| ||
The Description of Non-Letterpress Material in Books
by
G. Thomas
Tanselle
One of the principal problems with which descriptive bibliography has to contend arises from the fact that books are made up of smaller units, each with its own separate history. The book as a whole may be regarded as a unit by the bookseller or the book-buyer; but, as with other manufactured products, its component parts are the units at earlier stages of production. Variations can therefore easily occur among copies of what is supposed to be the same "book," as a result of differences in the manufacturing history of the component parts or differences in their placement in the finished product. Bibliographers have given a great deal of attention to this problem in connection with the letterpress sheets in books and have classified the variations that may occur into those that produce "issues" and those that produce "states."[1] Mixtures of sheets from different impressions or of gatherings with canceled and uncanceled leaves are difficulties that bibliographers are accustomed to thinking about in a formal way.
Much less theoretical discussion has been devoted to the similar problems that are likely to occur when engravings, lithographs, and other materials produced separately from the letterpress sheets are intended to be bound with those sheets to form completed books. It is perhaps natural that variations among copies of the plates used to illustrate an edition of a work, or variations in the placing of those plates in different copies of the edition, have not generally been taken up in conjunction with variations in letterpress sheets. Inserted plates do seem to be further removed from the sheets than, say, a cancel leaf (or a whole cancel gathering) that was likewise printed separately from the rest of the sheets and inserted. One reason, of course, is that they normally result from a fundamentally different process of reproduction. When illustrations and
In some books, of course, it is hardly appropriate to call the non-letterpress portions "insertions," for they may constitute the bulk of the books. A volume showing an artist's work in the form of engravings, or an atlas of engraved maps, or a tune-book of engraved music, for instance, might have a letterpress preface. Such books are likely to be discussed and described by art historians, cartographic historians, and musicologists, who bring to the task the traditions and vocabularies of their own fields, often derived from thinking about the engravings as separate pieces. That their language is sometimes different from that of bibliographers accustomed to dealing with printed books may be an inconvenience but is perhaps not a serious matter, since usually one can quickly learn to make the necessary adjustments. What is more important is that terminology reflects an underlying approach to the material; bibliographers and cartographers, for instance, may find themselves talking
I
In 1974 two works appeared that attempt to deal with the problems of bibliographical classification in cartography and musicology, and they can provide an instructive introduction not only to recent thinking in those fields but also to the nature of the difficulties such an undertaking entails. One is Coolie Verner's paper on "Carto-Bibliographical Description: The Analysis of Variants in Maps Printed from Copperplates," in the inaugural number of the American Cartographer (pp. 77-87); the other is the substantial volume that D. W. Krummel compiled for the International Association of Music Libraries, the Guide for Dating Early Published Music: A Manual of Bibliographical Practices. Both deserve credit for being pioneer efforts and for focusing attention within their fields on important but neglected questions; both also have short-comings, as their authors would no doubt agree, and a consideration of certain of those flaws can, I hope, serve a constructive purpose. I find
Verner, after explaining the kinds of events that occur in the history of individual plates of maps, concludes, "Terms used in descriptive bibliography [i.e., of letterpress books] are not applicable to cartobibliography because the precise conditions described by a term in the one are not found in the other" (p. 84). This statement, on the face of it, raises a number of problems. If indeed the "precise conditions" are so different, then of course different terms are desirable. But that observation hardly gets us very far. It is true that some terms used in the description of books have been employed with different meanings in the description of maps, and there is of course an awkwardness in such a situation. But to conclude that the same terminology will not fit both kinds of material is not a very productive solution: one of the goals of bibliographical description, as of other kinds of historical research, is to find connections, or patterns, or organizing principles, in the mass of surviving evidence. Even though letterpress is a relief process (or, in its more extended sense, a planographic one as well) and engraving an intaglio process, both involve presses of some sort and the transfer of inked images. It would seem profitable, therefore, to proceed from a premise of underlying similarity rather than to emphasize differences of detail.[4]
For example, in his brief discussion of issue, Verner cites definitions by McKerrow and Bowers and then concludes, "In view of the precise meanings attached to the term issue in descriptive bibliography and its inappropriateness for carto-bibliography, this term should not be used in describing maps" (p. 86). Why it is inappropriate for cartobibliography is not analyzed; instead there is the flat statement that the "very specialized application" of the term to letterpress material has "no corollary in carto-bibliography." Although there has been some difference of opinion about exactly how issue should be employed in the description of books, the various definitions share a common theme: an issue is a publishing unit within an edition or a printing, and variant features that provide evidence of publishing or marketing decisions (such as a cancel title leaf with a different publisher's imprint or an inserted series designation) are determinants of issue.[5] In the case of an individual map, the substitution of one publisher's or bookseller's name for another by means of a paste-over cancel would create a different issue; and even if situations producing issues are not common in connection with the publication of separate maps, the possibility of such situations should surely be recognized in any theoretical framework for classification. Furthermore, when several engraved maps are fastened together as a unit, they become in effect a book, and the concept of issue is as relevant to such books as to letterpress books. Issue, of course, refers to whole entities as they are made available for sale, not to particular constituent parts of them, and engraved maps inserted into letterpress books may become elements in one or another issue of those books; indeed, their presence could conceivably be the factor determining issue, if copies of the letterpress sheets were also published without the maps. Although variants in individual maps are not necessarily involved here, the point is that the concept of issue cannot be regarded as irrelevant to the study of the way maps are published.
The logic of Verner's discussion of edition is equally questionable, but his comments do serve to illustrate still more of the problems involved. Verner says that the definition of edition by McKerrow and
Another is the idea that edition is synonymous with "plate" and "therefore redundant." It is true that "plate" is often used to refer to individual finished products rather than to the copperplate itself: we speak of a letterpress book illustrated with "plates." In this sense all the "plates"—that is, all the copies of an engraving—produced from a single copperplate would be analogous to a letterpress edition (all the copies from a given setting of type).[7] But this use of "plate" is not what Verner has in mind. "In carto-bibliography," he says, "the term plate applies specifically to the wood block, copperplate, or lithographic stone used to print a given impression of a map" (p. 85). In that case it is difficult to see how "plate" renders the term edition redundant, for the former refers to a printing surface and the latter refers collectively to all the copies printed from a particular printing surface. Edition in letterpress terminology does not, after all, refer to type formes but to all the sheets of paper that have been printed from a given set of such formes.[8] Precision
Perhaps Verner intends to make a similar point when he admits that edition should be used "with reference to a given group of impressions of a map." But the definition he approves for this purpose creates further difficulties: "all of the impressions [copies] of a map printed from any given state of a plate."[9] The result of this definition would be that a single copperplate could result in more than one edition. Since edition has been more widely used for books than for engravings and since the meaning of the term in that connection is well established, it would seem to be foolish, when applying the term to engraved material, to support a usage that is not parallel to the usage for books. There is surely a convenience in having a term to refer to everything produced from a single plate, stone, setting of type, and so on, and edition would seem to be the clear-cut choice for this term. Equating an edition of an engraving with a single state of a plate (whatever "state" means) can only invite misunderstanding.
