with Lummer-Brodhun screen, Macbeth illuminometer, the Carey-Foster
bridge and others.

BUILDINGS

The buildings devoted wholly or in part to the work of the Department
of Engineering are the following:

The Mechanical Laboratory is the main seat of the instruction in technical
studies. It is 180 by 70 feet and contains on the main floor the Dean's
office and the offices of three other professors; and three lecture-rooms.

Above are an office, a small drafting room for advanced students, and
blue-print and photographic rooms. Below on the ground floor are an office
and classroom, the electrical laboratories, the testing laboratories, apparatus
and storerooms, and the students' lavatory. In order to more adequately
care for increased numbers this building has undergone a considerable rearrangement
during recent years. Wood and machine shop equipment has
been entirely removed from the building, as well as the facilities for Freshman
and Sophomore Drawing. This change made available much needed
classroom space and allowed the electrical laboratories to be expanded. Incident


42

Page 42
to the changes new cement floors were constructed for the Road Materials
Testing Laboratory, the main testing Laboratory and the main hall.
A new high-pressure steam line from the Power House was also installed.

The Shops are now temporarily housed in the Garage erected for the
Motor Truck Training Detachment during the World War. This building
gives a floor space of some 5,000 square feet and has allowed the rearrangement
of wood and machine shop equipment for group drive by four electric
motors. Space is also available in this structure for use in connection with
the course in automobile construction and testing.

The Drawing Room is temporarily housed near Peabody Hall in one of
the Barracks taken from the Training Camp site and rebuilt and fitted for
drawing. The building accommodates about 180 men, each man having his
individual drawing desk.

The Power House is a single-story building 110 by 40 feet. It contains
the University boiler plant and the electric lighting plant. The Boiler
plant consists of two horizontal return-tubular boilers, each of 140 horsepower.
The lighting plant consists of three electric generators directly connected
to high-speed engines, the respective capacities being 25, 50, and
75 kilowatts. The whole plant is available for purposes of instruction,
study and experiment.

In addition to the University plants there are available by courtesy of
the owners for purposes of inspection, study and tests such plants as the
turbine station and railway and power substation of the Virginia Public
Service Company, the water turbines and oil engine plant of the Charlottesville
Woolen Mills, and plants of the local ice companies and cold
storage.

The Geological Museum is 120 by 50 feet. It is a three story building.
The main floor is devoted to the very extensive geological collection of
specimens, charts, relief maps, and so on. The gallery above contains an
equally good collection of minerals and numerous models of typical crystallographic
forms. The upper floor contains the lecture-rooms and the laboratories
of Economic Geology. In the basement are stored subsidiary collections
and new material accumulated in more recent geological surveys.

The Physical Laboratory faces the Mechanical Laboratory on the opposite
side of the quadrangle, and has almost the same proportions. The
main floor contains the lecture-room, the professors' offices, the laboratory
of experimental physics, and the storeroom for the very large collection
of apparatus used in the lectures. On the ground floor is the laboratory of
theoretical electricity, the storage battery room, a well-equipped shop for
the repair and manufacture of apparatus, and smaller rooms for the work
of graduate students.

The new Chemical Laboratory was opened for use in September, 1917.
In this fire-proof structure all the work in Chemistry is assembled. The
floor area provided is about 30,000 square feet. The lecture-rooms seat


43

Page 43
classes of 300, 75 and 25 students. The laboratories assigned to General
Chemistry, Organic Chemistry, Qualitative Analysis, Quantitative Analysis,
and Physical Chemistry contain 110, 60, 40, 30, and 20 desks. Altogether
by dividing classes into sections, 600 students may be accommodated.
Smaller private laboratories are provided for research workers. Large
stock rooms communicating by elevators with the several floors contain ample
stores of chemical supplies. The 5,000 volumes of books and bound sets
of journals constituting the Departmental Library of Chemistry are so
housed as to be accessible to both teachers and students.


44

Page 44

THE DEPARTMENT OF ENGINEERING

Special Students

       
Burnley, James Henry  Charlottesville, Va. 
Conlon, Bartholomew Frederick  Alexandria, Va. 
Minor, John Webb  Charlottesville, Va. 
Phillips, Walter Lee, Jr.  Richmond, Va. 