What Verner means by "state" is of course relevant to understanding his comments on edition. He believes that there is "essentially more agreement between descriptive bibliography and carto-bibliography with respect to the meaning attached to the term state than to any other terms used conjointly" (p. 85). In carto-bibliography, he says, "state identifies and designates a particular period in the life of the plate; during another state the plate will differ from the preceding in some particulars." Any difference, in other words, produces a new state. Those accustomed to talking about letterpress material would be more inclined to think of state as referring to the printed pieces produced. This point is not of great moment, since normally a different state of type-impressions on a piece of paper results from a different state of the type.[10] (There is a more substantial point involved, however: description, whether of books or of maps, has as its primary focus the finished products, which in any case are generally the only evidence one has. When a copperplate or a stereotype plate has survived, it can be described, but such description is subordinate to the main business of bibliographical or carto-bibliographical
In letterpress bibliography, issue and state are subordinate to printing, when an edition consists of more than one printing. For Verner this point is unnecessary, because he dismisses the concept of printing as irrelevant to the study of engraved maps. A printing has traditionally been defined as all the copies printed from a setting of type at one time— that is, in a single press run. Verner asserts, "This is not a pertinent characteristic in the study of early printed maps, since it is impossible to identify with certainty what copies were pulled at the same time so long as the plate was not altered by plate changes" (p. 85).[13] (One might
There is a difficulty of terminology that must be faced in connection with printing. Descriptive bibliographers of books have traditionally regarded impression as a synonym for printing, and publishers as well as bibliographers use impression to refer to a group of copies, not to individual copies. However, scholars of cartography and of art history, who regularly deal with engravings, have customarily employed impression to signify each copy made from a copperplate. One must admit that this usage has as much logic as the other—indeed, it probably has more. Each copy of a book is an impression from the type, just as each copy of an engraving is an impression from the copperplate. The only problem is one of convention: impression is not conventionally used to mean "copy" by bibliographers of letterpress. This difference of usage is awkward, but nothing more: it does not reflect any underlying differences
That Verner's attempt to do the latter leaves something to be desired is further illustrated by his definitions of four terms that he says "are applicable only to printed maps" (p. 86). It is worth looking at these definitions, for their deficiencies are instructive, particularly in regard to the question whether description is to be focused on the copperplate or on the copies made from it. The first of these terms is "change": "Any alteration effected to a plate which prints on successive impressions pulled after the change is made constitute a plate change and create a new state of the plate."[14] This statement perfectly illustrates the problem through its inclusion, as a restrictive clause, of the words "which prints on successive impressions pulled after the change is made." By shifting here from the plate to the impression, the sentence succeeds only in making the nonsensical assertion that plate changes are changes that show up in printed copies made from the plate. Obviously one could change a plate and never print from it, but it would be no less a change for that. The fact of a change in the plate is not tied to whether the plate is actually printed from, though of course normally the only evidence one has for a plate change is a surviving impression made from that plate. One can legitimately say that two states of the impressions made from a plate, if they are of a certain kind,[15] are evidence of a change in the plate; but one cannot turn the point around and say that changes in the plate are changes for which evidence exists in printed impressions. The illogic of Verner's statement derives from a wavering as to whether he is talking about plates or impressions from them.[16] If his focus had been consistently
His definition of "variant copy" suffers in the same way. "The term variant copy," he says, "is used to identify an impression which can be distinguished from another one pulled from the same plate and state, where the differentiating characteristics occur on more than one such impression and do not result from alterations to the plate itself as in the case of watermarks in the paper." Because his emphasis in defining state and "change" is on the plate, he feels the need for a term to refer to other changes that affect the finished product. But if he had kept that product at the center, he could have recognized more easily that differences in the plate and differences in the paper both produce differences in the resulting artifact and that it is logical (if perhaps unconventional) to regard both as resulting in different states of the finished prints. Indeed, either could result in different issues as well as states: the use of two different grades of paper, for example, might signify two issues just as much as might certain kinds of changes made in the plate. Because the use of state to mean "state of the plate" is so well established among those who write about engravings, one will no doubt have to speak of "state of the print" (or some such term) when one is referring to the printed piece of paper. But logic dictates that state and issue, as terms for the classification of artifacts, must encompass all kinds of differences present in the artifacts at the time of their release to the public. This approach does not of course result in any blurring of the distinction between differences in the plate and differences in the printing, for the features determining issues and states would obviously be recorded in any description; what it does is provide a logical framework for showing relationships among printed copies, taking into account the paper and the inked impressions that together make up those copies. The term "variant copy," as Verner defines it, thus seems unnecessary; as a technical term it is unwise because it is conceived too broadly to make the distinction between issue and state. Not the least curious aspect of his
The two remaining terms, "ectype" and "piracy," raise a somewhat different problem, but one of equal importance from a theoretical point of view. "The term ectype," Verner announces, "is used to identify a particular plate of a map which is very similar to that which it replicates but differs from the original only with respect to bibliographical details." He then adds, "This term has no counterpart in descriptive bibliography." The reason it has no counterpart is not that there is no parallel situation but that, as defined here, the concept is confused. If a plate is "very similar" to another one, it is nevertheless a different plate—just as a plate of a map representing a totally different geographical area would be a different plate. What links the two "very similar" plates together is their content—or what in connection with letterpress books might be called the "work" embodied in the physical object. It is conventional to distinguish between a "work" (an arrangement of words and punctuation) and a "book" (a concrete object that embodies one representation of a work). When a verbal work is set in type a second time, the resulting edition may be just as different from the first in typography, paper, and binding as an edition of some other work; it is related to the first only because the arrangement of type-impressions in it is meant to be a representation of the same work. In the case of maps, one would have to define what the counterpart of "work" would be. It would obviously not be simply a question of geographical region, scale, projection, and so on, but of individual attempts at such delineation. Defining what is meant by the "same" work or deciding when a version becomes "another" work is a problem relevant to all fields. Is is a problem, however, that relates to intellectual content rather than to physical form.
Bibliographers of books have not needed a word like "ectype" because their basic terminology relates to the physical aspects of books, and different settings of type are different editions regardless of the content of what is set; when they need to discuss several editions because those editions contain the same work (and they do, of course, have to decide what texts can be regarded as versions of the same work), it seems sufficient to refer to the first edition, second edition, and so on, of that work. The trouble with a term like "ectype" is that it joins considerations of content and of form: it refers not only to a separate edition (a distinct plate) but one that at the same time is related in content to another one.
This point can be illustrated by considering Verner's fourth exclusively carto-bibliographical term, "piracy": "The term piracy applied to a particular plate of a map which is so like the original which it replicates that it is apt to be mistaken for that original but which was issued by a publisher other than the one who published the original map" (p. 86). If "piracy' 'is supposed to indicate an unauthorized edition, as the word would naturally suggest, the definition does not make the point clear. For is it not possible that an authorized publisher could use a new plate so close to the original that it is "apt to be mistaken" for it? Can an ectype—a plate "very similar" to another but clearly distinguishable from it—never be pirated? The terms are not mutually exclusive, for they mix up considerations of similarity of content with circumstances of publication. It would seem to be more sensible for the basic terms of bibliographical classification to refer strictly to physical evidence; these terms can then be modified, as the occasion warrants, with adjectives that express various other considerations, reflecting publishing circumstances or characterizing content, as in "English edition,"
Verner in effect recognizes this point when he says that a piracy "should be designated as one of the plates of the original with the added designation of Piracy, e.g., PLATE III, Piracy" (p. 79)—which is parallel to such a phrase as "third edition, pirated." The third act of engraving of a particular map (a "work"), like the third act of typesetting of a verbal work, produces the third plate or third edition of the work, whether or not it is "pirated." But these clear lines are blurred by Verner's definition of a piracy as a "copy of a map that is so like its prototype that the two might be confused." One of course hopes that a bibliography, by setting the facts straight, will provide the means for distinguishing among items that might be confused; but the bibliographer's assessment of potential confusion cannot be the basis of bibliographical classification or the determinant of a piracy. This curious emphasis recurs in other statements: "The inclusion of such piracies in the description of an original map also eliminates the possibility that the copy might be considered to be a different map, thus acquiring validity as an historical document which it does not actually possess." The acquiring or losing of "validity" does not affect classification, nor therefore the arrangement of entries implied by the classification; if a particular piracy is found to be the third engraving of a work, then it naturally falls into the position thus dictated, whether its stature is enhanced or lowered by that placement. In any case, a piracy, simply because it may have been intended to be taken for something other than what it is, does not thereby lose "validity as an historical document." It exists; it played a role in the publication history of the work; and it is therefore a historical document. The fact that it is not the first publication of the work does not deprive it of validity as a document—though of course its significance will vary depending on the purposes for which one turns to it as documentary evidence.
Verner's paper obviously serves a useful function in focusing attention on some central issues in the description of engraved material, but
We can pursue this line of thinking further by turning to the other 1974 work mentioned earlier, D. W. Krummel's Guide for Dating Early Published Music. In the section entitled "Differences between Copies" (pp. 30-48), Krummel[20] takes up questions of bibliographical classification, and from the outset we know we are in the presence of a person who has given sustained and methodical thought to these matters. A carefully balanced note at the beginning reports that some music bibliographers doubt whether "the terminology of general bibliography, growing out of experience with literary texts, mostly printed from movable type, should be used for musical editions, mostly printed from engraved plates"; but it concludes unequivocally: "The present study," Krummel says, "endorses the use in music bibliography of the terms of the general bibliographer."[21] The argument leading to that conclusion
After defining edition, Krummel goes on to take up issue, state, and impression, in that order. His discussions are thoughtful, as one would expect, and (with one significant exception, to which I shall return) they reflect the standard definitions as commonly understood by letterpress bibliographers at the time Krummel was writing. His comments on issue (pp. 31-32), for example, are "quoted and paraphrased from
Krummel's discussion of state raises a few additional questions. He equates state with "variant" and defines it as "any form of musical publication which exhibits variations in content caused by purposeful alteration
The fourth standard term that Krummel takes up is impression,
Krummel proceeds to the difficult question of the integrity of copies. Although he deals with it briefly and from the point of view of cataloguers (likely the main component of his audience) rather than bibliographers, he does recognize the logical necessity of moving on to this matter. First he seeks to define copy and rather puzzlingly offers two very different definitions, adding that the second "would appear on general principles to be the better one to follow" (p. 46). It certainly is the preferable one: it defines a copy as comprising "whatever was known or likely to have been offered for sale in the earliest copy . . . including wrappers, catalogues, and the like."[31] The earlier definition takes copy to exclude wrappers, catalogues, and "other material superfluous to the content and the publishing event." But one is dealing with published items, and if a catalogue or a publisher's wrapper or casing was part of the entity as published, then it is part of "the publishing event," whether or not it is "superfluous to the content." However, the question of determining what in fact was a part of a copy as published is a central one in connection with books not in publishers' casings, especially when those books contain both letterpress and engraved material or consist of items also made available separately. As an illustration of the view that often "the precise entity is impossible to determine," Krummel cites the libretto of Don Giovanni, which "may, or may not, be seen as
The contrast between Krummel and Verner could hardly be more striking. Krummel's discussion is clearly the more reasoned and thoughtful; and, even if it requires some modification here and there, it demonstrates a sound and fruitful basic approach. But the process of examining the arguments of Verner, in addition to those of Krummel, has served, I hope, to show what the principal issues are. Underlying everything else are the opposite positions these two writers take on the question whether the terms—and therefore the concepts—of classification in letterpress bibliography are applicable to non-letterpress material. The answer to this question, as I trust the present discussion has shown, cannot really
Another central point is that bibliographical description in all fields must be concerned primarily with the printed items themselves, not with the printing surfaces that produced them. The bibliographer can infer certain facts about the plates, types, or stones from the finished product; but that product is the primary evidence, capable of being examined directly by the bibliographer, and is the object of the description. That the bibliographer's focus must be on the published entity is particularly obvious when one considers publications that consist of more than one unit—several letterpress sheets, or letterpress sheets joined with engraved music, maps, or illustrations. In these cases, although one must try to do justice to the component parts, one must also account fully for the composite entity, which is a fact of publishing history. Some parts of a book may have had a separate existence, as independent
The classification of a published entity, therefore, cannot be governed by the classifications that may have applied to certain of its parts that were made available to the public separately. For example, since issue and state refer to variations within printings, the insertion of a particular issue of an engraving in all copies of a given printing of letterpress sheets does not result in any differences among copies. The fact that the map, say, was also available separately—and, as a separate, was a second issue—could appropriately be pointed out in the description of the inserted plates in the volume; but the volume as a whole would simply be a first printing, one of the characteristics of which is the inclusion of a map that—as far as its own separate history is concerned— is a second issue. If some copies of the first printing of the book contained the second issue of the map and others contained the first issue, the difference would have to be taken into account in the description of the book, since there would then be a variation distinguishing some copies from others within the same printing; but the result would not necessarily be two issues of the book, simply because two issues of the separate map were involved. There would be two issues only if the use of the second issue of the map became the occasion for a separate publishing effort (indicated, among other possible ways, by a cancel title, perhaps referring to the particular issue of the map included). Otherwise there would be a single issue (that is, a single printing) of the book, in which the map appears in variant states, indentifiable as the first and second issues of the separate map. Whatever created the second issue of the separate map (perhaps a different imprint) does not create an issue of the whole book unless the publisher calls attention to it as characterizing a discrete group of copies. Similarly, if copies of a single issue of the separate map are included in all copies of both the first two printings of the volume, the result is simply two printings of the volume; the presence in them of the same issue of the map does not make all copies
One should not conclude from these hypothetical examples that letterpress sheets take precedence over non-letterpress material in bibliographical classification. So long as we are talking about non-letterpress "insertions" into books that are largely made up of letterpress sheets, there seems nothing odd in allowing the letterpress material to play a determining role; but many books exist in which the engraved plates bulk far larger than the letterpress sheets (books of engraved music with letterpress prefaces, for instance, or suites of illustrations with brief introductory texts in letterpress). In any case, the relative quantity of the letterpress and the non-letterpress material is not the only factor to consider; equally important is whatever element—most commonly the title page—serves to define the book as an entity. Thus if a cancel letterpress title leaf, with a different publisher's imprint, is inserted into the sole letterpress gathering at the beginning of a volume consisting otherwise entirely of engraved music, a new issue is created, even though the engraved material is dominant in the volume and is invariant. If instead to accomplish the same purpose the entire letterpress sheet (gathering) were reset but the engraved music were still from the original printing, the result would still be an issue—not a new edition, even though the preliminary gathering would be a new edition, since the body of the book would still be of the original printing. Both the bulk and the title page play a role: that the reset material is such a small fraction of the volume (whether the rest is engraved is actually irrelevant) means that a new edition has not been created, even though the reset part includes the title page; and the existence of the new publisher's imprint in the
Nor is there any point here in outlining further examples or kinds of situations: the number of possible permutations is large, and enough has been said to suggest how they can be dealt with by a consistent application of the principles underlying the basic concepts of bibliographical classification. Any system for handling non-letterpress insertions in letterpress books must be applicable as well to the more general problem of composite volumes containing items (whether or not printed from a different kind of surface) that have had an independent publication history. Judgment is involved in applying terms like edition and issue to these volumes, and bibliographers will not always agree in their assessment of complicated situations. But if they understand the basic concepts of classification and recognize the double level of classification required when independent entities are incorporated into larger entities, they are sure to clarify the publication histories of the volumes they describe. The object, after all, is to explain a course of events as clearly as possible to the reader, and one is free to use phrases and sentences in addition to the basic terms. Attempting to assign terms like edition, issue, and state should not be an exercise in applying arbitrary definitions but should be a process that allows one more clearly to see, and express, relationships. The same kinds of relationships exist among the elements of composite volumes in all fields; and asking all bibliographers—regardless of the subject matter they specialize in—to work within this one framework of classification is not to impose restrictions on them but to assist them in making their labors as productive as possible.