College Student in Engineering Courses

 
Ayres, Charles Lunsford  Richmond, Va. 

Freshman Class

                                                                     

45

Page 45
                                         
Abell, John Dean  Ivy Depot, Va. 
Allen, Harold Hayes  Churchville, Va. 
Andrews, Edwin Eads, Jr.  Charlottesville, Va. 
Bacon, Francis Page, III  Pass Christian, Miss. 
Bauserman, Willard Andrew  Woodstock, Va. 
Bloomer, Howard Bradley  Detroit, Mich. 
Bodner, Jack  Norfolk, Va. 
Brown, William Govan, Jr.  Concord, N. C. 
Chapman, William Rankin  Charlottesville, Va. 
Clark, Charles Cleaveland, Jr.  Chevy Chase, Md. 
Creecy, David Rice, Jr.  Richmond, Va. 
Davis, William Lee, Jr.  Portsmouth, Va. 
Dent, John Clayton  Washington, D. C. 
Doherty, Frank Joseph  Proffit, Va. 
Dunham, Harry Stanley  Saltville, Va. 
Durston, Horace Nichols  Fort Worth, Tex. 
Every, Ernest Henry, Jr.  Melbourne, Fla. 
Flake, William Chappell, Jr.  Richmond, Va. 
Flippen, Oliver Garland, Jr.  Cumberland, Va. 
Galdós, Domingo  Havana, Cuba 
Gallagher, Philip A.  Portsmouth, Va. 
Gildea, Robert Edward Lee  Catonsville, Md. 
Godsey, James Snead  Cumberland, Va. 
Harding, Thomas Arthur  Petersburg, Va. 
Haring, George Donald  Hackensack, N. J. 
Hopper, Allen Norwood  Leaksville, N. C. 
Johnson, Alva Alexander  Mineral, Va. 
Jones, Julian Stuart, Jr.  Baltimore, Md. 
Kanter, Carl  Norfolk, Va. 
Kramer, Albert Jack  Winchester, Va. 
Lafferty, William Lightfoot  Crozet, Va. 
Mann, Hamilton Hirst  Staunton, Va. 
Marshall, Zanesville Jefferson  Earlysville, Va. 
Mayers, Drayton Alexander  Marion, S. C. 
Melo, Salvador  Tampico, Mex. 
Miller, John Henry, Jr.  Washington, D. C. 
Moore, Garnett Virgil  Buchanan, Va. 
Mount, Ralph Elmo  Andalusia, Ala. 
Puerschner, Karl Humphrey  Cranbury, N. J. 
Quarles, Gilford  Charlottesville, Va. 
Reed, Avery Henry, Jr.  Marion, Ky. 
Rice, Harold Oliver  Nebraska City, Nebr. 
Robertson, George Austin  Norfolk, Va. 
Rose, Frank William, Jr.  Washington, D. C. 
Rothenberg, Bernard Isadore  Richmond, Va. 
Rudacille, Brown  Willard, O. 
Scott, John Bernard, Jr.  Winter Haven, Fla. 
Self, Herbert Morley  Kearny, N. J. 
Sluder, James Thomas, Jr.  San Antonio, Tex. 
Smith, Charles Francis  Libertytown, Md. 
Strider, Isaac Henry  Kearneysville, Md. 
Turner, Thomas Selma, Jr.  Sandersville, Ga. 
Voorhies, Richard Crosby  Port au Prince, Haiti 
Walters, Marvin Rea  Charlottesville, Va. 
Woodbury, Rodes McDowell  Staunton, Va. 
Worrell, Rives Edward  Savannah, Ga. 