II
After one has thought about these questions of classification, the next step is to consider what pieces of information regarding non-letterpress material ought to be recorded in a descriptive bibliography and where
J. D. Cowley, in Bibliographical Description and Cataloguing (1939), provides a brief section on "Plates and Insets" (pp. 105-106), which begins rather shakily but recovers in the second of these sentences: "Typographically, I suppose, books may be held to be complete without any plates that they may be intended to have when they are published, because the plates are printed separately and are not included in the signed gatherings. But since in bibliography we are describing books as they were published, we must account for the plates in the technical note." His view is that they should not be included in the formulaic signature collation but should be entered in the form of a brief register (e.g., "plates, Front., I-VI") following the pagination statement, with a description "in a separate paragraph dealing with illustrations or in the analysis of the contents." Although he does not recommend giving the location of plates (normally, at least before the nineteenth century, "it is practically impossible to determine the exact position which any particular plate or inset was intended to occupy"), he suggests, somewhat inconsistently, that inserted maps, tables, and the like, not part of a regular sequence of plates, be specified by location ("plates [6]; inset tables following pp. 56, 72, 104").[37]
Ten years later Fredson Bowers, in Principles of Bibliographical Description (1949), also devoted very brief space to engraved title pages and plates (see especially pp. 287-289 and 446), but what he says is characteristically incisive and logical and provides a sound basis to build on. His recommendations are essentially the same as Cowley's, except that he stipulates the recording of the positions of plates—as in "plates [3] (opp. sigs. C4v, F1, G4v)"—using signature or page references to the facing pages.[38] But he provides a more thoroughly reasoned statement of the desirability of limiting the signature collation to material that went through the printing press and of recording non-letterpress insertions separately. There is no question that signature collations, which can
The most thorough contributions to the question of the bibliographical study of inserted plates have emerged, not surprisingly, from the examination of botanical books. Unlike atlases and music books, in which engraved leaves often form a solid block of material without intervening letterpress leaves, botanical books consist of engravings inserted into letterpress gatherings often enough to make the problem of their relationship a pressing one; and unlike literary books, in which illustrations are often regarded as serving only a decorative function, botanical books normally contain illustrations that are essential parts of what the works as a whole are intended to convey. Gordon Dunthorne is generally recognized as a pioneer in the bibliographical treatment of plates in his Flower and Fruit Prints of the 18th and Early 19th Centuries (1938). He was writing before Cowley and Bowers, of course, and his work now seems rather rudimentary, although many more recent bibliographies have not been as detailed in their handling of plates. What he did recognize was the value of noting plate marks, imprints, and watermarks, and he attempted to work out a concise method for recording them (using abbreviations such as TC for "top center" to indicate positions on the plate). A more significant landmark is Allan Stevenson's work in the second volume (1961) of the Catalogue of Botanical Books in the Collection of Rachel McMasters Miller Hunt. The remarkable introduction to that volume, which in explaining the methods employed becomes a 65-page exposition of the fundamentals of descriptive bibliography, offers
The principal issues that emerge from these discussions can best be considered in two categories: those that have to do with the actual description of the non-letterpress material and those concerned with how to incorporate those descriptive details into the formal description of the entire book. The former are the more significant, because they are substantive, but the latter are not without substantive implications. Certain decisions about the substance of a description, of course, may obviate certain questions of form: if, for instance, the treatment of plates is reduced to the simple statement that there are so many engravings after paintings by a particular artist and so many after paintings by another, the question whether the information about plates should be presented all at once or distributed among the paragraphs of the description does not arise. And such brief statements may be regarded as appropriate on certain occasions. As with the other elements in a description, various levels of detail may be adopted, depending on the nature of the material and the primary purpose that the bibliography or catalogue is intended to serve.[44] The parts should normally be kept in proportion to one another, and if the letterpress is given abbreviated treatment, the plates should probably receive similar treatment. If the plates are the principal interest of the volumes and if the audience for the bibliography consists largely of art historians, there is naturally good reason to go into some detail about the plates; but in that case one should usually provide more information about the letterpress as well, recognizing that evidence from the one, as part of a combined object, may be relevant to interpreting evidence from the other. There is no doubt about the value to historical scholarship of bibliographies that describe rather than merely identify, and wherever possible descriptions should be conceived on a scale that will allow the treatment of plates to include the kinds of details to be enumerated below. In any case the cardinal rule, exemplified in Bridson's paper, is that descriptive bibliography cannot logically slight any element that goes to make up the finished book, and plates must be dealt with as fully as letterpress.
Stevenson designates four groups of "the main identifying and descriptive details" to be recorded in his plate descriptions: "1) designation of type of plate and range of subjects; 2) titles, artist signatures, imprints; 3) sizes of typical plates, in inches and tenths; 4) position of
Taking all these considerations into account, I would suggest the following as the categories of information to be provided in a detailed description of non-letterpress material in books. They need not be presented in this order or be separated into these nine units; and although the wording here applies most directly to individual illustrative plates, this outline can, I think, be readily adjusted to accommodate other kinds of non-letterpress material:
(1) The title, caption, epigraph, quotation, or other wording meant to identify, describe, or interpret the plate. This wording should be set forth in quasi-facsimile transcription, and a note should indicate what parts of it, if any, are in letterpress. For a book that contains a list of plates, any discrepancies between the wording on the plates and the wording of the citations in the list should be specified, as Bowers points out. When plates do not have titles or other descriptive wording, and often when they do, the bibliographer may well supply brief descriptions of the content of the plates.[46]
(2) The medium and process employed. As Bridson notes, one should attempt to go beyond such simple designations of medium as "engraving," "etching," and "lithograph" to specify the precise process used.[47] Analytical bibliography applied to plates, just as when it is applied to letterpress material, requires a detailed knowledge of the technical processes involved; without that knowledge recognition of variants and reconstruction of the history of individual plates are likely to be less accurate.
(3) Artists' names. Any artists' names that appear on the plate should be transcribed exactly as they appear. Although Stevenson quotes artists' and engravers' names in "an early or dominant form," with "slight variation" indicated by a superscript "±" (p. clxxi), important evidence may be thus concealed, and the names should always be "given verbatim, misspellings included," as Bridson says (p. 474). One should attempt to ascertain the names of the artist and the engraver when they do not appear, as well as the medium of the original work.
(4) Imprint. Any printers' or publishers' imprints should be recorded in quasi-facsimile transcription, and when they do not appear an effort should be made to establish the name of the printer (and of the publisher if the plate was also made available separately from the book that provides the occasion for the description). Small details in an imprint may of course be an important clue for dating. One should be particularly cautious in accepting dates printed from copper or stone (cf. Bridson, p. 475).
(5) Dimensions. Depending on the period of the book, something will have been said elsewhere in the description about the size of the leaves of the book or of the sheets used for printing. The point here is to indicate the size of the illustration and of the copperplate or other surface if its mark is present. Stevenson advocates recording plate marks (p. clxxi), whereas Bowers gives priority to the dimensions of the engraved surface (p. 179), although he suggests that both measurements be provided (with the vertical dimension of the engraved surface further subdivided according to what part is illustration and what part lettering). Both are indeed important, and Bridson further shows (p. 474) the usefulness (for distinguishing similar engravings) of noting the relative position of the engraved surface on the plate. Thus to Bowers's example for an engraved title—"plate mark 392 x 198 mm.; engr. tit. with lettering 223(261) x 156 mm." (p. 179)—one should add an indication of the distances to the edge of the plate on each side of the latter dimensions. One might even decide to combine all these figures in the form "60|223(261)| 71 x 15|156|27 mm.," where the figures to the left and right of the vertical lines are the distances to the edge of the plate (above and below, respectively, for the vertical measurement, and left and right for the horizontal). In addition to furnishing these figures, one should also describe the impression made by the edge of the plate, following Bridson's suggestion that it may be helpful to know whether the plate has "a plain or a bevelled edge or square or rounded corners" (p. 474).
(6) Typography or lettering. Any letterpress typography should be described, as one would describe any other typography in the volume,
(7) Color. Indication should be made of whether the illustration is color-printed or hand-colored (that is, hand-colored, before publication, for the whole edition or some part of it, as opposed to the individual hand-coloring that might occur after publication), and the color, or prominent colors, identified.[49] If important variations in color are discovered through the examination of multiple copies, they should be specified.[50]
(8) Paper. The paper on which the non-letterpress material is printed, generally different from the paper for the letterpress, similarly can offer important evidence for dating and should be recorded in the same way that the paper constituting the letterpress sheets is recorded.[51]
(9) Bibliographical classification. Some remarks should be added that make clear the status of the plate as an independent entity. If, for example, no variations exist among copies of the plate as they are found within copies of the printing or issue of the book to be described, then strictly speaking perhaps no further comment is required. But if all those copies of the plate are in fact part of the second issue of the plate as separately published, that piece of information is a relevant addition to the description of the plate, even though it has not bearing on the classification of the book as a whole. If, on the other hand, copies of the plate do vary among copies of the printing or issue of the book, the variation would presumably already have been mentioned under one of the headings listed above. The variation, however, could result only in states of the plate, as far as the book is concerned; but if it happened that the variant plates actually constituted two issues as separately published, that fact could be reported here.
Descriptions on this level will not always be regarded as feasible: even Allan Stevenson normally listed plates selectively.[52] But when other aspects of a book are to receive detailed treatment, there is no justification
In addition to the description of the plates (or other materials) themselves, there is the question of recording their positions in the books in which they occur. Some difference of opinion has existed on this matter. Whereas Bowers takes it as a matter of course that plates and insets have "their positions noted in the description" (p. 288), Stevenson (despite his listing of "position of plates" as one of four items to be included in descriptions) remarks in an often cited (and misused)[53] statement:
In fact it matters very much simply because the plates are a part of the book, and one has not described the book without describing their relation to it. But beyond that, since plates are part of the content or "text" of a work, establishment of their positions is a substantive, not merely a formal, matter. Bridson points out, for example, the importance for the study of nomenclatural priority of reconstructing—in the case of books published in fascicles—exactly which plates appeared in each fascicle;[55] and he suggests some techniques of analysis, such as examining stab-holes, offset, staining, and the like, that can help in determining those original arrangements (p. 477). When directions for placing the plates—either as a list or as a statement on each plate—are published with a book, bibliographers have sometimes contented themselves with recording this intended order (which is, of course, important), without further investigating whether the plates originally appeared in a different order, as in fascicle publication. The separate parts of books published serially—whether novels or scientific works with plates—were intended to be bound together, and in their original form many of them are understandably scarce today. But bibliographers must attempt to locate them (not only for the arrangement of their contents but for the information printed on their wrappers) and, whether or not they can be found, must analyze whatever evidence is available in an effort to learn as much as possible about the history of the publication of the books being described. Bibliographers, in other words, cannot stop with a report of what publishers intended but must try to uncover the history of what they actually did. The fascicle order of plates, then, is important in its own right as a fact of publishing history but is also important for the light it may shed on textual and nomenclatural matters.[56] Naturally there may be times when there is insufficient evidence to enable the bibliographer to say anything about the locations of the plates in a volume; but the absence of such information ought to mean that the bibliographer
The practical question of how to list these locations therefore must be faced. We may begin by accepting the point established by Bowers, Stevenson, and others that it is a mistake to try to incorporate this information within the collation formula for the letterpress sheets. Of course when one is describing a book in which the non-letterpress material falls in a single block and is not interspersed through the letterpress leaves—as in a fascicle with the plates at the end or an atlas with a letterpress title page and introduction—there is no problem anyway, since the letterpress and non-letterpress do not intrude on one another. This kind of situation could easily be handled in some such manner as the following:
- 8°: A 8 B-D8, 32 leaves, pp. [4] I 2-59 60; plates I-V (facing B2v, B6, C4v, C8v, D3).
- Letterpress. 8°: A 8 B-D8, 32 leaves, pp. [4] I 2-59 60.
- Plates. I-V (B2v, B6, C4v, C8v, D3).