Sophomore Class

                                             

46

Page 46
                 
Calcott, Myers Whitnall  Norfolk, Va. 
Carter, Ivy Dufner, Jr.  Covington, Va. 
Coffman, George Edward  Farmville, Va. 
Copps, Daniel Carroll  University, Va. 
Dickinson, Charles Hughes  Charlottesville, Va. 
Ellis, George Lewis  San Antonio, Tex. 
Fravel, William Harry  East Falls Church, Va. 
Harmon, Charles Dorsey  Waynesboro, Va. 
Harwood, Harold Sherlock  Washington, D. C. 
Hinton, William Henry  Petersburg, Va. 
Holt, Harry Reginald  Keswick, Va. 
Hurt, William Whitmore  Marion, Va. 
Kyle, Bernard Jerry  Brandy, Va. 
Lawrence, Marcus Jay  Washington, D. C. 
Lee, Robert Erwin, Jr.  Charlottesville, Va. 
McMurdo, Charles Edward  Charlottesville, Va. 
Payne, John Fife  Mine Run, Va. 
Peach, Paul Selden  Upperville, Va. 
Pereda, Ramon Emilio  Juncos, P. R. 
Quarles, Lawrence Reginald  Charlottesville, Va. 
Rathbun, George Jay, Jr.  Easton, Pa. 
Richards, Edward Wilcox  Warrenton, Va. 
Sayers, Samuel Rush  Wytheville, Va. 
Seifried, Herbert George  Belleville, N. J. 
Sergent, Dave A., Jr.  Big Stone Gap, Va. 
Spratley, Ashby Whitehurst  Norfolk, Va. 
Symington, William Wallace, Jr.  Catonsville, Md. 
Thompson, Arthur Carl  Charlottesville, Va. 
Via, Warren White  Charlottesville, Va. 
Wilkinson, Claude Mallory  Richmond, Va. 
Williamson, Edwin Holt  Burlington, N. C. 
Wright, Hunter Samuel  Elk Hill, Va. 

Junior Class

                                   
Davis, Charles Hall, Jr.  Petersburg, Va. 
Dunlop, Alexander Harrow  Washington, D. C. 
Forsyth, Harry Douglas  Esmont, Va. 
Head, James William, Jr.  Barcroft, Va. 
Hutcheson, Charles Tazewell, Jr.  Massapequa, N. Y. 
Joachim, Edward Fruth  Charlottesville, Va. 
Macdonald, Donald Grant  Leesburg, Va. 
Meetze, Hugh Yost  Manassas, Va. 
Nixon, John William  Purcellville, Va. 
Petrescu, Ovid Stephen  Bucharest, Roumania 
Risher, Daniel Harrison, B.S.  University, Va. 
Rogers, William Minor Lile  Covington, Va. 
Seerie, Edward David  Denver, Colo. 
Stevenson, Edward Carl  Richmond, Va. 
Unger, Gilbert Carleton, Jr.  Richmond, Va. 
Webster, Daniel Thomas, Jr.  New York, N. Y. 
Williams, Harrison, Jr.  Leesburg, Va. 
Wotton, John Alfred, Jr.  Roanoke, Va. 

Senior Class

                             

47

Page 47
     
Bronaugh, Joseph  Northport, N. Y. 
Graham, James Montrose, Jr.  Richmond, Va. 
Hubbard, Edward Franklin, B.S. in Chemistry  Roanoke, Va. 
Hunt, Julius Franklin  Wingdale, N. Y. 
Lee, John Duval  Lynchburg, Va. 
Mathiasen, Herbert Walter  New York, N. Y. 
Moore, Stephen Nicholas, E.E.  University, Va. 
Motsinger, Armand Valery  Mitchell, Ind. 
Phillips, John Henry  Wintergreen, Va. 
Reed, Charles Boogher  Marion, Ky. 
Roth, Herman Moe  Richmond, Va. 
Sarmiento, José Antonio  Santo Domingo, Haiti 
Selden, Edward Worthington  University, Va. 
Selden, Robert Francis  Hampton, Va. 
Small, Robert Coleman  Richmond, Va. 
Spicer, Murray Stacy  Cismont, Va. 
Wise, Edward Crosby  Vera Cruz, Mex. 
Witt, Ralph K.  Roanoke, Va. 

SUMMARY BY STATES

                                                   
Alabama 
Colorado 
District of Columbia 
Florida 
Georgia 
Indiana 
Kentucky 
Maryland 
Michigan 
Mississippi 
Nebraska 
New Jersey 
New York 
North Carolina 
Ohio 
Pennsylvania 
South Carolina 
Texas 
Virginia  80 
Foreign: 
Cuba 
Haiti 
Mexico 
Porto Rico 
Roumania 
Total  129 
 
[1]

Absent on leave 1926-1927.