The inclusion of the plate collation adjacent to the signature collation (clearly the right spot for it) leads to the question where the other details about the non-letterpress material ought to be placed in the description. Conventionally there is a paragraph labeled "Plates" or "Illustrations" that brings together these details. Yet an exception is (rightly) made for an engraved title, which is treated along with the letterpress title page. Thus two principles are at work: the handling of the engraved title and of the plate collation supports the idea that the focus of the description is on the book as an entity and that both letterpress and non-letterpress material will be brought into the description under categories—such as "title page" or "collation"—that refer not to a method of printing but to a characteristic of the completed book; the presence of a "Plates" paragraph, on the other hand, suggests an organization in which the method of production of the material takes precedence over its function in the book. The point is perhaps most clearly illustrated with reference to the description of paper: should the paragraph on plates include a description of the paper used for the plates, or should that description come in the paragraph on paper, which takes up the paper found elsewhere in the book?[58] If one answers that logically the paragraph on paper should include all papers in the book, whether used for letterpress or non-letterpress, one is really taking a stand on the question whether or not a book is fundamentally "complete" when its letterpress is complete. The implied answer is that if the book included plates
Books containing non-letterpress material present such a multitude of different situations that bibliographers will inevitably have to make their own adjustments in individual cases, and it is not my aim to try to suggest a simple formal arrangement to be used on all occasions, for that aim is unrealistic. Rather, what I am concerned with is the point of view or general approach that underlies bibliographers' treatment of non-letterpress material. Central to the view I have expressed here is the proposition that the same standards and procedures of classification and description are appropriate and desirable for both non-letterpress and letterpress material. This view further implies that both are equally deserving of the bibliographer's full attention: both are part of the contents, physically and also intellectually, of the books in which they appear together. Non-letterpress material may seem more directly relevant to the intellectual content of books in some fields than in others. One may, for instance, think first of natural history books when reading a comment like W. M. Ivins's on pictures "made to convey visual information":
Nevertheless, it is true that the exact nature and role of non-letterpress material varies from field to field, and interdisciplinary cooperation is especially important for the growth of bibliographical knowledge in this area. Bibliographers must take the broad view, and see their own particular problems of description in the context of non-letterpress description in general, if they are to benefit as fully as possible from relevant advances already made and if they are to produce bibliographies that meet as fully as possible the needs of users from different fields. Allan Stevenson was well aware of the mixed audience he was serving in the Hunt catalogue, and he has a great deal to say about the use of his catalogue by botanists and students of the graphic arts as well as by collectors and other bibliographers. "Those parts of the description are most successful," he says, "which prove of value to the botanist and these others at one and the same time" (p. cxciii). Or, as he puts it more succinctly, "Bibliography prefers to serve not one but all." In order to do that, all must cooperate, and Stevenson expresses the hope that bibliographers and scientists will "agree to use their special funds of experience and information to the common end of good descriptions." All who deal with the history of books, regardless of the field, do of course have common goals, and all their work is interrelated. The study of non-letterpress material in books provides a particularly forceful illustration of this basic point.
Notes
For a full discussion, see Fredson Bowers, Principles of Bibliographical Description (1949), esp. pp. 40-108, 393-426; and G. T. Tanselle, "The Bibliographical Concepts of Issue and State," PBSA, 69 (1975), 17-66.
As opposed to plates, or other illustrations, that individual owners have had bound into books. A descriptive bibliography is normally concerned with the printing and publication history of books, not with the subsequent alterations made by owners in particular copies. Of course, a bibliographical catalogue of a single collection is necessarily concerned with particular copies and may provide full descriptions of them; some "extra-illustrated" copies are in fact of great interest and are well worth describing in detail.
For a useful survey of the field, with many references to the earlier literature, see Robert W. Karrow, Jr., "Cartobibliography," AB Bookman's Yearbook, 1976, 1:43-52. The pioneer is usually considered to be Herbert George Fordham, who in 1901 set forth his methods for dealing with maps of Hertfordshire in the Transactions of the Hertfordshire Natural History Society and then printed a revised version in Studies in Carto-Bibliography, British and French, and in the Bibliography of Itineraries and Road-Books (1914) as the fifth chapter, "Descriptive Catalogues of Maps: Their Arrangement, and the Details They Should Contain" (pp. 92-118). In his recommendations for descriptions with "full detail," he recognized the importance of watermarks, and he specified that the book from which a map "is taken or with which it was published should be fully noted" (p. 99). R.A. Skelton, in Decorative Printed Maps of the 15th to 18th Centuries (1952), states that the "terms used in carto-bibliography . . . differ from those of book-bibliography" (p. 4), and his summary is based on the practice of the British Museum map catalogue, although he must admit, "There is no general agreement on the use of the terms 'issue' and 'edition' when applied to maps." Nearly two decades later Skelton could still say that "the sooner we have a common language of analysis, identification, and description in which to speak to one another, the better"; see his Maps: A Historical Survey of Their Study and Collecting (1972), esp. pp. 103-105. In the same year as Verner's essay, David Woodward remarked that carto-bibliography was "still in its infancy" and that it "does not yet even have established definitions of the terms used" (p. 113); see "The Study of the History of Cartography: A Suggested Framework," American Cartographer, 1 (1974), 101-115.
Two years later, in his summation at the 1976 ACRL Rare Books and Manuscripts Preconference, Verner mentioned Karrow's statement (in the paper cited in note 3 above) that the methods and terms of descriptive bibliography are applicable to maps and then added: "As a sometime cartobibliographer my first inclination is to support that position, yet the more I play at studying maps the more I come to realize that similarity does not justify an assumption of identicalness" (AB Bookman's Yearbook, 1976, 1:71-72). He is unfortunately correct when he goes on to say that bibliographers sometimes "tend to shun the maps contained in the books they describe" (although I would say they do so for different reasons from the ones Verner implies).
This is not intended as a comprehensive definition. I have attempted such a definition in "The Bibliographical Concepts of Issue and State" (see note 1 above), p. 65. The definitions set forth there are printed in shorter form in Bibliographic Description of Rare Books (Library of Congress Office for Descriptive Cataloging Policy, 1981), pp. 61-62.
Verner seems not to understand fully the two definitions he cites. He quotes McKerrow's definition as "'the whole number of copies of a book printed at any one time or times from one setting-up of type.'" He then says that "Bowers expands this to include '. . . all issues and variant states existing within its basic type-setting, as well as all impressions.'" Bowers's statement, however, does not expand or enlarge the definition; it is more precise and explicit than McKerrow's, but it coincides with McKerrow's perfectly.
Even so, neither "plate" nor "plates" seems a satisfactory collective noun to equate with "edition."
An indication of the difficulty of comprehending this passage is afforded by the fact that this definition of "edition" is attributed to Skelton. Yet two sentences earlier Skelton's use of the term was apparently rejected: "By Skelton's definition . . . edition is synonymous with state as defined herein and is therefore redundant."
But not always: differences in inking, for example, or foreign matter on the type forme at the time of printing might create different states in the printed product, without reflecting differences in the type itself.
The ISBD (CM): International Standard Bibliographic Description for Cartographic Materials (1977) makes provision for "multi-level description," one level relating to the entire book, another to the individual maps. (Its focus, of course, is library cataloguing, not full-scale bibliographical description.)
Verner's final comment on "state" is hard to comprehend, especially in light of the fact that he accepts the term as a useful one in carto-bibliography. A paragraph headed "Variant state" reads: "Like the term issue, the term variant state has a very precise meaning in bibliographical description for which there is no equivalent in carto-bibliography, consequently the term variant state should not be used with reference to maps" (p. 86). What distinction he is making between "state" and "variant state" is difficult to see: there is no need to use the word "state" in the first place unless some difference is involved, and thus a state is by definition "variant" from another state.
He then lists two exceptions: when "plate wear has caused imperfect printing" (although, he points out, this process is so "gradual" that it does not "permit the assignment of the precise time the particular copy was pulled"), and when "dated watermarks in the paper show a sequence of printing over time." Both these kinds of evidence are tricky; and in any case the determination of "a sequence of printing over time" or "the precise time" when a copy was printed—obviously valuable information to establish—is not the same thing as assigning copies to discrete printings.
He adds that normal plate wear is "not considered to be a change in the plate," although evidence of wear "would be noted when appropriate." One can agree that normal wear does not necessarily produce a state, but it would be unfortunate if his discussion were taken to mean that states can be produced only by intentional action, for they can also result from accidents to which a plate is subjected.
Some differences might result from the process of printing. Cf. the discussion of "variant copy" that follows.
This problem is concisely illustrated by a passage in another of Verner's papers, "Carto-Bibliography," Western Association of Map Libraries Information Bulletin, 7, no. 2 (March 1976), 31-38. In a brief section on description, he says: "Although the description is derived from a printed map it is actually the plate from which the copy was printed that is being described. This is done indirectly, of course, since the plate itself can be studied only through an examination of the impressions pulled from it" (p. 35). (This paper is reprinted, slightly revised, as "The Study of Early Printed Maps" in AB Bookman's Weekly, 58 [12 July 1976], 194, 198, 200, 202-204, 206.)
A more puzzling, but less significant, question is why Verner felt the need to define "change" as a technical term, and one applicable only to maps: he had already defined "state" and indeed had said there that its use in letterpress description essentially coincided with its use in carto-bibliography.
As when he says that edition is "determined by one thing only—the imprint" (p. 88). He devotes a chapter to matters of "Cartographic Nomenclature" (pp. 83-89).
And before his earlier article on "Criteria for Classifying Hand-Printed Books as Issues and States," PBSA, 41 (1947), 271-292.
Krummel is said on the title page to have "compiled" the work, and he asserts in his "Acknowledgments" that the book should be "viewed as a group effort." Nevertheless, he is responsible for the final form of the text; and the section on terminology that is to be discussed here is one that he explicitly accepts more responsibility for (in that section, he says, "I will concede to having pressed the case for several favorite interpretations").
This position had previously been supported in general terms by some prominent writers on music bibliography. C. B. Oldman, for instance, in "Collecting Musical First Editions," New Paths in Book Collecting, ed. John Carter (1934), pp. 93-124, says that, although some modification of the usage of book collectors may be unavoidable, "there seems no justification for any radical departure from current usage" (p. 105). Cecil Hopkinson, in "The Fundamentals of Music Bibliography," Journal of Documentation, 11 (1955), 119-129 (reprinted in Readings in Descriptive Bibliography, ed. John Bush Jones [1974], pp. 57-70), asks whether the descriptive bibliography of music is "the same as that of books," and he answers, "I cannot see that it differs greatly" (p. 120 [58]). (Contrast the report of the panel discussion led by Hopkinson, "Towards a Definition of Certain Terms in Musical Bibliography," in Music, Libraries, and Instruments, ed. Unity Sherrington and Guy Oldham [1961], pp. 147-155, where Richard S. Hill is said to have favored "a more adult approach to music-bibliography . . . as he was fearful of it becoming far too much like book-bibliography"—because musicians are "not interested in variants of a typographical nature" [p. 152]. O. E. Deutsch also took the position that terms from letterpress bibliography are not appropriate for music [p. 149]. In a significant earlier article, "Music Bibliographies and Catalogues," Library, 4th ser., 23 [1942-43], 151-170, Deutsch had said that music books "are in many respects more closely allied to maps than to type-set books" [p. 151].)
The wisdom of saying "the same printing surfaces" can be questioned. For example, copies printed from standing type and from stereotype plates made from that type are parts of the same edition, but two different printing surfaces are involved. What links such copies (or others produced by offset from them) is that they all reproduce the results of a single act of typesetting. One should probably refer, therefore, to acts of typesetting, engraving, and so on.
That is, in this sense. "Plate" is of course commonly used as a collective noun when referring to pieces of silverplate and could be similarly used for a group of copper-plates or stereotype plates.
The use of "re-issue" here could also be refined. The item is a reissue from the point of view of the publication history of each of the individual selections: part of the edition of each of the selections was reissued in the composite volume. But that volume of selections as an entity had not appeared before, and therefore the volume itself is not a reissue.
Krummel glosses this sentence in his "Supplement to the Guide for Dating Early Published Music," Fontes artis musicae, 24 (1977), 175-184: "It should be understood that the word 'text' here refers to a physical presentation . . . but not necessarily a different content" (p. 176).
The same point is made again when the term "version" (referring to the "content" of a work) is introduced for the use of editors: "Different versions may be manifest in different editions or states, but rarely in different issues" (p. 48).
In discussing issue earlier, he claims that "most re-issues of music are the result of a new printing of copies" (p. 31).
The next paragraph, analyzing another example, cites the following among the characteristics producing a "new issue": "Title-page references changed," "New prices, engraved," "New street addresses," "New publisher." Impression is not mentioned; but if any of the changes mentioned coincided with a new impression, they would not be signs of issue, unless one defines issue in such a way that it subsumes impression.
In Krummel's impressive survey of the various physical aspects of musical documents and prints, "Musical Functions and Bibliographical Forms," Library, 5th ser., 31 (1976), 327-350, there is a section on engraved editions that continues to refer to "standard edition-issue-state-impression terminology" (p. 337). (He adds that his discussion of these matters in the Guide was "greeted with a mixture of indifference and hostility." The Guide, he continues, "offers nothing more than a sketchy outline for a bibliographical method appropriate to published music since 1700.")
The inclusion of the phrase "earliest copy" is questionable. Although one is interested in the earliest form of a publication, one must also—as a historian—be interested in every other form, so long as it is a form put on sale by the producer or publisher and not a form put together by someone else after publication. Two pages later Krummel defines "earliest copy" as "a hypothetical copy which was printed as part of the first impression and offered for sale on the very day of publication," and he then adds that this idea is "a counterpart to the general bibliographer's concept of 'ideal copy.'" But ideal copy refers not simply to the earliest published form but to any published form—as opposed to forms produced, by accident or design, in the course of the post-publication history of the copies. (Cf. note 54 below.)
This is not the place to present detailed definitions of these terms. Their signification should in fact be evident from the foregoing discussion; and full definitions can be found in print in the Bowers and Tanselle works cited in note 1 above.
Just as the context will normally indicate whether "plate" is being used to refer to the printed impression or to the engraved plate itself—though to avoid possible ambiguity, "copperplate" or simply "copper" should be used in the latter instance. (On this and related matters I have benefited from discussions with Thomas V. Lange.)
Printings are often, but by no means always, labeled for what they are or readily distinguishable by date or other prominent feature. In any case, since printing subsumes issue in the classification, the determination of separate printings takes precedence over the establishment of characteristics of issue. A new printing is regarded bibliographically as a discrete group of copies representing a publishing decision, even when it is not easily distinguishable from the preceding printing and when the publisher is not taking a different approach to the marketing of the work. Bibliographers must be concerned with both production and publication history, as the terms printing and issue suggest; that a given group of copies comes from a separate press run is a basic physical fact that is unavoidably a fact of publication history as well. (There are instances when it is more difficult to accommodate printing and publishing history at the same time, as when duplicate sets of stereotype plates produce separate, but simultaneous, sequences of printings. For such situations, James L. W. West III has suggested the term "plating," falling between edition and printing in the hierarchy; he is presently doing further work on this concept, which he introduced in William Styron: A Descriptive Bibliography [1977], where he attributes the idea to Joseph Katz. For some further comments on this general problem, see my discussion of Bowers's term "subedition," in "The Bibliographical Concepts of Issue and State" [note 1 above], pp. 57-62.)
"Bibliography—An Apologia," Library, 4th ser., 13 (1932-33), 113-143; reprinted in his Collected Papers, ed. J. C. Maxwell (1966), pp. 239-266. The discussion of illustrations from which the quotations here are drawn is on pp. 117-118 (243-244).
He says that "All illustrations are of course recorded in the list of contents" (p. lxiv); but they are not described because his practice is to reproduce most of them in his section of plates. However, states of engravings "are described so far as they have been ascertained" (p. lxxii). (See also pp. xlviii, cxxxiv, and cxliv.) Because inserted plates occur infrequently in the books Greg describes, he did not find it confusing to include references to them in his signature collations, even though the method he used (e.g., "C3+1") is the same as that employed for letterpress insertions.
He also treats engraved title pages very briefly (p. 76), suggesting that the engraved part be identified by a reference to a published illustration or described in the notes at the end of the whole description.
Depending on whether signature or page references are used elsewhere in the description. For modern books page numbers may prove more convenient (see p. 446).
As Bowers points out, engraved leaves or folds that were also put through the printing press to receive letterpress would qualify for inclusion in the signature collation.
He also introduces a convenient device of using the Greek letter lambda (followed by a plate number) to "signify an unsigned, unpaged leaf of letterpress opposite (or associated with) a plate" (p. cxlvii).
Further discussion of analytical and descriptive bibliography supported by the Hunt Botanical Library includes Ian MacPhail's "An Introduction to Bibliography for Botanists," Huntia, 1 (1964), 103-115. See also W. D. Margadant, "Descriptive Bibliography Applied to Botany," in Early Bryological Literature (1968), pp. 1-33.
"The Treatment of Plates in Bibliographical Description," Journal of the Society for the Bibliography of Natural History, 7, part 4 (1976), 469-488.
Cf. G. T. Tanselle, "Tolerances in Bibliographical Description," Library, 5th ser., 23 (1968), 1-12; reprinted in Readings in Descriptive Bibliography, ed. John Bush Jones (1974), pp. 42-56.
Bridson says, "It is essential that a bibliographical description of a plate should enable a distant reader to make a critical comparison with his own copy of a book, a situation that letterpress bibliography already fulfils" (p. 474). Although this statement is overly sanguine about the accomplishments of letterpress bibliography, the general approach it endorses is obviously to be encouraged.
This practice would be useful, for instance, in a case where one picture replaces another as the illustration for a particular quotation from the work being illustrated.
"The bibliographer," in his words, "needs to be able to describe some of the elements of syntax involved in making different processes of printed picture as well as being able to describe the graphic medium" (p. 473). One should consult Bridson for a concise listing of some of the variations in the ways etchings or lithographs or photoengravings can be produced, and for citations of books that may be of help with this matter (pp. 482-483). See especially William M. Ivins, Jr., Prints and Visual Communication (1953); Estelle Jussim, Visual Communication and the Graphic Arts: Photographic Technologies in the Nineteenth Century (1974); and Frank P. Restall, "The Printing of Illustrations," in Catalogue of the Edward Clark Library, ed. P.J.W. Kilpatrick (1976), pp. 407-524. For maps, see Five Centuries of Map Printing, ed. David Woodward (1975), and Woodward's "The Form of Maps: An Introductory Framework," AB Bookman's Yearbook, 1976, 1:11-20. For music, see the Guide for Dating Early Published Music, esp. pp. 75-101; D. W. Krummel, English Music Printing, 1553-1700 (1975); Richard J. Wolfe, Early American Music Engraving and Printing (1980); Krummel, "Graphic Analysis: It's Application to Early American Engraved Music," Music Library Association Notes, 2nd ser., 14 (1959), 213-233; and H. Edmund Poole, "Music Printing," in The New Grove Dictionary of Music and Musicians (1980), 15:232-260.
Cf. G. T. Tanselle, "The Identification of Type Faces in Bibliographical Description," PBSA, 60 (1966), 185-202.
Cf. G. T. Tanselle, "A System of Color Identification for Bibliographical Description," Studies in Bibliography, 20 (1967), 203-234; reprinted in Selected Studies in Bibliography (1979), pp. 139-170.
Bridson reports that color plates sometimes have pin-holes or register marks that may be useful evidence for bibliographical analysis (p. 474).
Cf. G. T. Tanselle, "The Bibliographical Description of Paper," SB, 24 (1971), 27-67; reprinted in Selected Studies, pp. 203-244. (This essay includes comments on the important contributions of Allan Stevenson to paper study.)
One should turn to his descriptions in the Hunt catalogue for examples of variations in treatment according to the perceived significance of individual books.
As in Lorene Pouncey, "The Fallacy of the Ideal Copy," Library, 5th ser., 33 (1978), 108-118, which quotes the statement in a climactic position as "approbation for the preceding discussion" (p. 117)—a discussion that grossly misunderstands ideal copy as a concept related to "the human 'habit of perfection'" (p. 115).
Especially since the production of plates sometimes fell behind the production of letterpress, and the plates therefore did not always relate to the text in the same fascicle.
For an excellent description of a botanical plate book in fascicles, see Günther Buchheim, "A Bibliographical Account of L'Héritier's Stirpes novae," Huntia, 2 (1965), 29-58. See also Ian MacPhail, "Titford's Hortus botanicus americanus," Huntia, 1 (1964), 117-135.
When the plates are not numbered, one can give only a bracketed total—e.g., "plates [5] (B2v, B6. . .)"—as Bowers explains on p. 288.
A similar point could be made about typography and lettering, although it is complicated by the fact that some letterpress can appear on the same page as an engraving. But should the hand lettering in an engraved plate (transcribed as part of the contents of the plate) be described in the account of plates or in the paragraph on typography (enlarged to include lettering)?
| ||